Thanks for being honest and explaining why you think it does not work. I am looking all over for a workable design. I have seen the Yildiz motor run for hours and need to find out more of that design before I start turning material. This has become one of my bucket list items and I don't want to quit on it. When I find a workable design, I will share it with every one
hola Jim hace algun tiempo que estoy estudiando este asunto . . . estoy por armar un prototipo lo hare en un principio con madera voy a copiar el de Perendev . . .se me ocuriio la idea de agregarle un pequeño volante que pienso ayudara a mantener la energia de movimiento . . . pero solo estoy experimentando
I built that I have the wiring diagrams, it does not work, if you look good when he dismounts it, there are electro magnets powered by a hidden battery.
GOD BLESS YOU. You are a real human. I don't know you but I am proud of you. We need more people like you on earth hence the life would have been different than now.
Muammer Yildiz's motor (turkish designer) uses a kind of white plastic. Maybe that material prevents dispersion and it channels magnetism. They are selling a generator with that tecnology at US$15.000 + taxes and shipping, for 25A at 220Vac. Price for 2015.
No, Yildiz only _pretends_ to sell motors, he doesn't actually sell them. The Yildiz motor is a scam, probably done with a hidden battery and an e-motor. Yildiz has always refused to submit his machine to a credible test. Although he has a patent, so secrecy about the construction can't be the reason. All magnet-motors are scams. It is not possible to drive a motor with permanent magnets alone.
Sold out apparently otherwise I would have bought one, then reverse engineered it and sold the design for $100. everyone would be happy apart from the men in black hired by the Oil Giants.
Glad you tell the truth. This was my original invention... which was stolen from my shop many years ago... then a few months later showed up on RUclips. Then all over RUclips. It was never intended to go online. But some people just couldn't resist to steal my ideas. I'm glad you did this to show people that just because you have an idea, doesn't mean it will work. Especially with magnets. The problem with RUclips is that people want to Monetize their web pages... so they put up crap on their site and fake it. Which is wrong. I am happy you told the truth in this instance. I am vindicated finally... because I never intended that my ideas be exploited like it has been by stupid people and fools who just want to make a buck.
So if I understand him correctly, all he must do is better isolate the ‘waste’ magnetic field around all the magnets to stop interference. An observation I made also is in the question: how does he get the rotor to advance?...it looks like all the magnets are in alignment on the ‘rotor’..wouldn’t it be prudent to have a few degree variance to advance some of the individual magnet runs? Unless of course that has been accomplished on the ‘field’ side magnets. I can see this working to some degree if he can achieve at least those couple things. Although it may turn, the power output may be minimal. I hope I’m wrong on that. You have come so far...keep going...take a break and come back to it. 👍👍
Maybe you shoud put the magnets in a half part off the wheel and the other half, you can use as an aceleretor by gravity, a boddy to give velocity again!!! Good work! Bellive your self, and don't give up! Zea gut! Pedro from Brazil! Write me back if you can!
You need to use aluminum not wood, aluminum cancels 50% to 70% the magnetism around the magnet inside the aluminum, only the exposed surface of the magnet is going to push the other magnet
Dear you do not be disappointed. In your project there is some kamine which require little fine tuning. I am also trying this project. The placement of magnets is to be changed. It requires principle of Halbach Array in which the magnets are to be placed at 0 to 90° then next to be put at 90 to 180° and next magnet to be placed at 180° to 270° and so on in the same fashion in next row. If you want to be successful you may write to me. Thank you for sharing. Do not be lose hearted, God will help you. I observe that your magnets are placed deep enough. So try to arrange in Halbach Array.
thanks for your work !!! - you need a potmagnet to eliminate the magntic flux -- here an idea i got dont belive me just try it take a (in german - "hutmutter m20" or so) put you magmet inside and you will discover your mags only have flux to one side lets say 90% to 10% on the other side maybe you have seen such mags in a radio sometimes they are in a pot, in the end you need someone to turn you pots for all of your mags and drill bigger holes in your wooden motor.
A great experience, but the oil companies do not accept the production of generators without power for Inhm you lose, but at the end relieved of their power to prevent this energy is free and produces free generators.
everything must be in order to work. main mistake i think was almost no gap between the stator and the rotor, thats why there is some damage on rotor. other mistake was that the stator and rotor wasn't built as one piece but got seperate mountings
I like ur honesty. Great design too. It will work. Just got to figure out where to put the magnets. Timing. Like a car motor. Maybe spiral staircase them. Like a drill. Also springs. I would like to help. I can see it in my head.
Thank you for the explanation, Daly. I finished watching your video and appreciate the quality of work. You are the first person that understands the problem. Before I make any comments, please let me know if you still got Your project?
you need to have positive and negative rotors and if you have a coil between these rotors to generate power it might just work the gap between the magnets is very important this is something i had in mind since the eighty,s
Magnet motors do work, but you just have to know how to shield off the contra forces of the magnets. Also you can use magnets in combination with coils and electronically eliminate the contra emf.
So that your magnets do not cancel their effects, you should have positioned it at a 45-degree angle on the rotor or with a different distance so that when they turn, it seems to see an arrow (positioned in wide then narrowing) ..
thank you for trying and thank you for the honest opinion just out of curiosity have you tried staggering the stator magnets like the rotor magnets are?
you all prolly dont give a shit but does someone know a way to log back into an instagram account?? I was stupid forgot the login password. I would appreciate any assistance you can give me.
You should put the magnets inside the feromagnetic jackets before you install all the magnets to rotor and stator,to get one way/focusing direction of magnetic flux
sir.......can we use steel.....that will not eliminate the magnetic feild...but it will shut the magnetic field and change the route of the force..that made it vibrate
it could work if you place a little heavy cycle. so wight is necessary to impulse motion of the rotation. Simple . try throwing a paper and a stone, which one will go far.
outside draw a linear stairway magnetic & use only one magnet inside (rotor)& draw a star with 5 magnets (1 each stair) use springs to calibrate the jump presure in jumps each ("1hz") circle complet ... there u have a magnet generator
You would have shield the magnets to direct the field to the right flow. Also the angulation between your rotors and stators, it seems, are not 'closing a cycle'. You need the last rotor to have same angular distance from the first one so the sistem will be in equilibrium.
Great work, just about there. all you need are some coils that are magnets that can be turned on and off, offset from the permanent magnets with minimum power input using transistors to intensify the power to them and it will work. Check out John Bedini Motors and you will see.
There is kind of metal used with this motor to prevent magnetic field from spreading, it shield it and keep it in one direction, you need to search for it bro
The magnets on both stator and rotor are too close. Separate them more so that on the stator you can place a strip of iron (i) (ferrous material) and a space(/) after the magnet(m). The iron will attract the magnet on the rotor, when the rotor magnet reaches the magnet on the stator it is repulsed: /-i-m-/-i-m-/ and so on. This keeps the imbalance because the attraction to the iron is less than the repulsion from the magnet.
Maybe yes, Maybe not. There is a question of angle, size of magnets. (For me the magnets are too thin) and something missing around magnets. The idea is excellent. I would have known the angle used to drill to control
Hello, you must have glue 2 magnets in the same palarity, after that put a shaft in between like 2 coins with a shaft in between. other wise it wont work. please keept trying. Nice video. Congratulations.
Thanks for your effort, me too I was trying the same magnet motor project, but not using woods materials, I used jut magnet and swedish bearing. Thanks fir intersting design
The problem is this: The repelling power of one pole of the magnet is eliminating by attraction of an opposite pole! you have to use electromagnets on the stator to make them change the polarity due to Fuko current and chase each other. If you watch the video called ' Magnet motor for Argentina.' , you will see working model. Thanks! Your effort is NOT in vain!
For what I noticed, the space between the stator and rotor is too close. then how did you place the magnets polarity? N/S, like all in stator are S and all in rotor are N?
Hi, can you,please, give me more information about the angles of the wholes, and some blue prints? I will really appreciate~Only for personal use, of course.
he has several issues going wrong here. do NOT use wood, magnets are placed wrong, when he spins it , it slows down fast because of drag due to rust buildup in beirings 6:40, 7:19 when he closes it , it hits and rubs on inner cylinder. 6:50 at end he says it could not work. is he referring to his project or all other magnet motor projects?
It won't work because both are on a strain line. Magnets on the shafts can be straight, but the other magnets on the enclosure needs to be at an angle.
Where's your design? you've obviously made one to come to your conclusion. We all want to have one because we are being ripped off big time. Let us know where your website is.
Very good, idea but please your give me ,when to the build part per part until the end ....This is today for the world very very urgent for Electrical Enviromental friendly... Thank you
If you work with "the most powerful magnets" please dont let them attract each other freely like that unless you wear safety goggles. Ive crushed many against each other causing parts to fly across the room.
At first I thought this was just going to be another bullshit scam free energy video, but I'm glad to see he has an education and knows it will not work. Good on you for taking your time, testing it out, and discovering for yourself that these stuff do not work man!
Hey, Mike. Yes, this particular design doesn't work but another design with a different arrangement might work. Every design needs to be tested in order to see if it will work.
Mike Grown: Non of them will work, try all you like... None will work, Mike? You know this because you're omniscient, right? In order for your claim to be true, every possible design would have to be tested in every possible environment to confirm your claim that none will work. Unfortunately, there are an infinite number of test cases and thus it's impossible to test them all. This means it's impossible to prove that none will work. On the other hand, proving it could work is possible if a single working example could be demonstrated. The same can be said of the various laws and theories in science, particularly in physics. No one can prove any law or theory to be true. However, it's possible to prove a particular law or theory is false by demonstrating a single example called a counterexample. When a law or theory is shown to be false, it's scrapped and a new one takes its place that accounts for the observed phenomena. Replacing old laws and theories with new ones has been done before, and it will continue to be done well into the future as our knowledge and understanding of nature, and of the universe, continues to grow.
This work if you do 2 things, add a fly wheel and block the magnetic field around it with meumetal sheet and bingo it will work like a champ. Mine is working fine.
first 3 seconds, I'm thinking "Why is there a beautiful tablecloth covering the table and concealing the underside? Edit: At the end I'm thinking "Nice tablecloth."
Perhaps if you stay at it long enough, it will turn out to be possible. You could prove the establishment wrong, or at least show that there is more too it than they realize! I built an ion propelled aircraft that carries its power supply,( It can be seen on my channel.) Most people thought it wasn't possible to get enough lift with just ions. My craft is completely independently verified. I wish great luck for you! I did read a paper once that said different polarity ions build up around the polls of very strong magnets. It might be possible to get a faint amount of imbalanced thrust that way, I don't know. Thank you!
Hi sorry i'm late to this Video But I have the Patton to the Perendev Magnet Motor and it Calls for Magnetic Shielding Like Graphite or Stainless Steel if u haven't trashed the unit u might want to try them
to set the spacing, angle and timing in fixed and not variable manner is not the best way to experiment on this, there are maybe 1000's of combinations that need to be explored with the mounting holes of the magnet & spacing of the magnets & angle of rotor offsets.
-.- the outside needs to be coils put magnets olny in the middle each faceing the opisate way to the other, wire the coils to a light or batery and use it to power a motor witch spins the middle, you can get out more power than it will take to power the motor - witch spins the magnets - genorateing power in the coils - powering a batery - powering the motor... :P
No I think the guy is right you should probably use a loan with them hollow out the shaft part of the wheel I replace it with aluminum you minimize your resistance created by it because technically it will be behind the manual take the outer shell replace the natural magnets with man-made magnets of copper and iron control the output that way it's easier to direct you're not going to make it so that it turns itself on that might not even be possible but you can make it to power a generator which intern will rotated and with a little more tinkering you could probably control the maximum output of energy that you generate this is actually pretty good
And if you read this replace your bearings with magnets and opposite polarities on both ends of the weel right now you have low resistance of kinetic energy but by doing that with the magnets you create 0.00000 resistance i would ur a hollowed out magnet wheel and take smaller magnets embed them a long rod on the outside all putting in the same direction which would be the opposite polarity of the whole in the magnet slide them over top so that then never make contact
FIRST YOU NEED BAR MAGNETS and you need to put magnetic shielding( iron, mu-metal) on one half of each pole so it can move in only one direction, magnets have to be close enough to each other
go to any of the physics practical products suppliers in you city or magnet suppliers in your city or any of the Metro City around. Ask for Neodymium Magnets. Search through google about suppliers in your area.
@@bene88597 working but not for sale. Someone say he sell one for half of millions $$$ 1 unit)) "infinity isav" have a look. You need like preorder and pay 10k€: 5k for travel to Seoul Korea for 4 nights to see unit yourself (all inclusive) and 5k for preorder. But they didn't say to you when it's ready for you to collect... but it can be a scam... if China gonna have 1 unit, they will make millions for very low price... How I understand he want have proper investors to win something in this game..
Thanks for being honest and explaining why you think it does not work. I am looking all over for a workable design. I have seen the Yildiz motor run for hours and need to find out more of that design before I start turning material. This has become one of my bucket list items and I don't want to quit on it. When I find a workable design, I will share it with every one
hola Jim hace algun tiempo que estoy estudiando este asunto . . . estoy por armar un prototipo lo hare en un principio con madera voy a copiar el de Perendev . . .se me ocuriio la idea de agregarle un pequeño volante que pienso ayudara a mantener la energia de movimiento . . . pero solo estoy experimentando
did you make abreak through?
I built that I have the wiring diagrams, it does not work, if you look good when he dismounts it, there are electro magnets powered by a hidden battery.
GOD BLESS YOU. You are a real human. I don't know you but I am proud of you. We need more people like you on earth hence the life would have been different than now.
Thank you for being honest, not scamming, speaking your mind, building something excellent looking, and for all your efforts. God bless!
ruclips.net/video/P29SDY560uc/видео.html could you plz watch and comment
Looking at it I can't imagine how many hours you spent assembling and disassembling repeatedly just to show people how it's done my respect, sir!
Thank you, some people like to scam others but you speak truth, and I thank you.
Try to use big magnates for Starter and fit the rooter magnates little deeper. Don't give up. You are near to success. May God helps you.....
Muammer Yildiz's motor (turkish designer) uses a kind of white plastic. Maybe that material prevents dispersion and it channels magnetism. They are selling a generator with that tecnology at US$15.000 + taxes and shipping, for 25A at 220Vac. Price for 2015.
No, Yildiz only _pretends_ to sell motors, he doesn't actually sell them. The Yildiz motor is a scam, probably done with a hidden battery and an e-motor. Yildiz has always refused to submit his machine to a credible test. Although he has a patent, so secrecy about the construction can't be the reason. All magnet-motors are scams. It is not possible to drive a motor with permanent magnets alone.
and why exactly is that
Sold out apparently otherwise I would have bought one, then reverse engineered it and sold the design for $100. everyone would be happy apart from the men in black hired by the Oil Giants.
Don't throw it out. Even if it doesn't work, it's still a work of art.
Glad you tell the truth. This was my original invention... which was stolen from my shop many years ago... then a few months later showed up on RUclips. Then all over RUclips. It was never intended to go online. But some people just couldn't resist to steal my ideas. I'm glad you did this to show people that just because you have an idea, doesn't mean it will work. Especially with magnets. The problem with RUclips is that people want to Monetize their web pages... so they put up crap on their site and fake it. Which is wrong. I am happy you told the truth in this instance. I am vindicated finally... because I never intended that my ideas be exploited like it has been by stupid people and fools who just want to make a buck.
You are a good man.!! Keep working your ideas!! John Markidis from Greece.
So if I understand him correctly, all he must do is better isolate the ‘waste’ magnetic field around all the magnets to stop interference. An observation I made also is in the question: how does he get the rotor to advance?...it looks like all the magnets are in alignment on the ‘rotor’..wouldn’t it be prudent to have a few degree variance to advance some of the individual magnet runs? Unless of course that has been accomplished on the ‘field’ side magnets. I can see this working to some degree if he can achieve at least those couple things. Although it may turn, the power output may be minimal. I hope I’m wrong on that. You have come so far...keep going...take a break and come back to it. 👍👍
Maybe you shoud put the magnets in a half part off the wheel and the other half, you can use as an aceleretor by gravity, a boddy to give velocity again!!! Good work! Bellive your self, and don't give up! Zea gut! Pedro from Brazil! Write me back if you can!
You need to use aluminum not wood, aluminum cancels 50% to 70% the magnetism around the magnet inside the aluminum, only the exposed surface of the magnet is going to push the other magnet
Aluminum creates drag because of magnetic eddy currents. Not wise in this kind of build
Correct!
Hello what is then the material that is needed in dehor of the boi is aluminum
Yes, aluminum and if you can put the magnet in a copper ring and then the magnet with the copper ring installed in the aluminum discs
Oducip
Dear you do not be disappointed. In your project there is some kamine which require little fine tuning. I am also trying this project. The placement of magnets is to be changed. It requires principle of Halbach Array in which the magnets are to be placed at 0 to 90° then next to be put at 90 to 180° and next magnet to be placed at 180° to 270° and so on in the same fashion in next row. If you want to be successful you may write to me. Thank you for sharing. Do not be lose hearted, God will help you.
I observe that your magnets are placed deep enough. So try to arrange in Halbach Array.
thanks for your work !!! - you need a potmagnet to eliminate the magntic flux -- here an idea i got dont belive me just try it take a (in german - "hutmutter m20" or so) put you magmet inside and you will discover your mags only have flux to one side lets say 90% to 10% on the other side maybe you have seen such mags in a radio sometimes they are in a pot, in the end you need someone to turn you pots for all of your mags and drill bigger holes in your wooden motor.
its an amazing build credit where its due and full well deserved thankyou
Thanks. You put a lot of work into that. I'm sorry it did not work but you are very truthful!!
Don't give up. The idea seems feasible. There must be a way to make this work.
Energy always has an origin. People have to stop believing that there is such a thing as a free lunch.
A great experience, but the oil companies do not accept the production of generators without power for Inhm you lose, but at the end relieved of their power to prevent this energy is free and produces free generators.
everything must be in order to work. main mistake i think was almost no gap between the stator and the rotor, thats why there is some damage on rotor. other mistake was that the stator and rotor wasn't built as one piece but got seperate mountings
I like ur honesty. Great design too. It will work. Just got to figure out where to put the magnets. Timing. Like a car motor. Maybe spiral staircase them. Like a drill. Also springs. I would like to help. I can see it in my head.
👍
Thank you for the explanation, Daly.
I finished watching your video and appreciate the quality of work.
You are the first person that understands the problem.
Before I make any comments, please let me know if you still got
Your project?
It failed
you need to have positive and negative rotors and if you have a coil between these rotors to generate power it might just work the gap between the magnets is very important this is something i had in mind since the eighty,s
A magnetem going through a coil generates electricity.. can't we make the belt of magnets move in one direction? That too through coil?
Magnet motors do work, but you just have to know how to shield off the contra forces of the magnets.
Also you can use magnets in combination with coils and electronically eliminate the contra emf.
use brass and copper mixture for that material but it will be heavy and expensive cooper can reduse magnet power in other directions
So that your magnets do not cancel their effects, you should have positioned it at a 45-degree angle on the rotor or with a different distance so that when they turn, it seems to see an arrow (positioned in wide then narrowing) ..
thank you for trying and thank you for the honest opinion just out of curiosity have you tried staggering the stator magnets like the rotor magnets are?
Try fishing magnets, they are powerful on one side. They make them in small sizes about 1” OD.
you all prolly dont give a shit but does someone know a way to log back into an instagram account??
I was stupid forgot the login password. I would appreciate any assistance you can give me.
@Juelz Finley Instablaster =)
Thanks Sir. May be it will be improved soon to a fully functioned magnet motor.
You should put the magnets inside the feromagnetic jackets before you install all the magnets to rotor and stator,to get one way/focusing direction of magnetic flux
this is good concept motor,low heat absorbtion ,and low static propertys,as many other fabricaters/builders use plastic or metals..
great work i was interested in this magnet motor i hope
this motor will published soon to public
your honesty is charming. thanks
Thank you for being honest.
Translation: I have wasted 10 years of my life
The issue isn't the magnets, I's you're set up.
Degree of angle on both sides! Don't leave any spaces on the push that surrounds the cylinder.
sir.......can we use steel.....that will not eliminate the magnetic feild...but it will shut the magnetic field and change the route of the force..that made it vibrate
it could work if you place a little heavy cycle. so wight is necessary to impulse motion of the rotation. Simple . try throwing a paper and a stone, which one will go far.
outside draw a linear stairway magnetic & use only one magnet inside (rotor)& draw a star with 5 magnets (1 each stair) use springs to calibrate the jump presure in jumps each ("1hz") circle complet ... there u have a magnet generator
You would have shield the magnets to direct the field to the right flow. Also the angulation between your rotors and stators, it seems, are not 'closing a cycle'. You need the last rotor to have same angular distance from the first one so the sistem will be in equilibrium.
Great work, just about there. all you need are some coils that are magnets that can be turned on and off, offset from the permanent magnets with minimum power input using transistors to intensify the power to them and it will work. Check out John Bedini Motors and you will see.
There is kind of metal used with this motor to prevent magnetic field from spreading, it shield it and keep it in one direction, you need to search for it bro
The magnets on both stator and rotor are too close. Separate them more so that on the stator you can place a strip of iron (i) (ferrous material) and a space(/) after the magnet(m). The iron will attract the magnet on the rotor, when the rotor magnet reaches the magnet on the stator it is repulsed: /-i-m-/-i-m-/ and so on. This keeps the imbalance because the attraction to the iron is less than the repulsion from the magnet.
Has any such design worked for you?
Maybe yes, Maybe not. There is a question of angle, size of magnets. (For me the magnets are too thin) and something missing around magnets.
The idea is excellent.
I would have known the angle used to drill to control
Hello, you must have glue 2 magnets in the same palarity, after that put a shaft in between like 2 coins with a shaft in between. other wise it wont work. please keept trying. Nice video. Congratulations.
what does your idea mean?
@@gauravashq no reply.??😳should we say rip or anotjer scammer kid with dumb useless ideas..😀
If you put the magnet in the coupre case, I think the problem will be slove... But I don't know....
thanks a lot for saving our
time and sharing your experience
Do it active?
Thanks for your effort, me too I was trying the same magnet motor project, but not using woods materials, I used jut magnet and swedish bearing. Thanks fir intersting design
Asra NAIMI very good best of luck
i think it might work if you put some distance between the magnets, looks like they are too close
The problem is this: The repelling power of one pole of the magnet is eliminating by attraction of an opposite pole! you have to use electromagnets on the stator to make them change the polarity due to Fuko current and chase each other. If you watch the video called ' Magnet motor for Argentina.' , you will see working model. Thanks! Your effort is NOT in vain!
What are you talking about is called magnetic shield and the magnets must be placed in specific angle. One without other will not work.
excelente herr Truman, muchas gracias por compartir su conocimiento.
Thanks for saving people money,💪👏👍🇷🇸
So how they doing maganting motor to work I think problem is wood and metals ok you can try one more time with metal and thanks for share
kindly explain that what do you use metal on surface. hole demo
Have you considered replacing the wood with bizmuth ?
For what I noticed, the space between the stator and rotor is too close. then how did you place the magnets polarity? N/S, like all in stator are S and all in rotor are N?
Hi, can you,please, give me more information about the angles of the wholes, and some blue prints? I will really appreciate~Only for personal use, of course.
Tesla said its 35 or 37.5 (i forgot). You may try though.
Couldn't you sleeve the magnets in bismuth or bismuth and copper. I would think that would focus the fields
Have you tried to Shield one end of the magnet to block the field from interfearing with the others?
he has several issues going wrong here. do NOT use wood, magnets are placed wrong, when he spins it , it slows down fast because of drag due to rust buildup in beirings 6:40, 7:19 when he closes it , it hits and rubs on inner cylinder. 6:50 at end he says it could not work. is he referring to his project or all other magnet motor projects?
In your project you will have to take help of flywheel which itself generate torque and allow your project be successful.
It won't work because both are on a strain line. Magnets on the shafts can be straight, but the other magnets on the enclosure needs to be at an angle.
Where's your design? you've obviously made one to come to your conclusion. We all want to have one because we are being ripped off big time. Let us know where your website is.
he he.. don't worry we will succeed...;)
Very good, idea but please your give me ,when to the build part per part until the end ....This is today for the world very very urgent for Electrical Enviromental friendly... Thank you
which magnet are used and how it's power
we can use this motor in farm or in country with no electricity
If you work with "the most powerful magnets" please dont let them attract each other freely like that unless you wear safety goggles. Ive crushed many against each other causing parts to fly across the room.
Thank you for a great video sir!
Hello for rotor your magnets are ok. But for stator you must use magnets North sud on thé sale face. Half, half. And it will bé good...😉
At first I thought this was just going to be another bullshit scam free energy video, but I'm glad to see he has an education and knows it will not work. Good on you for taking your time, testing it out, and discovering for yourself that these stuff do not work man!
Hey, Mike. Yes, this particular design doesn't work but another design with a different arrangement might work. Every design needs to be tested in order to see if it will work.
No, do not bother, until you find the energy source.
Where does the Energy come from?
+you5711 Idiot
+you5711 Non of them will work, try all you like...
Mike Grown: Non of them will work, try all you like...
None will work, Mike? You know this because you're omniscient, right?
In order for your claim to be true, every possible design would have to be tested in every possible environment to confirm your claim that none will work. Unfortunately, there are an infinite number of test cases and thus it's impossible to test them all. This means it's impossible to prove that none will work. On the other hand, proving it could work is possible if a single working example could be demonstrated.
The same can be said of the various laws and theories in science, particularly in physics. No one can prove any law or theory to be true. However, it's possible to prove a particular law or theory is false by demonstrating a single example called a counterexample. When a law or theory is shown to be false, it's scrapped and a new one takes its place that accounts for the observed phenomena. Replacing old laws and theories with new ones has been done before, and it will continue to be done well into the future as our knowledge and understanding of nature, and of the universe, continues to grow.
Mr give answer why you can tune it on lier such as I dian film which put his leg on earth all cars go on sky
This work if you do 2 things, add a fly wheel and block the magnetic field around it with meumetal sheet and bingo it will work like a champ. Mine is working fine.
fly wheel? where? and how to block magnetic field around what?
I want to buy one of yours for how much
Would you sell me this? I'm ready to buy
good work bro... where did you end up buying those magnets????
you just have to make the outside a fraction wider so it dont rub.
first 3 seconds, I'm thinking "Why is there a beautiful tablecloth covering the table and concealing the underside?
Edit: At the end I'm thinking "Nice tablecloth."
Why would he want to conceal anything when he admits 'it doesn't work'
Congratulation, it's a very good job, maybe for help everybody
Perhaps if you stay at it long enough, it will turn out to be possible. You could prove the establishment wrong, or at least show that there is more too it than they realize! I built an ion propelled aircraft that carries its power supply,( It can be seen on my channel.) Most people thought it wasn't possible to get enough lift with just ions. My craft is completely independently verified. I wish great luck for you! I did read a paper once that said different polarity ions build up around the polls of very strong magnets. It might be possible to get a faint amount of imbalanced thrust that way, I don't know.
Thank you!
How would the halbach array work with this application?
Still, Sir, it is a beautiful effort. I truly admire you. pierre from New Mexico
realy ur taking efforts and your mind is open for all not like hild something. great i like your nature
I have the magnet but where will get the other materials
China, or Ebay
am in china
It was 1992 location was in Turkey, Ankara ,a taxi diver did this system and working perfectly, i never fogat this.
ruclips.net/video/P29SDY560uc/видео.html
pleas tell me about magnets pole side you put in roter and in stator magnets pole side
Both poles will be the same to get the 'push' effect, because as you know -you cannot place a + next to a + they will push away from each other.
Hi sorry i'm late to this Video But I have the Patton to the Perendev Magnet Motor and it Calls for Magnetic Shielding Like Graphite or Stainless Steel if u haven't trashed the unit u might want to try them
Does steel work as shielding? what to use as graphite? Do we have sheets of graphite available? I doubt graphene as hit the market yet?
to set the spacing, angle and timing in fixed and not variable manner is not the best way to experiment on this, there are maybe 1000's of combinations that need to be explored with the mounting holes of the magnet & spacing of the magnets & angle of rotor offsets.
-.- the outside needs to be coils put magnets olny in the middle each faceing the opisate way to the other, wire the coils to a light or batery and use it to power a motor witch spins the middle, you can get out more power than it will take to power the motor - witch spins the magnets - genorateing power in the coils - powering a batery - powering the motor... :P
You take help of charger and tell them. They will help you and rectify the problem of shaking.
No I think the guy is right you should probably use a loan with them hollow out the shaft part of the wheel I replace it with aluminum you minimize your resistance created by it because technically it will be behind the manual take the outer shell replace the natural magnets with man-made magnets of copper and iron control the output that way it's easier to direct you're not going to make it so that it turns itself on that might not even be possible but you can make it to power a generator which intern will rotated and with a little more tinkering you could probably control the maximum output of energy that you generate this is actually pretty good
And if you read this replace your bearings with magnets and opposite polarities on both ends of the weel right now you have low resistance of kinetic energy but by doing that with the magnets you create 0.00000 resistance i would ur a hollowed out magnet wheel and take smaller magnets embed them a long rod on the outside all putting in the same direction which would be the opposite polarity of the whole in the magnet slide them over top so that then never make contact
Is this experience successful or not, please reply please
Thank you sir for your research and efforts..
Try changing the magnet position....so they repel each other.... Positive to negative the magnet ... Or negative to negative or positive to positive
you're missing the magnetic shielding around each magnet
I want to know the name of the magnet you useded please...
Try dividing each in its own region using metal shells and also reduce the no. Of magnet per. Disk to reduce the cross magnetic interaction
FIRST YOU NEED BAR MAGNETS and you need to put magnetic shielding( iron, mu-metal) on one half of each pole so it can move in only one direction, magnets have to be close enough to each other
hi
thank you for your presents your project , I need to know more about the magnet , size , imported from where , that all .
go to any of the physics practical products suppliers in you city or magnet suppliers in your city or any of the Metro City around. Ask for Neodymium Magnets. Search through google about suppliers in your area.
Its already have been made by one man. And working 100%
Its working??
@@bene88597 working but not for sale. Someone say he sell one for half of millions $$$ 1 unit)) "infinity isav" have a look. You need like preorder and pay 10k€: 5k for travel to Seoul Korea for 4 nights to see unit yourself (all inclusive) and 5k for preorder. But they didn't say to you when it's ready for you to collect... but it can be a scam... if China gonna have 1 unit, they will make millions for very low price... How I understand he want have proper investors to win something in this game..
@@Alex-c1n2d is it so hard to make one by yourself??
Try.... Put all negative facing out on your cage and put all positive on the wheel facing up....or vice versa
hola como te va soy argentino me puedes pasar los planos de ese motor con lo himanes que usaste para armarlo; te lo voy agradecer
Thank you for your efforts , I ask you to install magnets and operating