It’d be nice though if they could actually make the Dual/Triple-Action Agipellers, as then would we see if it’d wash the stuff better with the Agitator Spiral Fins pushing the stuff down. Heck, they should also bring back the Drain Pump Reverse, where during Main Wash & Rinse, the Drain Pump would come on in reverse & push the Water up to make those rollover waves, like what the Direct-Drives did.
The spin cycle is very similar from a brand for here(Brasil) called Brastemp, (produced by Whirlpool), like the three stage spin mode but without the on/off by the water pump and the reverse from de motor, here the washer has a super brake that don't need that reversion.
A front loader like mine would've taken care of this load way better than this machine could, and I wouldn't even have to think about if they were clean or not
@@Blurain727If I ever had a Front-Loader though, I’d get 2 of the Washer/Dryer Combos, where it’s both a Washer & a Dryer in one Machine, as then would I be able to do some Wash Races between the Cycles on the two & make things a whole lot interesting, just like what both whichwasher2007 & Mieleguy1600 do with their Front-Loaders.
@@videolover2014that won’t do anything but only wash what is at the bottom… loading a different thing first changes absolutely nothing… you need a new washer because this one is not working because it is not getting the job done… plus, do you still have the washplate from this machine?
@@ScantPearYes, I still have it’s original Impeller to it, as it’s currently leaning right up against the right side of the WED5000DW2 Whirlpool Dryer.
I’m not a conspiracy theorist, but I’m convinced that they’re making washers like this to get us off top load machines. These machines are garbage. Get a real Newton made Maytag or even the old Whirlpool belt drives or a direct drive.
@@videolover2014 Every now and then I would have a string from a pair of sweats get caught under the agitator blade, but I’ve never had a problem with the agitators in general. The problem is it seems that people are now accepting bad as a good thing. A huge tub in that washer and yet it can’t effectually circulate a full load, which is a shame. I was all for these newer designs in the early 2000s but come to realize that tried and true is what works best after getting burned on a Maytag bravos X at only two years old . Everybody has their opinions and your mileage may vary.
@@patcola7335 Including my Mother, as the problem that she has with the Agitators is the Fin gaps on the Base, explaining why they get caught on them & ripped up to shreds, hence why she went to these Impeller/Agipeller Machines, since 2015.
Do you want me to try doing less Blankets at a time, next time I need to wash my Bedding? I had to pack the whole Washer ‘cause I had a bunch of stuff to wash, especially after I had the Covid. I basically had to wash the Covid right off to what I’ve touched during the time I had it, especially as I didn’t want to get anyone else sick.
Well, it’s a Washer of a different Color that I wanted to try, it has all the Options that meets my & my Family’s needs, installing a Maytag Pet Pro Agipeller to it has met one more of my & my Family’s needs, it’s a VMW Belt-Drive Machine, of which that I happen to like the VMW Belt-Drive Machines more, it has the Load & Go Option & Tray, which makes it easier on when adding the Laundry Detergent, the Fabric Softener is in a position where a separate Hose inside the Machine connects to it, which makes it pretty interesting Vs. where it’s normally as part of the Laundry Detergent/Fabric Softener Tray…even though the stuff aren’t moving around as good during agitation, I’d say that this is a decent Machine, going by the Features that it has, plus a custom Feature via installing the Maytag Pet Pro Agipeller to it & swapping out it’s original Impeller.
I love this machine
Great Post.. this washer is garbage You can only wash small loads if you want clean clothes. Bring back the real agitators from yesterday
It’d be nice though if they could actually make the Dual/Triple-Action Agipellers, as then would we see if it’d wash the stuff better with the Agitator Spiral Fins pushing the stuff down.
Heck, they should also bring back the Drain Pump Reverse, where during Main Wash & Rinse, the Drain Pump would come on in reverse & push the Water up to make those rollover waves, like what the Direct-Drives did.
The spin cycle is very similar from a brand for here(Brasil) called Brastemp, (produced by Whirlpool), like the three stage spin mode but without the on/off by the water pump and the reverse from de motor, here the washer has a super brake that don't need that reversion.
I can't see how this cleans any laundry....
Front Loaders ❤️
A front loader like mine would've taken care of this load way better than this machine could, and I wouldn't even have to think about if they were clean or not
@@Blurain727To be fair, this is not a good top loader. Some traditional ones could have handled this load just fine.
@@ThesweaterfactoryHowever, my Mother has problems with a DD Machine, as she basically has problems over the actual Agitators. 😕
@@Blurain727If I ever had a Front-Loader though, I’d get 2 of the Washer/Dryer Combos, where it’s both a Washer & a Dryer in one Machine, as then would I be able to do some Wash Races between the Cycles on the two & make things a whole lot interesting, just like what both whichwasher2007 & Mieleguy1600 do with their Front-Loaders.
@@Thesweaterfactory Even then I wouldn't trust it
What were the engineers thinking of at Whripool when they came up with this idea?
Don't blame the washer, when the human overloaded it.
Good video 😊
Thanks! 😁
This is sad, overload and not enough water
Blue blanket never got clean In that joke of a washer…
@@ScantPear Maybe next time I wash it, I can put it in first, so it can be on the bottom of the Drum, & then see what happens from there.
@@videolover2014that won’t do anything but only wash what is at the bottom… loading a different thing first changes absolutely nothing… you need a new washer because this one is not working because it is not getting the job done… plus, do you still have the washplate from this machine?
@@ScantPearYes, I still have it’s original Impeller to it, as it’s currently leaning right up against the right side of the WED5000DW2 Whirlpool Dryer.
I’m not a conspiracy theorist, but I’m convinced that they’re making washers like this to get us off top load machines. These machines are garbage. Get a real Newton made Maytag or even the old Whirlpool belt drives or a direct drive.
However, even a DD, or a VMW with the Agitator, my Mother has problems with the Agitators.
@@videolover2014 Every now and then I would have a string from a pair of sweats get caught under the agitator blade, but I’ve never had a problem with the agitators in general.
The problem is it seems that people are now accepting bad as a good thing. A huge tub in that washer and yet it can’t effectually circulate a full load, which is a shame.
I was all for these newer designs in the early 2000s but come to realize that tried and true is what works best after getting burned on a Maytag bravos X at only two years old .
Everybody has their opinions and your mileage may vary.
@@patcola7335 Including my Mother, as the problem that she has with the Agitators is the Fin gaps on the Base, explaining why they get caught on them & ripped up to shreds, hence why she went to these Impeller/Agipeller Machines, since 2015.
I always like whirlpool till recently this washer has the small removable scrubber always thought that was cool for stains
You shouldn't be packing everything down like that. You really think those blankets got washed?
Do you want me to try doing less Blankets at a time, next time I need to wash my Bedding?
I had to pack the whole Washer ‘cause I had a bunch of stuff to wash, especially after I had the Covid.
I basically had to wash the Covid right off to what I’ve touched during the time I had it, especially as I didn’t want to get anyone else sick.
@@videolover2014The washer is too full.
Terrible machine how sad
What's your opinion on this washer?
Well, it’s a Washer of a different Color that I wanted to try, it has all the Options that meets my & my Family’s needs, installing a Maytag Pet Pro Agipeller to it has met one more of my & my Family’s needs, it’s a VMW Belt-Drive Machine, of which that I happen to like the VMW Belt-Drive Machines more, it has the Load & Go Option & Tray, which makes it easier on when adding the Laundry Detergent, the Fabric Softener is in a position where a separate Hose inside the Machine connects to it, which makes it pretty interesting Vs. where it’s normally as part of the Laundry Detergent/Fabric Softener Tray…even though the stuff aren’t moving around as good during agitation, I’d say that this is a decent Machine, going by the Features that it has, plus a custom Feature via installing the Maytag Pet Pro Agipeller to it & swapping out it’s original Impeller.
Hey video lover
Can you send me the link again
@@macthepal9311 To Kirk Rivas’s Amana NTW4650YQ?
@@videolover2014 yes
No me convence, prefiero las oldies.
I hate top loaders
Why do you hate Top-Loaders?
@@videolover2014you overloaded the machine
@@videolover2014the blue blanket needed to be washed by itself.