自製木屑爐 / DIY Sawdust Stove

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии •

  • @kayesweet4350
    @kayesweet4350 Год назад +1

    The metal lid inside was a good idea, instead of sand. Good job. I like it.

    • @tenwrzasku
      @tenwrzasku Год назад

      Hey. What You mean by sand? I like lid inside too

    • @kayesweet4350
      @kayesweet4350 Год назад

      I like the metal lid better that's all. Good job.

    • @MarkThomas123
      @MarkThomas123 Год назад +2

      @@tenwrzasku Keep the sawdust burning from the inside vs top.Create the rocket effect. It will burn faster/hotter if you keep the flame in the middle and won't cave in and smother the air coming in.

  • @MarkThomas123
    @MarkThomas123 Год назад +2

    The Next one you build.
    1) Bring Intake Air, In from outside is better. No warm air from shop leaving through the Stove.
    2) Lower your exhaust to just above the middle of the drum, and it will be much better/hotter.
    Drum will get much hotter on top and Radiate into the shop better.
    Exhaust Pipe will become much cooler. More Heat in the Shop Now.. Much better.
    Everything else is good.. Correct Size and Ratios. Longer Exhaust outside, the Better the draft.
    Always: More Intake Volume Available than Air that Enters the Drum. Hot Air Expands. Ratios Important.
    Nice Roubo Style Workbench
    ------
    您建造的下一個。
    1)引入進氣,從外部進入更好。商店裡沒有熱空氣通過爐子離開。
    2)將排氣降低到滾筒中間上方,這樣會更好/更熱。
    鼓的頂部會變得更熱,並且更好地輻射到商店中。
    排氣管會變得涼爽得多。現在商店裡更熱了..好多了。
    其他一切都很好......正確的尺寸和比例。室外排氣時間越長,通風越好。
    始終:可用的進氣量多於進入滾筒的空氣量。熱空氣膨脹。比率 重要。
    漂亮的 Roubo 風格工作台

    • @sci-a
      @sci-a  Год назад +1

      Thank you for providing your valuable insights.

  • @Deli-oglan
    @Deli-oglan 11 месяцев назад

    Verimsiz bir soba. Daha iyilerini gördüm. Rusları bu konuda takip etmenizi isterim.

  • @alfredoavila
    @alfredoavila Год назад

    Hola! Por donde entra el aire para la combustión? Saludos

    • @sci-a
      @sci-a  Год назад +1

      Air intake from drawer box fired from below

  • @rickridgeway905
    @rickridgeway905 8 месяцев назад

    11:00 looks like you are welding a galvanized elbow. That is Zinc or Cadmium plated and extremely toxic to breath the heated fumes from welding.

  • @郭文鋒
    @郭文鋒 Год назад

    你好
    請問你是台灣人?
    感謝
    感覺你的工具跟機器都是台灣的!

    • @sci-a
      @sci-a  Год назад +2

      你好,是的,我是台灣人。
      機器除了帶鋸機之外都是台灣的。
      謝謝你觀看我的頻道!