Explore a wide variety of content in our carefully curated RUclips playlist: • Binge-Worthy Content Find more amazing tips at @TotallyHandyShorts #shorts
You can also boil water, put it in the freezer and save it for later so you don’t have to boil it again 🤦♂️. Can’t believe channels like this ever get any traction.
@@yeoj_ because it will hold for like a day, either do it the proper way and use a plug or depending on wall you could use small pieces of wood like toothpicks or copper wire to effectively shrink the hole, why this works better then the glue gun is that this stuff is more solid, I could bite through a glue stick to give you a reference how soft it is
A true DIY life hack! Solving a problem that doesn't exist by doing something that takes way more effort and is worse than the correct way. Wall plugs exist for a reason
It’s so crazy that nobody has invented wall anchors yet. They’d be so useful. They’d probably sell them in every hardware store. Just a shame they don’t exist and we have to do this every time
This thing would only work on a dry wall or a wood wall. And i would not put anything important on top of that . The wall plugs open up when the screw Gets in that's why it's solid
Pro tip: This doesn't work. Explanation: That plastic case you put inside the hole isn't just to avoid the screw to SCREW the wall (pun intended, but actually it has a mechanism wich expands once the screw goes in, locking the whole thing in place making it very hard to pull it out if it isnt unscrewed.
You aren't unscrewing a bolt incased in hot glue like it were a mold. Also using the bold while the glue hasn't dried yet would be more effective and simpler.
You could just get a tool to thread wood. Like maybe nail a piece of wood to the wall and thread a hole you drill into it. This just looks awful, after a few days its gonna break especially with a hanger supporting a backpack. Or you could just get screws.
Please for the love of god learn the toothpick trick, if a hole is too big or stripped for a screw stick a toothpick in it so the screw has something to grab onto and the force of the screw will jam the toothpick in place
Top tip: that ain't gunna hold forever
Yeah it basically only had the weight pushing the backside up and the little to no grip it offers
@Magányos Lány you're definitely no Cappuccino Uno my guy
So like every screw ever
Yeah just use a fucking plug
Tip Top 🎀
Whatever you were smoking when you came up with this idea, i want some too
Me too 😂
Welcome to crackhead crafts and tips
Bring some chocolate as well.....
........and some skittles
You can also boil water, put it in the freezer and save it for later so you don’t have to boil it again 🤦♂️. Can’t believe channels like this ever get any traction.
Inhaled too much hot glue vapours
You are basically glueing a screw into the wall…
I usually use duct tape but this seems good too...
@@benedekfodor269 sometimes i also use chewing gum, sticks very good too
But worse cause it’s not even bonded
@@Juri187xx woww... good to know. I alwayz use menstrual pad🙄🙄
@@damianlorvett9942 ayoo, you need jesus😂
My landlord must watch these shorts
Lol god help you
Pro tip: tenants union
You're already paying for that fuckers mortgage
Most accurate comment I have ever seen on any platform.
Dang😂😂😂
Do you live in Portland lol
I love this channel, every time I think it can’t get worse, I find a new video from them
When the hot glue is the first thing you see you just know it’s going to be some bullshit.
Or a glue gun
I don’t see how this is that bad, just use black hot glue and what’s the issue. It may not hold forever but then just add more glue?
@@yeoj_ why not use a proper screw and plug? This is as I said just bs.
@@nameofthegame9664 Jajajaja so true. Hot Clue is shit.
@@yeoj_ because it will hold for like a day, either do it the proper way and use a plug or depending on wall you could use small pieces of wood like toothpicks or copper wire to effectively shrink the hole, why this works better then the glue gun is that this stuff is more solid, I could bite through a glue stick to give you a reference how soft it is
A true DIY life hack!
Solving a problem that doesn't exist by doing something that takes way more effort and is worse than the correct way.
Wall plugs exist for a reason
5 min craps gon be proud to this guy
@@adude6498 5 minute craps?
@@JasonW. yes thanks for correcting it
1
@@adude6498 I will not call 5 minute
crafts anything else but 5 minute craps now
pov : eating hot glue moments before this was filmed
Oh no.....its 5-minute-crafts.....but worse....RUN!
💀
Imagine bearing weight on a hot glue anchor
“If there’s a hole, there’s a- oh wait wrong video”
- Master Oogway
And what was the point of making the mold?
Nothing .
@@user-jc1km1qv1m Like everything in this channel lmao
Proof-of-concept
You can use those little plastic things right?
@@binglol_2345 dirty
250 полуляхов из 250!?
Чел гений хахвхвхвх
300
250 мало
это 500 как минимум
Дюбели в дифиците?
Fact: the bag is empty... and even that is way too heavy
ALL I FEEL IS PAIN
What was that for ?? My brain hurts... I enjoyed though the background music🤣🤣🤣
Damn I just wasted my time watching this 🙄
"ЗДРАСЬТЕ)"
Согласен. Нужно доку скинуть, пусть размажет. Хотя уже неоднократно разрушал спермаклей в пух и прах
Really good idea
Очередная шняга, которая работает только в режиме "презентации".
Это вот он там минут 20 потратил на свои эксперименты с экскрементами, а мог ведь просто дюбель купить 🤷♂️
Fischer plug left the chat
Доктору Дью не показывать!!! Иначе пожар от его пердака спалит новый гараж Матвеева!!!
Он ему ещё Гагарина не простил.
If only they made a product like this you could buy readily at the stores
It’s so crazy that nobody has invented wall anchors yet. They’d be so useful. They’d probably sell them in every hardware store. Just a shame they don’t exist and we have to do this every time
I think my landlord built my house using your channel as guidance
Omg. Someone get this guy a medal.
Top tip: You can glue the original holder bolt itself but it wont hold for long anyway.
Sometimes i use bamboo skewers in place of tox. Works great on concrete. Easy, very affordable, works well, and lasts
that's super cool. now i know how to hang my kitchen shelf.
Крайне качественное и крепкое соединение. Советую тебе на своей машине так крепить колеса.
Pro tip use the same colour as the wall. And don’t put anything heavier on it than your willing to have land on your toe.
So cool , can totally use that!!
Unless you want to do this every morning... don't do that xD
is everyone gonna ignore the wall, its unfinished yet it's so classy
How did you get to hold the shape?
Wouldn't all of the stuff just roll right off?
Also, what did you use in the first place?
Protip: use vegetable oil for extra holding power
For every 0 good comment I see, I see about an infinite amount of bad ones criticizing the video
??? I am confuse
Pro Tip: Anchors do the same thing. Crazy.
I love people who use anime rules irl such a fun part of our society
Best thing in this vid was the bag.
Everytime a video is starting with a glue gun you know its going to be garbage
This thing would only work on a dry wall or a wood wall. And i would not put anything important on top of that .
The wall plugs open up when the screw Gets in that's why it's solid
I liked the backpack...
I like this types of idea fantastic
Pro tip: it take longer to dry than going to a local hardware shop to get a tox
It's not a bad idea but i don't imagine hot glue sticking well to the inside of drywall material.
You are like the five minute crafts of handymen.
Nice. A but plug!
Honestly, a decent amount of weight would probably rip that glue right out.
Nice backpack
Pro tip: This doesn't work.
Explanation: That plastic case you put inside the hole isn't just to avoid the screw to SCREW the wall (pun intended, but actually it has a mechanism wich expands once the screw goes in, locking the whole thing in place making it very hard to pull it out if it isnt unscrewed.
Главный вопрос: "Долго ли это будет держаться?"
"Nailed it"
Tapping bits ?
Oh you mean drill bits and anchors and screws ?
You don't tap a wall, you use anchors 😂
All thats missing is elbow macaroni and glitter
Buy dowel anchor, its easy and suport more weight
Make a bigger one for a bigger screw 😏
Imagine living in a home where everything inside is DYI life hacks... its just a matter of time before stuff starts crumbling to the ground.
You aren't unscrewing a bolt incased in hot glue like it were a mold. Also using the bold while the glue hasn't dried yet would be more effective and simpler.
Also you can use any wood stick
не проще в просверденное отверстие напихать спичек/зубочисток и вручивать? нораздо надежнее держаться будет
Plugs are cheaper to buy than a glue gun
Mollys really be in the corner of depression
POV someone says and that is why my wall is yellow
A bit of yellow clean up wouldn't hurt, will you?
В России просто втыкают 2-4 спички и закручивают)
Why is this better than using concrete anchors???
You could just get a tool to thread wood. Like maybe nail a piece of wood to the wall and thread a hole you drill into it. This just looks awful, after a few days its gonna break especially with a hanger supporting a backpack.
Or you could just get screws.
Don’t do it! Broke my tv
Can we start a GoFundMe so this man can get a $0.99 fastener at Home Depot?
Ah yes, inject cheese into the wall. I never would have thought if that.
It could actually be helpful if it wasn't a big mess
So no plugs? Just glue?
Meaning that is holding barely much pressure inside the hole, and eventually will slide out
Дюбели:
Ну да, ну да, пошли мы нахер
Don't do this to your drywall. Only cinder block,like in the video.
Him after cutting the glue nail in half
Me : ayy that looking kinda sussy
Or you can go to the hardware store and buy the right anchor for the job
That is civilization before fischer invented
Apply oil to the screw first
Good job. But take along time
Nice foam filled pack. I can tell by the way you held and moved it, it's not heavy at all.
A cheaper and much easier way, use a raw plug
Please for the love of god learn the toothpick trick, if a hole is too big or stripped for a screw stick a toothpick in it so the screw has something to grab onto and the force of the screw will jam the toothpick in place
Me:My ass is broken
5minute craft:GLUEGUN
Proper holders arent expensive :D just use them…
I would be shocked if anyone actually thought this was a good idea.
Or ya know, just buy an anchor and be done with it forever?
When a 4 dollar brick wall anchor is just too much...
« ARE YOU WINNING SON »
Wall plug and screw is all that's needed, not a machine screw, a hole to big and glue that won't hold long
I didn't think it was possible to "Rip Off" five minute crafts
Best practice!)))
These videos are funny
Thing for handle purses: 1 dollar
GLUE GUN: 1K DOLLARS
Use copper wire in the hole rather than wall plugs or this stupid idea. (Works on block or concrete)
Wall plugs are quite literally pennies…
10x more work and 1 tenth the durability of the $0.20 invention made to solve this problem.