@@The.Innovative.Indian we are currently doing our thesis and it is also a pfc in single phase, we are having a hard time at the moment because as soon as we parallel the capacitor in our load the values such as apparent, power factor, will decrease
Obviously load will define the power factor fluctuations but the right amount of capacitor value will correct the power factor... here in your case your capacitor might be too high or too low in accordance with the load.
Calculate the Power Factor (PF): First, you need to determine the power factor of your home's electrical system. The power factor is a measure of how efficiently electrical power is converted into useful work. It is a number between 0 and 1, with 1 indicating perfect efficiency. You can measure the power factor using a power quality analyzer or consult your utility bill for power factor information. Ideally, you want a power factor as close to 1 as possible. Determine the Required KVAR (Kilovolt-Ampere Reactive): KVAR is a unit of measurement for reactive power. To improve the power factor, you need to introduce capacitors to provide reactive power. The formula to calculate KVAR is: KVAR = KVA × √(1 - PF^2) Where: KVAR is the required reactive power in kilovolt-amperes reactive (KVAR). KVA is the apparent power in kilovolt-amperes (KVA). PF is the desired power factor (between 0 and 1). Measure or Estimate Apparent Power (KVA): You'll need to measure or estimate the apparent power (KVA) of your electrical system. This can vary based on the loads and appliances in your home. You may need to consult your utility bill for information on apparent power, or you can estimate it based on your electrical usage. Calculate the Required Capacitor Rating: Once you have the KVAR and KVA, you can calculate the required capacitor rating in kilovolt-amperes reactive (KVAR): Required Capacitor Rating (KVAR) = KVAR Select the Capacitor Size: Capacitors come in various sizes and ratings, typically in microfarads (µF) or kilovolt-amperes reactive (KVAR). You may need to convert the KVAR value you calculated to the appropriate capacitor size. Be sure to consider the voltage rating as well, which should match the voltage of your electrical system. Installation: Once you've determined the required capacitor size, you can purchase and install the appropriate capacitor. It's essential to ensure the installation is done correctly to avoid any electrical hazards. Consider hiring a qualified electrician to install and connect the capacitor safely. Monitor and Adjust: After installation, monitor the power factor to ensure it has improved. Adjust the capacitor size if necessary, as changes in your home's electrical load may affect the power factor over time. Keep in mind that improving the power factor too much can also be problematic, so it's essential to strike a balance.
No it's not an arduino project but you can make it on arduino as well we are using programming over here and the programming is done in 8051 microcontroller
Right now the cost of this project is 5800 rupees and if you want to assemble this project want to make this project then you can contact on the mobile number 868 488 4488
The code and circuit diagram is given in the description of this project but if you want more data then you can contact on the number given in the video
You probably dont give a damn but does someone know a trick to get back into an Instagram account? I stupidly lost my password. I would love any help you can give me!
@Quinton Maison Thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff now. Seems to take quite some time so I will get back to you later with my results.
As a inductive load I am using a choke coil over here which we generally used in the tubelight . But nowadays there is LED light but earlier we use to use the tube light and in that tubelight we use to use the choke and that choke I am using over here
@@The.Innovative.Indian and one more thing..in this project ... Power factor information is lag side or lead side...Show that information also in this circuit diagram...It is very important thing
Ok sure if you don't find the data over here in the description of this project then just call on that number given in the video you can WhatsApp as well then all the assistant will be provided you over there
@@The.Innovative.Indian On your site there in No details about this project .Sorry sir but I haven't received any email.Can you send program and ckt diagram over email.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Which inductive load is used in this project & rating of inductive load
Tubelight choke coil have inductive load and we are using that for the demo purpose in this diy
project
A kit k se buy kar sakte hai
circuitsbazaar.mojo.page/project-order-registration
Mujhe documantary send kardo bhai
I Want this project my final project of year
hello sir, may I know what type of capacitor did you use?
Its AC capacitor
@@The.Innovative.Indian we are currently doing our thesis and it is also a pfc in single phase, we are having a hard time at the moment because as soon as we parallel the capacitor in our load the values such as apparent, power factor, will decrease
So we are thinking if the loads are the problem or its the capacitor
Obviously load will define the power factor fluctuations but the right amount of capacitor value will correct the power factor... here in your case your capacitor might be too high or too low in accordance with the load.
Calculate the Power Factor (PF):
First, you need to determine the power factor of your home's electrical system. The power factor is a measure of how efficiently electrical power is converted into useful work. It is a number between 0 and 1, with 1 indicating perfect efficiency. You can measure the power factor using a power quality analyzer or consult your utility bill for power factor information. Ideally, you want a power factor as close to 1 as possible.
Determine the Required KVAR (Kilovolt-Ampere Reactive):
KVAR is a unit of measurement for reactive power. To improve the power factor, you need to introduce capacitors to provide reactive power. The formula to calculate KVAR is:
KVAR = KVA × √(1 - PF^2)
Where:
KVAR is the required reactive power in kilovolt-amperes reactive (KVAR).
KVA is the apparent power in kilovolt-amperes (KVA).
PF is the desired power factor (between 0 and 1).
Measure or Estimate Apparent Power (KVA):
You'll need to measure or estimate the apparent power (KVA) of your electrical system. This can vary based on the loads and appliances in your home. You may need to consult your utility bill for information on apparent power, or you can estimate it based on your electrical usage.
Calculate the Required Capacitor Rating:
Once you have the KVAR and KVA, you can calculate the required capacitor rating in kilovolt-amperes reactive (KVAR):
Required Capacitor Rating (KVAR) = KVAR
Select the Capacitor Size:
Capacitors come in various sizes and ratings, typically in microfarads (µF) or kilovolt-amperes reactive (KVAR). You may need to convert the KVAR value you calculated to the appropriate capacitor size. Be sure to consider the voltage rating as well, which should match the voltage of your electrical system.
Installation:
Once you've determined the required capacitor size, you can purchase and install the appropriate capacitor. It's essential to ensure the installation is done correctly to avoid any electrical hazards. Consider hiring a qualified electrician to install and connect the capacitor safely.
Monitor and Adjust:
After installation, monitor the power factor to ensure it has improved. Adjust the capacitor size if necessary, as changes in your home's electrical load may affect the power factor over time.
Keep in mind that improving the power factor too much can also be problematic, so it's essential to strike a balance.
Is it possible without measuring current sensing.
No you have to go through this procedure it's not possible without current sensing
What's max load this board can support
upto 3k watt
Can you share with me the circuit diagram..
Or proteus simulation?
Ok.. Sure just drop us the mail
Hello, did you received my email
@@nevilharv3698Hello...?
How much is the cost of this project?
www.circuitsbazaar.com
How you are measuring power factor in this ckt.
If you want the data regarding the circuit then you can message on the mobile number given in the video
Microcontroller me konsi programming use ki hai?
Embedded C programming
how to make the capacitor to holdon during power factor correction until the inductive is off in automatic power factor correction
it simple just change the program to handle the capacitors
Sir is this an aurdino project I mean no coding is used in this project
No it's not an arduino project but you can make it on arduino as well we are using programming over here and the programming is done in 8051 microcontroller
Hello. Can the circuit determine if the phase shift is leading or lagging? I mean if the load is capacitive or inductive?
Yes there is a calculation method in the circuit which will decide the lagging and leading
What is the rating of C.T?
Rating 1.25
What is the cost of this project?
Does sir replied to you ?
@@samikshasarode2964 no
You can message on the number given in the video or we can directly call over there
Right now the cost of this project is 5800 rupees and if you want to assemble this project want to make this project then you can contact on the mobile number 868 488 4488
Can we connect 3 phase induction motor to its output?
Yes we can but have change the wiring for that
Hello sir, i'm from souther africa how can i get access of the kit,and codes?
Please visit the web circuitsbazaar.com or drop message on +91-8684884488
Hello! Please send me Project's circuit diagram and code to my mail
Total cost???
56,00
Greater project...
Thanks❤
Bro i am from Bd and I want buy this product... How can i get it
go through the full video you will get everything
Sir... In this project used arduino ??? So what changes in ckt diagram,??
you have to program it again and need to change the pin numbers
i need kit for 1kw transformer
inverter
Making of that is also possible
Muze ye project chahiye..cost kya hogi ..ye project ki..
Right now 5800 rs
If you don't mind....
To get the Coding and ckt diagram..
The code and circuit diagram is given in the description of this project but if you want more data then you can contact on the number given in the video
Did You convert Current signal into Voltage signal for measure current....?
Yes you have to do this
sir what code did u use for microcontroller. can i have it???
sure right now 5600 Rs.
call on 8684884488
What is rating of step down current transformer
12 - 0 - 12 transformer
give me ckt and program?
your mail
Golfrizwan@gmail.com
Plz send me circuit and programing
@@Rizwankhan-ej8usHello did u get the circuit diagram and code
Can you send the circuit diagram and program
Bro what about capacitors what type of capacitors can i buy and can you give me buying link
we are using 10 UF AC Capacitor
circuitsbazaar.mojo.page/project-order-registration
you can call as well to book it ... 86-8488-4488
Can you provide the code and circuit diagram of this project?
sure ... please mail us regarding this ... we will reply you ...
@@The.Innovative.Indian Please, Check the mail
@@mishondas6180bro will you plz tell how can i program the microcontroller??
@@mishondas6180Hello bro... Do u have circuit diagram and code...?
well designed. i will call tomorrow to get the kit. this is what i need. good presentation, clever circuit.
thanks for appreciating
You probably dont give a damn but does someone know a trick to get back into an Instagram account?
I stupidly lost my password. I would love any help you can give me!
@Mohammed Wyatt Instablaster :)
@Quinton Maison Thanks so much for your reply. I got to the site thru google and im waiting for the hacking stuff now.
Seems to take quite some time so I will get back to you later with my results.
@Quinton Maison it worked and I finally got access to my account again. Im so happy:D
Thanks so much you saved my account :D
Sir I need this project. How can I contact you
Call here to book 8684884488
Hello! Please send me documentary including circuit diagram and code to my mail
How much money cost to make this project?
How much the kit price
5800 Rs can call on +91-8684884488
can i have full steps how u started performing ur project plz
You will get on your mail id
send it to me plz the steps
I want to do this project on STM32F407 Discovery Board. Kindly, provide me circuit diagram, code or any helping material.
In future we may provide you solution on this microcontroller
I can work but just need logic in any microcontroller or any helping material
If Mixed loads then sir..Resistive and inductive load ....this circuit work and switching automatically capacitors bank according load up and down
circuits automatically can sensor this change
I want to buy this project
The payment for this project is 5800 rupees you can just contact on the number given in the video
sir what will be the cost of all equipments which are used here?
approximate 5800
Kit kitne ki pdegi
5600
If there is any problem you have faced and how have you tackled them? Ans like interviewer ask
Initially relay switching problem was there, but then i changed the transistors, problem solved...,.
Cost of project
Right now the price of this project age 5800 rupees but prices vary depending upon the market
Bhai do you deliver this at Maharashtra with cod
Cost of project???
Contact our team
please give me circuit diagram and microcontroller program this project with value of circuit components.
Hello...?
bro where can I found circuit diagram of this project
WhatsApp on 8684884488
Sir i want this project please tell me how much cost pay for this project.....🙏
Right now the price of this project is 5600 rupees
Hello! Please send me Project's circuit diagram and code to my mail
someone knows what is he using as inductive load??
As a inductive load I am using a choke coil over here which we generally used in the tubelight . But nowadays there is LED light but earlier we use to use the tube light and in that tubelight we use to use the choke and that choke I am using over here
Great work sir
Very interesting for me
Can this project be made with arduino??
Yes, of course
@@The.Innovative.Indian please make video for it
please make cideo for it? ha ha. making it with arduino is your job. you do it and make video for it. he made it with microcontroller.
@@The.Innovative.Indian
Great work , I want this for my FYP ....
Would you please give me the manual and programming code as well....?
Sir , I want to make this project for my DEE final year, I need a circuit diagram, please help me.
Check description
@@The.Innovative.Indian
No thing there !!!
Can yo make this project convert into a device, and use in domestic house purpose to control power factor
Yes we can work on this requirement
@@The.Innovative.Indian and one more thing..in this project ... Power factor information is lag side or lead side...Show that information also in this circuit diagram...It is very important thing
Help me I'm a final year student in electrical diploma I want to make that project
ok ... plz contact on the number in the video ... we will help you out...
Hello! Please send documents, circuit diagram and code to my mail
Please send me, it very important for me, I have to submit my project on APFC
Plz follow the link in the description
Hello! Please send me documentary including circuit diagram and code to my mail
Sir ye project mujhe Lena he
Ok please contact on the number in the video
Hello! Please send me documentary including circuit diagram and code to my mail
Nic project
Thanks a lot
I want this project can you please give details
yes contact on the number given in the video
Hello
Can u please send this project documentary to my mail
Sir can you send me the documents and program regarding this project its is very good project I want it for final year project
ok ... sure you can contact ,85,71,96,44,88
Did you get the project details
This project in rate
Please check description ...
Cost?
5800 rs
Cost kya he Iski?
5800 Rs
Hi bro do you have a proteus simulation for this project? Can u help
Plz sir can you send program and circuit diagram... Plz sir I need it
ok sure please call at 8571964488
Sir i want this project
Please contact
Hello
Can u please send me documentary including circuit diagram and code
Plzz send me ckt diagram of this project
you can contact on the number given in the video
Sir Can u plz provide the circuit diagram on this project
Ok sure if you don't find the data over here in the description of this project then just call on that number given in the video you can WhatsApp as well then all the assistant will be provided you over there
Please sir iska circuit diagram provide kra dijiye
You can contact on the number given in the video if you I want the data of this project
I want this project my final year project.
OK no issue you can just contact us I will supply you this project
Sir, please help me...
I want to make thin on my college project. Please send me ckt diagram and programs
Sir...Give me ckt and program ?
Virendrakhobragade088@gmail.com
sent please check
@@The.Innovative.Indian On your site there in No details about this project .Sorry sir but I haven't received any email.Can you send program and ckt diagram over email.
Sir I want program
Please give me program
Sir you are very helpful to students so can u provide code and circuit diagram of this project
sure just drop us the mail
@@The.Innovative.Indian gauravchanawala147@gmail.com
Me too sir.please nanangjeni86@gmail.com
@@The.Innovative.Indian sir plz send me program
My email vickeyksingh047@gmail.com
Hi sir. Can I have the code and circuit diagram..
Sir I want to kit
Ok we can provide you this gift because we have in stock and you have to contact on the number given in the video for that
sir aap kaise banaye hai
Contact our team they will guide you on this
Hi sir .Can u do provide the code and the circuit diagram for this set up
Check description
Helpful to me
Glad it helped
Can u made one for me
Sure👍
Please give me a circuit diagram
Aap ko kiye contact kare
I didn't understand your question please speak in English or Hindi
please Give me circuit diagram and code
Block diagram and circuit diagram
Mail sent
please share the circuit diagram and code
Please pay attention to description complete article link is given there
Hello
Abstract
Circuitsbazaar website
Soon
Ok I think you want this project soon no issue you can contact on the number given in the video
Pp
please check gmail inbox
Sent you already the mail
Cost?
5800