Thank you for exhibiting at this show. When we started the search for experimental Minneapolis Moline tractors back in the 1980's we thought those that were on the farm operated by our Dad were the only ones. We learned that there were (maybe still are) many others. Hopefully more will be found and we can attend more shows focused on prototypes. It was an absolute pleasure to meet you and Senior and spend time learning. I love the channel and this week-end was special.
Toby, I had been trying to get that brick to you all summer, missed you at the rained out swap meet earlier this year. I almost drove it up to Tobies Restaurant in Hinkley to leave it there for you to pick up but decided to take a chance I could make it to Scott Carver. There is much story to tell about MSM, TCTM and MM, we have a long familial connection to the company of which I am very proud that goes back well before the '29 merger. All the positive comments you see about your videos, you understand speak to your character. One of my favorites was when you finished the rock feature and sat on the D2 with the sunset, brought a tear.
When I got out of the army in late 1969, I was job hunting all over the Twin Cities metropolitan area. I inquired about the Lake Street plant with different job service offices. I had known several former MM employs. They all recommended that I would be better off staying away from MM. Most of them said that it was doomed to fail. I do remember how big it was in the heart of Minneapolis. It was an amazing place to see. And just like that it was all gone. Looked like a big hole. Again, your visit to these shows brings back many memories of growing up in a farm community. I did have an opportunity to drive a hand clutch R. My dad rented land from a neighbor close to Geneva Minnesota. For me it was a clumsy machine. I was used to a foot clutch. Never did find out what happened to that tractor. All traces of the neighbor's land, house, and machinery are gone. Except for my memory of him and his wife.
Nicely done, I also attended the show, I was the dork running the Linotype machine in the print shop, small world, keep the passion and history alive! 😃
It was nice meeting you , thanks for taking a few min to chat , I have a mold that I made for a tractor puller for the ZB rad/grill if you want a cool wall hanger for your shop 😁
Awesome work!!! The brick is a great addition. Keeping history alive!!! Thank you for sharing and investing your and seniors time to make it all happen!!!!
Thanks for sharing and thanks for the shout out! I get a lump in my throat when I think about all it took to design and build these tractors and implements (any brand), keeping these tractors in running and show quality shape, looking at the group of mostly elderly men and women that have done all of the work then looking around me at this event and seeing all the young boys and girls that are showing an interest. I hope the later generations can keep this going. I worry about what is the old iron landscape going to look like 20, 40 and 60 years from now?
Toby, you restore tractors and things because it's a link to the past. If someone didn't do this we would never remember the past. It keeps a little bit of history alive. I love model trains and I love to get the older trains working. Keep doing what you are doing. I love watching your channel and maybe someday I will see you at a show.
That G706 was a nice tractor! It being a 1962, I can relate to it. I was born 8-8-1962. I wish I looked as good as that tractor. Thanks for the tour of the show. Nice machines there.
Wow the smoke stack brick was awesome and that fella thought about you first to save and give you the number 1of 50 that are/were being given out. To have number 1 in a series of collectables is always neat. 👍
I farmed just a bit east of Jordan in the 1970's. At that time Schmitz Equiptment sold White and Moline tractors just outside of town. They also sold New Holland hay equiptment. I bought an old ZA from the original owner at an auction in Carver County, drove it home, I also had a moline pull type swather that I pulled behind the ZA. It had the hand clutch. Later I used it as an auger tractor. Great little tractor. I also had the big Moline corn sheller, used it until the last year I farmed, with it run by my 4020 that sheller would shell a lot of corn.
Excellent video it's a labor of love and appreciation for the machines that built the country and saved the world during the war times Minneapolis Moline was very much involved in the world War II defense building war machines and some tractors during the war it really makes a person think about how fast the agricultural tractors and machinery prior to WWII were ground driven and hand crank start and after the war was over it was a oddity to have ground driven machines mostly everything went to pto driven and electric start it like a coming of age Era like no one company dared to venture out and have every modern feature on their tractors except Minneapolis Moline with the UDLX tractor and it was not a good seller if it would have come out after the war it would have been on most every farm. Every time I go to the tractor shows I like to look at the progression of the new features on every tractors even year to year there can be changes. Keep up the great videos
Fantastic coverage of what looked to be a great event 👌 thank you for sharing something that many of us will ever witness due to our global location 👍👍
I had the privilege of being able to show the number 1 ,2 star crawler several years ago, probably 20 years ago , was owned by a gentleman in pa at that time . My dad collected MM tractors till he passed in 2006 . We sold off most of them in 2007 ,49 runners and 380 lit pieces 100 plus skids of parts , i had i love hate relationship with them tractors.
Fantastic video Squatch! Minneapolis-moline made alot of very nice looking tractors. The deck of cards is super neat and that brick from the miniapolis smoke stack is an amazing piece of history. Thanks for sharing and explaining some of the differences between the different models. Cheers
My dad had a MM Model E corn sheller with a 283 MM stationary engine on it, had a starter on it, but hand cranked it many times. Sold it to the Amish on the Iowa Minnesota border many years ago, wish I still had it. Sweet running engine.
What a great show. I kind of knew about MolineDan's channel before. RUclips algorithm works in strange way's LOL. However im really seeing what made M-M stand out from the rest. They really loved to experiment with things and despite the first prototypes being somewhat crude and unfinished. It still shows they where not afraid of any new ideas. The Cast iron PTO shield is one that made my head scratch for a lot of reasons.
A great show - wish I could have made it down but after 10 hours on the road on Saturday, and the expected weather that was coming Sunday I decided it would've been a wasted trip. Thanks for the show tour!! So much cool MM to see!
Amazing content as always, I literally laughed out loud when you showed the propane R. The fellow who owns that lives about 10 miles from me here in MI. They have a very extensive collection of MM stuff and they were a Dealer back in the day. But you always know how to hit an old iron collector in the soft spot, the fellowship and the experience along with the tangible links to the past like the brick from the smokestack. Its an experience like none other I have ever felt in my life and it makes it all worth the effort and expense.
Very enjoyable video. If you get a chance in the future get your old Cats out and run them a little bit. Really enjoyable to see and hear them running. Again, Thanks for the videos of all the antique MM tractors and crawlers. Sam
@@squatch253no worries i was in Vegas last week working a trade show talk to way to many people didn’t remember someone on my return flight i had talk to sometime and knew he was from mn 🤪
Oh my! A brick from the Lake Street Minneapolis Steel and Machinery plant's foundry stack! That is a small piece of a huge legacy! Very neat momento. The forefather's brands before March 30, 1929 get lost sometimes in a huge sea of excellent Minneapolis Moline products. Nice video!
11:12 Oh... that's a nice tractor. Which is hard to say, because everything shown so far was nice and i'm sure all that will follow are also gonna be nice. Man... if i wasn't stuck with work... kind of jealous, not gonna lie. At least i get to see the pre-show. :) Thanks Squatch!
Looks like a fantastic show with awesome displays! Wish there were more of these out west here. Truly is still history in the making to see so many prototypes in the same place. Always makes me happy to see folks enjoy them and care for them. 👍
I wish I could give it two thumbs up!! I love listening to you talk about machines with the passion and knowledge you have! I only wish I could go to these shows but since I cannot it is great to see your videos! Thank you 😊
I remember the lake street plant and all the tractors parked outside there was neighbor when I was growing up worked at the Hopkins MN plant and offices
Great video. As some else said in the comments it's great have people like you preserve tractor history. Moline tractors has always been one of my favorites then case then international. We had a case on the farm when I was young. Thanks for a great video.
14:00 possibly because at the time, casting was still cheaper than stamping? After all, for casting, you just need to use what was existing to that point, for stamping, you'd need a big press (or the time on it) and custom made press stamps, because with that shape, i'd expect at least 4 stages to obtain the part (cut > preliminary shape > finite > trim). Dunno, just guessing. Sidenote: you know something's old when they use EX instead of X. I've always wondered what prompted the drop of the E...
Very neat gathering of prototypes, would have been a great show to be at. Like you said, it is a lot of work, and a lot of people don't realize how much effort goes into bringing a tractor to a show. Let alone the restoration and maintenance of the machine. Thank you for doing what you do, without people like you shows would not be worth going to. When you get X231 done and ready to bring it to a show, I'll have to make a point to be there for it.
Really Cool stuff right there, I really enjoyed this one. Here is a bit of MM trivia for Ya. When I was a kid, we had a neighbor that had a MM married to a Farmall M or maybe a MD. IM not sure now,but he farmed a lot of ground, with it. Thanks again for Sharing 😊
Back in the late 70's through to the early 90's I exhibited an number of stationary engines at country and steam fayres herein the UK. It was customary to be given an exhibitors plaque or horse brass, and I've kept all mine. I was looking at them not long ago and it brings back memories of the shows. A lot of the guys involved back then were getting quite old and I guess not with us any longer so to me its about memories and keeping the past alive, not just in static museums. Here now health and safety is limiting a lot of these shows and also many annual ones no longer run because of this, so do all you can to keep it going.
It has been said " Those who dare, win". Anyone can sit and watch, but you Toby and Angry Dan and all of the other exhibitors, and yes even Kyle have driven need to follow these things down to the last degree. Your good efforts have garnered now, two bits of "Unobtanium". The center support rollers for "Swamp Angel", and now a verifiably rare 1 of 50 smoke stack bricks from the MM foundry. Didn't they build that first, before the rest of the foundry? What a well regarded man you are, Toby. Congrats, please continue to put out videos like this for those of us who get your point. Thanks
I am going to the Albert City Threashermen and Collectors show this weekend by Albert City Iowa. This year i believe they are spotlighting Allis Chalmers. Gathering of the orange, this year marks the 70th year of the WD-45 and the 50th year for the 7000 series.
We are blessed to have people like you who are willing to preserve tractor history.
I'm not a MM enthusiast so to say but it was neat to see that 1355 and how it has the same back end as the Oliver tractors of the same vintage 👍
Thank you for exhibiting at this show. When we started the search for experimental Minneapolis Moline tractors back in the 1980's we thought those that were on the farm operated by our Dad were the only ones. We learned that there were (maybe still are) many others. Hopefully more will be found and we can attend more shows focused on prototypes. It was an absolute pleasure to meet you and Senior and spend time learning. I love the channel and this week-end was special.
Was good talking to you Saturday afternoon Rick. Thanks for the history.
@@crazydave4455 I really enjoyed the conversation. I learned from you and everyone I spoke with.
The other prototypes are so cool! What a neat history!
It still makes me sad when you showed the UDLX tractors to think about a prototype possibly sitting in the same field as X-231.
Toby, I had been trying to get that brick to you all summer, missed you at the rained out swap meet earlier this year. I almost drove it up to Tobies Restaurant in Hinkley to leave it there for you to pick up but decided to take a chance I could make it to Scott Carver. There is much story to tell about MSM, TCTM and MM, we have a long familial connection to the company of which I am very proud that goes back well before the '29 merger. All the positive comments you see about your videos, you understand speak to your character. One of my favorites was when you finished the rock feature and sat on the D2 with the sunset, brought a tear.
When I got out of the army in late 1969, I was job hunting all over the Twin Cities metropolitan area. I inquired about the Lake Street plant with different job service offices. I had known several former MM employs. They all recommended that I would be better off staying away from MM. Most of them said that it was doomed to fail. I do remember how big it was in the heart of Minneapolis. It was an amazing place to see. And just like that it was all gone. Looked like a big hole. Again, your visit to these shows brings back many memories of growing up in a farm community. I did have an opportunity to drive a hand clutch R. My dad rented land from a neighbor close to Geneva Minnesota. For me it was a clumsy machine. I was used to a foot clutch. Never did find out what happened to that tractor. All traces of the neighbor's land, house, and machinery are gone. Except for my memory of him and his wife.
Nice day thanks for taking us along. Some super rare orange 🍊 iron in that field
Nicely done, I also attended the show, I was the dork running the Linotype machine in the print shop, small world, keep the passion and history alive! 😃
It was nice meeting you , thanks for taking a few min to chat , I have a mold that I made for a tractor puller for the ZB rad/grill if you want a cool wall hanger for your shop 😁
Dang! KC was there and I missed him!
Glad to see that you made it back home and all went well for you.
Awesome work!!! The brick is a great addition. Keeping history alive!!! Thank you for sharing and investing your and seniors time to make it all happen!!!!
To reach into the past for minute details is a humbling experience. Thank you Toby and Senior.😌👍
Thanks for sharing and thanks for the shout out! I get a lump in my throat when I think about all it took to design and build these tractors and implements (any brand), keeping these tractors in running and show quality shape, looking at the group of mostly elderly men and women that have done all of the work then looking around me at this event and seeing all the young boys and girls that are showing an interest. I hope the later generations can keep this going. I worry about what is the old iron landscape going to look like 20, 40 and 60 years from now?
You did a nice job there Squatch !
It was a pleasure meeting you and moline dan Friday. It was a good show, I'm glad I made the trip. Keep up the great work.
Toby, you restore tractors and things because it's a link to the past. If someone didn't do this we would never remember the past. It keeps a little bit of history alive. I love model trains and I love to get the older trains working. Keep doing what you are doing. I love watching your channel and maybe someday I will see you at a show.
I just love the look of those two crawlers. Actually - all the old iron there is just so dang good looking. Thanks much for taking us along with you!
Cool channel, cool videos !
Bravo
That G706 was a nice tractor! It being a 1962, I can relate to it. I was born 8-8-1962. I wish I looked as good as that tractor. Thanks for the tour of the show. Nice machines there.
Wow the smoke stack brick was awesome and that fella thought about you first to save and give you the number 1of 50 that are/were being given out. To have number 1 in a series of collectables is always neat. 👍
I farmed just a bit east of Jordan in the 1970's. At that time Schmitz Equiptment sold White and Moline tractors just outside of town. They also sold New Holland hay equiptment. I bought an old ZA from the original owner at an auction in Carver County, drove it home, I also had a moline pull type swather that I pulled behind the ZA. It had the hand clutch. Later I used it as an auger tractor. Great little tractor. I also had the big Moline corn sheller, used it until the last year I farmed, with it run by my 4020 that sheller would shell a lot of corn.
I couldn't attend, so it's sooooo nice when quality videos like this come out. WOW the smoke stack brick!
Cool show. Some very nice tractors there .
Just wow on the brick. So very cool.
Good video
Excellent video it's a labor of love and appreciation for the machines that built the country and saved the world during the war times Minneapolis Moline was very much involved in the world War II defense building war machines and some tractors during the war it really makes a person think about how fast the agricultural tractors and machinery prior to WWII were ground driven and hand crank start and after the war was over it was a oddity to have ground driven machines mostly everything went to pto driven and electric start it like a coming of age Era like no one company dared to venture out and have every modern feature on their tractors except Minneapolis Moline with the UDLX tractor and it was not a good seller if it would have come out after the war it would have been on most every farm. Every time I go to the tractor shows I like to look at the progression of the new features on every tractors even year to year there can be changes. Keep up the great videos
need to have a good place to keep that brick !! ( WOW THAT IS A KEEPER ) !!good video and show !!
Fantastic coverage of what looked to be a great event 👌 thank you for sharing something that many of us will ever witness due to our global location 👍👍
THAT was a lot of fun, Toby!
I had the privilege of being able to show the number 1 ,2 star crawler several years ago, probably 20 years ago , was owned by a gentleman in pa at that time . My dad collected MM tractors till he passed in 2006 . We sold off most of them in 2007 ,49 runners and 380 lit pieces 100 plus skids of parts , i had i love hate relationship with them tractors.
Fantastic video Squatch! Minneapolis-moline made alot of very nice looking tractors. The deck of cards is super neat and that brick from the miniapolis smoke stack is an amazing piece of history. Thanks for sharing and explaining some of the differences between the different models. Cheers
My dad had a MM Model E corn sheller with a 283 MM stationary engine on it, had a starter on it, but hand cranked it many times. Sold it to the Amish on the Iowa Minnesota border many years ago, wish I still had it. Sweet running engine.
Amazing that there's still that many MM tractors like that. You and those ppl sure have done a nice job on keep those going!!
Geeeez does that crawler of yours sound immaculate.
Great overview video.
But that outro was second to none. Beautifully worded. As a spectator at shows I truly do appreciate the effort you put in.
What a great show. I kind of knew about MolineDan's channel before. RUclips algorithm works in strange way's LOL. However im really seeing what made M-M stand out from the rest. They really loved to experiment with things and despite the first prototypes being somewhat crude and unfinished. It still shows they where not afraid of any new ideas. The Cast iron PTO shield is one that made my head scratch for a lot of reasons.
Evidently the YT wasn't there ?
Learn saw it in Albany in 2017.
Thank you.
Love the history behind these beautifully restored Minneapolis Moline tractors. Your knowledge is amazing, thank you for sharing with us
A great show - wish I could have made it down but after 10 hours on the road on Saturday, and the expected weather that was coming Sunday I decided it would've been a wasted trip. Thanks for the show tour!! So much cool MM to see!
Best looking tractors ever made!
Amazing content as always, I literally laughed out loud when you showed the propane R. The fellow who owns that lives about 10 miles from me here in MI. They have a very extensive collection of MM stuff and they were a Dealer back in the day. But you always know how to hit an old iron collector in the soft spot, the fellowship and the experience along with the tangible links to the past like the brick from the smokestack. Its an experience like none other I have ever felt in my life and it makes it all worth the effort and expense.
thanks for a great show and the amazing knowledge you share.
Nice, I should have made the trip up there.... Glad You have those M-M's in your collection!
Man the knowledge u have on all these different tractors is unbelievable! Definitely some awesome rare tractors. Thanks for the video.
Very enjoyable video. If you get a chance in the future get your old Cats out and run them a little bit. Really enjoyable to see and hear them running. Again, Thanks for the videos of all the antique MM tractors and crawlers.
Sam
Interesting iron....thanks for the tour Sir
The walk around wouldn't be the same without you giving the tour!
Excellent coverage!
That NT Clone for what it is is an astonishing piece of work thanks for the well spoken intro to it well done
It was great to meet you on Saturday keep up all the great work hope to see you another time soon
@@squatch253no worries i was in Vegas last week working a trade show talk to way to many people didn’t remember someone on my return flight i had talk to sometime and knew he was from mn 🤪
Thank You
such a rare collection and in such excellent condition!
Oh my! A brick from the Lake Street Minneapolis Steel and Machinery plant's foundry stack! That is a small piece of a huge legacy! Very neat momento.
The forefather's brands before March 30, 1929 get lost sometimes in a huge sea of excellent Minneapolis Moline products. Nice video!
11:12 Oh... that's a nice tractor. Which is hard to say, because everything shown so far was nice and i'm sure all that will follow are also gonna be nice. Man... if i wasn't stuck with work... kind of jealous, not gonna lie.
At least i get to see the pre-show. :) Thanks Squatch!
Thank your for these videos!
One of your best.
I wish I could have seen that show in person! Hopefully next year!
Looks like a fantastic show with awesome displays! Wish there were more of these out west here. Truly is still history in the making to see so many prototypes in the same place. Always makes me happy to see folks enjoy them and care for them. 👍
You need to add on to your living room with a big glass window area to show off that beautiful finished MM proto, instead of that steel shed.
Thanks for taking us along.
Very nice Toby thank you for everything you do for the antique tractors.
I wish I could give it two thumbs up!! I love listening to you talk about machines with the passion and knowledge you have! I only wish I could go to these shows but since I cannot it is great to see your videos! Thank you 😊
All those classic tractors in one place 😊
Thanks for sharing Squatch!! Some very nice MM's
Toby, what a fantastic video! Thanks so much for sharing. I respect people like you that go all out to preserve history. Keep doing what you do thanks
very excited to see you start back on the prototype!
If I can ever make it back, you'll have 2 from Oregon.. I'm probably due a visit, have not been back to 'ol Minn since we left in 1968.
That prototype MM dozer is gorgeous! Now I want one.
Awesome stuff! Thanks for the walk around,i particularly liked the occasional comments on styling.They had some sweet designs back then
Great vidio & show I've got the fever also and I'm from Oregon also good stuff cheers 😊
Thanks for doing these walk arounds. We don't see many of these brands here in New England
Sweet mate think its called luv
Looks like alot of fun!👍👍
Thanks for the video.
Thanks for sharing this with us.
Thanks for the walk around. I have a 1951 R. To get rid of. Engine locked up.
Very Very nice. Thank you
I remember the lake street plant and all the tractors parked outside there was neighbor when I was growing up worked at the Hopkins MN plant and offices
Amazing amount of information that you shared with us about the tractor's at that show! 👍 Thank You
Great video. Lot of work goes into tractors and events. Thankfully there are people like you that want to do it. 👍🏻
Great video. As some else said in the comments it's great have people like you preserve tractor history. Moline tractors has always been one of my favorites then case then international. We had a case on the farm when I was young. Thanks for a great video.
14:00 possibly because at the time, casting was still cheaper than stamping? After all, for casting, you just need to use what was existing to that point, for stamping, you'd need a big press (or the time on it) and custom made press stamps, because with that shape, i'd expect at least 4 stages to obtain the part (cut > preliminary shape > finite > trim). Dunno, just guessing.
Sidenote: you know something's old when they use EX instead of X. I've always wondered what prompted the drop of the E...
I hope you can bring out your M-M and more recent restored D2 for a fall-foliage beauty video. Loved the video you did with M-M last year.
Always good to “see” Kyle Christ!
😂
It's like Wilson from Home Improvement
Very interesting 😊😊😊😊👍👍👍
Thank you for this history lesson. Supper content.
This was so bitchin', Toby! Boy, I would have been like a kid in a candy store if I would have been at that show. Thank you so much for the video! 💕
looks like a great show ,some cool stuff there thanks for sharing ,,,,love that brick.
Your pop up rain came with a thunderstorm worning the timming 😂
The problem with the g 706 m m is it takes 40 acres to turn it around.
You’re not wrong. 😅
Very neat gathering of prototypes, would have been a great show to be at. Like you said, it is a lot of work, and a lot of people don't realize how much effort goes into bringing a tractor to a show. Let alone the restoration and maintenance of the machine. Thank you for doing what you do, without people like you shows would not be worth going to. When you get X231 done and ready to bring it to a show, I'll have to make a point to be there for it.
Great video. You got me all misty at the end.
I have an MM R100 shedded now hope to rehab it and fix it up some day
That is really neat to see so many one of a kind tractors in one place. Just the story's and history they tell.
Really Cool stuff right there, I really enjoyed this one. Here is a bit of MM trivia for Ya. When I was a kid, we had a neighbor that had a MM married to a Farmall M or maybe a MD. IM not sure now,but he farmed a lot of ground, with it. Thanks again for Sharing 😊
Back in the late 70's through to the early 90's I exhibited an number of stationary engines at country and steam fayres herein the UK. It was customary to be given an exhibitors plaque or horse brass, and I've kept all mine. I was looking at them not long ago and it brings back memories of the shows. A lot of the guys involved back then were getting quite old and I guess not with us any longer so to me its about memories and keeping the past alive, not just in static museums. Here now health and safety is limiting a lot of these shows and also many annual ones no longer run because of this, so do all you can to keep it going.
It has been said " Those who dare, win". Anyone can sit and watch, but you Toby and Angry Dan and all of the other exhibitors, and yes even Kyle have driven need to follow these things down to the last degree. Your good efforts have garnered now, two bits of "Unobtanium". The center support rollers for "Swamp Angel", and now a verifiably rare 1 of 50 smoke stack bricks from the MM foundry. Didn't they build that first, before the rest of the foundry? What a well regarded man you are, Toby. Congrats, please continue to put out videos like this for those of us who get your point. Thanks
Good or Bad it is American History, thanx for sharing.😃
I am going to the Albert City Threashermen and Collectors show this weekend by Albert City Iowa. This year i believe they are spotlighting Allis Chalmers. Gathering of the orange, this year marks the 70th year of the WD-45 and the 50th year for the 7000 series.