Это видео недоступно.
Сожалеем об этом.
How Can I Diagnose and Fix a Dead Phone, Iphone 6S Plus, board repair, water damage
HTML-код
- Опубликовано: 12 сен 2017
- Ebay store: www.ebay.co.uk...
WebSite: sorinelectroni...
Patreon support: / electronicsrepairschool
RUclips Members: / @electronicsrepairschool
Forum: forum.sorinele...
Discord: www.sorinelect...
My tools: www.amazon.co....
PayPal me: www.paypal.com...
How are you so CALM and focused? Babies Crying. Problem Calls on the Phone. I wish i was that calm
over 10k viewed and only 225 liked. To learn what he teach would probably cost you 10 grand. how hard is it to press the like button?
it gets real hard when you get close to it , proper hard, my clicker gets heavy i cant move it its stuck :) but when i back up it works again :) how about yours ?
Cause, there are a lot of ungrateful people, just saying...
Computers repair Cote Saint-Luc some people don’t think of it or never like any videos. I enjoyed the video but I didn’t think to like it until I saw this comment
You are really amazing. More than the best. I learn so much from you but there is a big difference between look at you and do it myself. I will need a lot of practice and god, how much patience you have. Thanks again and keep showing us your big knowledge.
Such amazing skills & patience Sorin !
i dont mean to be so offtopic but does anyone know of a tool to log back into an Instagram account?
I was stupid lost my login password. I would love any tips you can give me
@Jefferson Marshall instablaster :)
Sorin, Is this your business? If not it should be. You dont need to work for anyone but yourself with the skill and knowledge you have.
It's very easy to start a business in the UK and make all the money for you and your family.
😀😀 nice you worked very hard on this. Hope customer pays you good for this.
I’m watching this as my phone is getting fixed my shop hoping they are as skilled as you 🙏
I saw that solder bubble touching into the capacitor when you return back the coil.
Hi just want to know about diagnosing shorted or dead motherboard.dows havig multimeter and dc power supply help me to point out the short thank you.
Another good video. Thanks
must be :)
Sir, Your tutorial is really great.Your video is very clear and your language is clear and concise.Sir, further, I am looking for your video tutorial that will really benefit me and community.
its absolutely fantastic job.
Apart from freeze spray, what other type of spray or alcohol can I use went finding a VCC/VDD_MAIN short, freeze spray is not available in my country. And where can I get the software for Board View and and Schematics
Hello, when you put your finger on the board whith amps, isn't it dangerous for you, and is there any risk of short ?! Can you explain ? thank you. Your videos are really great
It is DC current, so it's not bad. Worst case scenario is you get burnt because of the hot component. Also, if your hands are dry there is no risk of shorting the components, resistance of your skin is too large for anything to happen.
Aleksandra Dimanić “it’s only DC” when the skin has more resistance than the components. I dare you touch a dc line of a generator. Your muscles will clinch and you won’t be able to let go. Ac might give you a break.
@@FuttBucker42069 have you try it with variac
geoepi321975 I can’t say I purposely tried zapping myself, no.
It’s only 4V, touch voltage is
Really appreciate your videos mate, Do you do training programs? I'd be really interested in coming to you for training.
Man, he's at work and he's allowed to make public his daily routine. He probably has a family to spend time with. This is "coming to you for training"! Take it as it is! Watch the videos and learn as much as you can! IT IS FOR FREE! Te apreciez, Sorine!
Hello, good work, what temperature do you use to solder the chip. Thanks
Another good video,thank you
I had Toshiba Satellite L505-110 . in laptop graphic card was like a slot so you can plug out and check. When i give current a coil started to heat up but coils cant shorted because they are like a wire.. so i understand that something is gettin short after coil probably graphic processor... : /
many thanks, sir .
Master make me you student... i like your work and how you do it... 👍 keep it up.
Good practice and good work
👍👍👍👍👍
I want to see you do a long screw damage fix. :D
Nice work sir
Nice work sir thank you .
Your best teacher
Hi Sr. Thank you for the great video. I have a question how much does this fixing cost.? I also have a iPhone with water damage I want to fix it because I have many pictures in there and I did not do a back up. How can I send it to your shop for fixing. I have taken it to other shops but they just don’t want to deal or take the time to find the problem. I know it can be fixed you just have to take time to do it. Just tell me how can I send it and after you diagnose tell me how much for you to fix it. Thank you so much Sr.
Full respect to you Sir!
what is Vcc power rail?
main power rail, from there all the components get power
thank you Sorin
I like your work very much dear
thanks a lot for your vidoes
Lets see what is getting hot...great work...
Thank you sir for every thing
great , thanks ...
Amazing diagnostics. Well done! I'm wondering how i can run the same diagnostics without a power supply. Perhaps with a pack of batteries? But would that give the same ampere i don't know
Thank you!
What’s type of patrol you using please?
If you have a minute could you enlighten me why would iphone 6 develop a short on VCC main while not in use? It was working fine but after spending ~1.5y in storage - it is dead (short on VCC main somewhere). wth. What could've gone bad, how? it is like it has some wicked expiration date.
Hi quick question. Is they’re Any chance I send u my iPhone 6s motherboard and if can have look and repair it for me plz and how much will u charge me.
You everytime my favourite sir
you can run blackfish by pressing RIGHT click on its icon then Properties > Compatibility > Compatibility mode and select windows 7
Nice video
Thanks bro shared yours skills.
"I hate my working conditions" ... 🤣
Hello,
I have iphone 6 Plus not power not recognized by itunes and not showing anything on the display but its charging (0,9A), what do you think about it please ? Thank you
Good video, however what multimeter mode are you using for testing the short ?Thank you
ruclips.net/video/KZ4be5-MUZU/видео.html
I've an SE and I changed a U2/Tristar chip on it because the phone didn't charge up. After chip replacement the motherboard has PP_GPU and PP_CPU short. I used kapton tape to cover other parts and I used the hot air station on 350C. I think I did a good job but just in case I removed the IC (all pads look good) but the motherboard still has short circuit. The phone never had water damage. Can anyone tell me why has the phone short circuit and how can I fix it please? Thanks in advance. Anita
Hi dear , i have iphone 6s which is dead. when connect to dc power supply it has not short, but when press to power buttont it shows 0.04-0.05 A an stays on it nothing further, what it can be? can you give any advice? thanks in advance.
If u want too check heat on a chip use can of freeze spray on board watch the water/ice melt n you have your hot chip.
Good work again master..
Master ..how can i buy the schematic tool .like your use for iphone?
Tank you!!!
'i really hate my work conditions" hahahahahhaahahha
Out of Topic: is there not a similar schematics softwares but for car ecus and modules? PS: very nice Video Sir Sorin.
When you replace the board. Is there anyway that the data on the phone may be removed or corrupted?
What was the short on the battery terminals measuring in ohms? What should a good reading be here in a working phone, im guessing in the kilo ohms?
A typical normal "diode" reading on the (VBAT) battery terminal is about .350ohms.
@@OnYourSquare the diode reading is in volts, I was talking about the actual resistance measurement in ohms
Hi sir. May i know where can i get the program or schematics like that?
What is the program he is using for iphone schematic?
how cani get that iphone diagram program
Thank you Sir
you're a genius, wher's your shop?
where can i buy that pad to cool down the board?
no thermal camera ?
I have an iPhone nothing shows up and apple really can't figure out what the problem is any suggestions on how to fix it
How in the do l find a trusted shop in the uk to repair my dead iphone ? Not Apple!
I want to be trained online. Want to know how to go about that. Want to buy tools
hi i have a question. when i replaced some tablet lcd/digitizers screen , it come with tape. but it is coming loose again. what is the best method or tape to do the job ? so the screen is kept in place?
b7000 glue, thats what i use
If you dont have at hand the b7000 glue you can heat the lcd after installing it for 30 seconds at 60degrees,that make the double layer tape melt and a little more stronger
Where to get these donor boards from please suggest.
Amazing🙏🙏👍👍🤔
Would love to do this as a job
good video
''AAH THIS IS A MOSFET.... HAHAHA '' YOU ARESO COOL MR.SORIN & i LIKE YOUR VIDEOS FROM MOROCCO . KEEP GOING !!!!
Sorin, you need to explane ˝clining soldering ball˝ procedur.
How? Whay?
...
Greetings.
Hey I really liked the video. Can you please help me in troubleshooting my xiaomi MI 4? There is no water damage and nothing. It just died out while I am using it. I tried changing battery , screen nothing worked. So, pls help me. Thank you.😀
I'd start by sorting out if the problem is image or power related.
Using a "USB Amp meter", plug in the charge cable. If the voltage draw is above 0.7V, the phone is charging normally. The issue may be with image or backlight.
If the voltage is below 0.7V, that could be the charge cable, the dock flex, the charge circuit or other board related issues. But that is difficult to narrow down without specific I formation.
@@OnYourSquare Thanks
hello, can you help me with my iphone 6s plz. So the phone was in a loop in recovery mode, wont restore. good firmware, good cable, good computer, tried all on different phone and worked, but this phone did not. Anyway, yesterday i tried again with DFU mode, and it somehow as restroring untill 80% and phone shuts off by itself, i waited but nothing happened and it got stuck in DFU mode.
so again today the phones battery died, and now it wont even get recognised by the computer anymore, i let it for an hour on each side of the charging cable (because i noticed the phone only got recognised if u plug the cable on one side but if u switch it wont)
please help
did you fix it?
Pls sir What's the name of the program you are using for schematics?
zxwtool
I hope you bought a thermal camera by now
iphone 6s plus battery conection diogram pcb
Press tab key to Change board sides!
There you go, thank you :)
Can you make a video of electric components and there jobs and how to test pleaaaasseee!!
happy end
Hi ! what you mean by petrol ? simple cars petrol or other ?
Zippo lighter fluid. Has to be Zippo. Don't go for anything less.
I think he's referring to isopropyl alcohol
Sorin, do you have paypal?
Big thumb up
Sir, may i have a copy of schematic that u use in this video,can u email me,tq
you need a dongle for that, search for zxw tools
Thanks
www.ebay.co.uk/itm/ZXW-Dongle-Zillion-x-Work-Repairing-Drawings-Software-for-iphone-Samsung-LG-etc-/252692261714?hash=item3ad5a1eb52:g:olQAAOSwhOdXpEtR
or forum.gsmhosting.com/vbb/f631/free-zxwtool-everyone-2067889/
Metin2 on ur Work PC ? I see u r a men of culture aswell :D
Why do you use the rework station and the soldering iron at the same time? ---> ruclips.net/video/2rqcP1yaO8c/видео.html
For ground pins, you need constant heat. If i go high on temperature with solder iron, i can blow up some pads
Dedication
Where can I find the schematics for mobile phone like you have download?
Are you Romanian?
I've a water damaged 6splus.Want to make data recovery.How can I contact you?Need your help badly ....
click on 'about' section, you have a email address there
@subhankar : did you get your phone fixed?
Yves Stocky Not yet sir,your help would be highly appreciated.
@@subhankardas3530what did you do until now?
Yves Stocky Got to be repaired by a reparing shop,he used hot gun in motherbord to fix it but probly damaged it.don't know if its still reparable or not.
This is Mister "something is getting hot in here..."
Why don't you buy a cheap thermal gun which just shows you what is hot?
🤔
Hi team,
Motherboard broken due physical damaged.
And I don't know CPU chip IC is working or not. But some shopkeeper told me maybe CPU chip Ic is broken no one can fix it or get the data from this iphon6.
Also, i have check with shopkeeper, they told me motherboard broken but they are not sure for CPU chip IC has broken. They told if motherboard or CPU has broken no one can recover the data from this iphon.
Need ur help to recover my data or repair my iphon6
So please help me for my data.
Waiting for your help n support and share it email address to me so I can send my iphon6 picture s which is physically damage. And I tired to repair in India. Please tell me what should I do.
Please help to fix my phone I need my data on urgent basis.
Waiting for your help
Are sure fucking fix my cellphone
You really should edit to make these videos more efficient
😍😍😍😍😍
fix my phone
😤
the child craying is't yours ?
toooooooooooooooooooooooooooooooo much labor
Your fees must be really low.
I want to be trained online. Want to know how to go about that. Want to buy tools
I want to be trained online. Want to know how to go about that. Want to buy tools