Hi, you said that the Active speaker which has an inbuilt amplifier, which is enough to power the additional passive speaker without any need for additional amplifiers. Will the performance still be good enough ?
Hi Eric, if I already had a PK108 (passive) and I purchase another PK112A then connect it to my PK108 is it OK? What will be the power output they will result?
Hi Eric! Great video, It would be really helpful if you could give the dimensions of PK112a. I'm going to order one myself but I can't get accurate dimensions from the amazon seller
you said when you power the passive speaker with the amplified speaker that it is louder. Does this not just split the amplifier power between the 2? I would expect less volume with half the amperage. Am I wrong?
Can I connect the audio connection of the powered one from a mixer to the xlr or the 1/4 jack as it says mic 1? Isn’t it way to much volume since I’m hooking the mixers outputs masters or I get a 1/4 jack ? As I have tried or tested
Hi.. Mic 1 is just for mic input. Line signal from your mixer will overdrive this channel and get distorted. The only line input in this spk is the RCA
@@charlschuck6 you need to set it almost zero to get undistorted signal. And it will be easily distort the signal. This speaker is not very loud. Suitable for general speech usage
@@ericcheesaihoo Thats a surprise I heard one guy on youtube playing the speaker from a balcony and recorded the sound 500 feet away, seems like a good party speaker or even loud to practice music from a media player? The 300w 10 inch has half the amps, than the 600w 12 inch, seems like this would blast loud...
Eric, hi! I have a quastions. Please, tell me. Is it possible to connect an PK112A active speaker with any PK112A active speaker? Or we only connected PK112A active speaker and PK112 passive?
@antoine0569 Thats for 1 watt 1 meter standard sensitivity rating. I'm talking peak spl. 96 db is probably what output a phone would produce... not too loud
Hi Eric , I have been following your presentation on the Behringer PK112 series and DR-DSP series. However, I can't decide Which of these two are greater for live performance ?
@@timino8142 yes I used it for practice a couple of days ago. I got a mixer to make it a little louder because it was clipping a little bit, the microphone preamps, but yes it's is great for what it does. Haven't tried the Bluetooth on it yet, but that's a feature I don't see myself using that much lol
I personally do not recommended pk112 for stage monitor except you have very little money to spend. For stage monitor i would prefer to use active speaker. However pk112a is not recommended by me too due to same reason and the active version lack of balance line input (it only have unbalance RCA line input). topp pro x12a which i shared recently in my channel is much superior performance. Of course it is higher in price but it is an affordable one.
![If you can't hear this then you're not an audiophile [See description for link to followup video]](http://i.ytimg.com/vi/48PxwspDvrE/mqdefault.jpg)
![If you can't hear this then you're not an audiophile [See description for link to followup video]](/img/tr.png)
Is the trial in the video parallel using one active speaker and one passive speaker?
Thanks for the details!
Good luck!
Is there an echo and control in this device to use the mic?
Hi Eric
PK112A vs DR112DSP, which one is better?? Why?
Bro can u pliz mention that first song I really loved that one
Hi, you said that the Active speaker which has an inbuilt amplifier, which is enough to power the additional passive speaker without any need for additional amplifiers. Will the performance still be good enough ?
Good performance is subjective. But the additional output to passive speaker has identical performance
Hi Eric, if I already had a PK108 (passive) and I purchase another PK112A then connect it to my PK108 is it OK? What will be the power output they will result?
Not recommended as different size has different power rating and loudness
Hi Eric! Great video, It would be really helpful if you could give the dimensions of PK112a. I'm going to order one myself but I can't get accurate dimensions from the amazon seller
You can find it at behringer.com
you said when you power the passive speaker with the amplified speaker that it is louder. Does this not just split the amplifier power between the 2? I would expect less volume with half the amperage. Am I wrong?
hi, the amplifier run in 8 ohm speaker in single unit. when connected to second passive version, the amplifier run in 4 ohm.
Bro eric,, speakon dari pk110a boleh bagi hidup pk110 tak ?
Boleh
Can I connect it to smart tv using rca cable for karaoke? Thank you.
Yes if your tv could output dis audio
Can I connect the audio connection of the powered one from a mixer to the xlr or the 1/4 jack as it says mic 1? Isn’t it way to much volume since I’m hooking the mixers outputs masters or I get a 1/4 jack ? As I have tried or tested
Hi.. Mic 1 is just for mic input. Line signal from your mixer will overdrive this channel and get distorted. The only line input in this spk is the RCA
@@ericcheesaihoo even at low level mixer volume ? Ugh I just order one this sucks how loud does this unit get in real db levels ?
@@charlschuck6 you need to set it almost zero to get undistorted signal. And it will be easily distort the signal. This speaker is not very loud. Suitable for general speech usage
@@ericcheesaihoo Thats a surprise I heard one guy on youtube playing the speaker from a balcony and recorded the sound 500 feet away, seems like a good party speaker or even loud to practice music from a media player? The 300w 10 inch has half the amps, than the 600w 12 inch, seems like this would blast loud...
Eric, hi! I have a quastions. Please, tell me. Is it possible to connect an PK112A active speaker with any PK112A active speaker? Or we only connected PK112A active speaker and PK112 passive?
You can use Y cable to split the signal for 2 active pk112a
How loud does it get 120 db?
No it's 96 db or 100 db check thomann website
@antoine0569 Thats for 1 watt 1 meter standard sensitivity rating. I'm talking peak spl. 96 db is probably what output a phone would produce... not too loud
Hi Eric , I have been following your presentation on the Behringer PK112 series and DR-DSP series. However, I can't decide Which of these two are greater for live performance ?
Dr series
Thank you for your reply. I would want to get the Dr 112dsp for its performance
Is this unit loud for a band practice against an acoustic drum set?
to me no. to others may yes because of the low price.
@@ericcheesaihoo I bought it yesterday for a chance. I may be able to push it with compression or a preamp
@@Davidthestratman7 Has it been loud enough?
@@timino8142 yes I used it for practice a couple of days ago. I got a mixer to make it a little louder because it was clipping a little bit, the microphone preamps, but yes it's is great for what it does. Haven't tried the Bluetooth on it yet, but that's a feature I don't see myself using that much lol
Hi, are they stereo or only mono when connected as a pair ?
Mono
How is the sound quality compare to PPA500BT?
Pk112 Suitable for monitor stage?
I personally do not recommended pk112 for stage monitor except you have very little money to spend. For stage monitor i would prefer to use active speaker. However pk112a is not recommended by me too due to same reason and the active version lack of balance line input (it only have unbalance RCA line input). topp pro x12a which i shared recently in my channel is much superior performance. Of course it is higher in price but it is an affordable one.
je comprend vraiment pas l'interet de comparer une enceinte passive et une active , c'est bidon
Давления от них не ждите, баса тем более, по громкости они как 35-ти ватные колонки
Чо правда что ли ?
@@ilyavli правда!
@@ilyavli Хотя я перегнул, 35-ти ватки их перекричат в лёгкую
@@ilyavli но у меня версия 110, брал на подзвучку