Great video. There is nothing like seeing embroidery equipment in use to fully understand the possibilities. I like this idea too for its portability compared to slate frames and stretcher bars. Thank you so much.
Another great video. Another use of these stands that I have been told about is to clamp the bit that goes under your leg to a table. Then it is higher for people like me who have really poor eyesight and a neck that gets very stiff. I agree, that they are a great tool.
That's a good suggestion, Jann. After doing the video, I thought about students of mine who have stood at the table using them, which allows them to keep stitching, without sitting (useful for some sore backs).
Thank your for the video. I have one of these that clamp on a table. I wonder if one could buy the sit on bit separately? Hmmm. Time for some Googling. Loved seeing some of your needlework books in the background.
I have what appears to be a twin to yours, except mine is Hardwicke Manor (I’m in U.S., so maybe it’s just a different name and not a different hoop?). It is my favorite hoop as well, although I have recently become fond of the Morgan lapstand combination hoops that go up to a generous 14” diameter.
Yes, I believe, though am not sure, that Hardwicke Manor are the same. I prefer a small hoop than a big one. I have an 11inch hoop, but rarely use it. I like small because I can get my hands around it easier, especially when I need to pinch and pull to tighten stitches.
Very nice hoop Yvette. The threaded insert on the bottom was a good idea to allow it to lay flat on a surface. I already have a few different types of hoops and stand combinations that I’ve amassed over a number of years. Over the years I seem to use them less and less though and seem to stitch in hand more often than not. What types of stitching do you tend to use yours for?
I love my K&G hoop and stand, and the good thing is that the hoops can be used with the Elbesee barrel clamps as well. Never thought of using a metal ruler - my flat-head screw driver damaged the screw head because it was a whisker too big. Maybe a ruler would work better.
That's good to know. On the whole, I don't like the Elbesee stands and hoops as they have the bump on the bottom of the stand and plastic fixings. However, from memory the barrel clamps seemed ok. (Haven't seen one in a while!)
Hi Marilyn, yes, it does. BUT, and it's a big but, I've never found this to be a problem. Even with very thick stitches, such as padded satin stitch with two layers of padding, or french knots with up to 8 wraps, or bullion knots, they revive and refresh, and look just fine. A little steam from the iron, or a spritz of water (provided they are colourfast threads) and I've never had any problem at all. And I've been doing this for a very long time. 😀
The bookshelves behind you suggest that you were in a library, perhaps your family collection; however, the new background has led me to ask whether a future Floss Tube subject might be a review of your personal collection of stitching literature, or a selection of books that you would recommend to your fellow stitchers.
Hmm... I'm quite hesitant to show exactly what's in my library. Too many cats let out of bags for possible future books. I was extremely careful which ones I let you see in the background! But I could review some of them - good idea! And as for books I'd recommend, anything written by me! 😜
Hi Julie, I only tape one ring, and it is for the purposes of grip, not protection against staining. I've never come across wood stains from hoops on fabric. Maybe if you were to leave it there forever, it *might* stain? However, good practice is to take your work out of the hoop at the end of each stitching session. If you're using a poor quality hoop, perhaps it might stain, but again, I have never heard of this happening. If you tape both rings, you're making the space between the rings significantly smaller. If your stitching is bulky (which, for me, Mountmellick embroidery can be) then having both rings bound means that it can be hard to move the embroidery around in the hoop and still have enough screw and thread to be able to do it up. I find one bound ring is quite enough.
So crazy, i never thought to try mine the wrong way round and flip it up. Thanks for the inspiration 🎉
Great video. There is nothing like seeing embroidery equipment in use to fully understand the possibilities. I like this idea too for its portability compared to slate frames and stretcher bars. Thank you so much.
Thanks for suggesting I do this, Kate! 😀
I’m thinking of buying a hoop and has really wonderful quality. Thanks for the great review!
Thanks for sharing the info about this hoop. And thanks for demonstrating how you use it. That’s very helpful.
Glad it was helpful, Linda!
I was researching the best hoops just last week. I think this is the one. Well timed. Thank you !
I certainly love mine!
Another great video. Another use of these stands that I have been told about is to clamp the bit that goes under your leg to a table. Then it is higher for people like me who have really poor eyesight and a neck that gets very stiff. I agree, that they are a great tool.
That's a good suggestion, Jann. After doing the video, I thought about students of mine who have stood at the table using them, which allows them to keep stitching, without sitting (useful for some sore backs).
Great explanation!,love to see how others stitch!
Glad it was helpful!
So appreciate your detailed information. Thank you.
Glad it was helpful, Susan!
Thank your for the video. I have one of these that clamp on a table. I wonder if one could buy the sit on bit separately? Hmmm. Time for some Googling. Loved seeing some of your needlework books in the background.
Yes, you can, because you can buy the hoops separately so that you can have more than one hoop with your stand.
Thanks Yvette for your great explanation on hoops. Very informative. Thank you
My pleasure, Dawn.
I have what appears to be a twin to yours, except mine is Hardwicke Manor (I’m in U.S., so maybe it’s just a different name and not a different hoop?). It is my favorite hoop as well, although I have recently become fond of the Morgan lapstand combination hoops that go up to a generous 14” diameter.
Yes, I believe, though am not sure, that Hardwicke Manor are the same.
I prefer a small hoop than a big one. I have an 11inch hoop, but rarely use it. I like small because I can get my hands around it easier, especially when I need to pinch and pull to tighten stitches.
I’ve wanted one of these but I was afraid of investing in the wrong one, for this reason I really appreciate your review
Glad to help!
No idea how I did not find you before since I love love hardanger
Thanks for sharing about this hoop and stand.
My pleasure, Beth.
Very nice hoop Yvette. The threaded insert on the bottom was a good idea to allow it to lay flat on a surface. I already have a few different types of hoops and stand combinations that I’ve amassed over a number of years. Over the years I seem to use them less and less though and seem to stitch in hand more often than not. What types of stitching do you tend to use yours for?
I use my hoop for everything except Hardanger and Sardinian knotted embroidery. Everything else!
I love my K&G hoop and stand, and the good thing is that the hoops can be used with the Elbesee barrel clamps as well. Never thought of using a metal ruler - my flat-head screw driver damaged the screw head because it was a whisker too big. Maybe a ruler would work better.
That's good to know. On the whole, I don't like the Elbesee stands and hoops as they have the bump on the bottom of the stand and plastic fixings. However, from memory the barrel clamps seemed ok. (Haven't seen one in a while!)
Do you find that a hoop crushes stitches when placed over stitches already completed?
Hi Marilyn, yes, it does. BUT, and it's a big but, I've never found this to be a problem. Even with very thick stitches, such as padded satin stitch with two layers of padding, or french knots with up to 8 wraps, or bullion knots, they revive and refresh, and look just fine. A little steam from the iron, or a spritz of water (provided they are colourfast threads) and I've never had any problem at all. And I've been doing this for a very long time. 😀
The bookshelves behind you suggest that you were in a library, perhaps your family collection; however, the new background has led me to ask whether a future Floss Tube subject might be a review of your personal collection of stitching literature, or a selection of books that you would recommend to your fellow stitchers.
Hmm... I'm quite hesitant to show exactly what's in my library. Too many cats let out of bags for possible future books. I was extremely careful which ones I let you see in the background! But I could review some of them - good idea!
And as for books I'd recommend, anything written by me! 😜
Klass has the same setup but with a clamp to hold hoops of their brand or other brands. Do you recommend that model, too?
I haven't used one with the clamp mouth. I would be concerned that it would be wobbly?
I have the same thing but a different brand (US), and I love it. Highly recommend!
Can I ask which brand yours is? Is it Hardwicke Manor?
Yvette Stanton yes it is. I wasn’t sure if I should mention the brand. They are made EXACTLY the same!
You don't tape both rings?
I was told if you didn't cover both rings the wood could stain?
Hi Julie, I only tape one ring, and it is for the purposes of grip, not protection against staining. I've never come across wood stains from hoops on fabric. Maybe if you were to leave it there forever, it *might* stain? However, good practice is to take your work out of the hoop at the end of each stitching session. If you're using a poor quality hoop, perhaps it might stain, but again, I have never heard of this happening.
If you tape both rings, you're making the space between the rings significantly smaller. If your stitching is bulky (which, for me, Mountmellick embroidery can be) then having both rings bound means that it can be hard to move the embroidery around in the hoop and still have enough screw and thread to be able to do it up. I find one bound ring is quite enough.
How long will shipping be to US at this time of year?
Australia Post website says about 6-10 business days, but I would take that as a guide only. If it gets stuck in customs, then it could be longer.
@@yvettestanton Thank you, much for replying.