I rode Ksyrium SL before for about 5 years, serviced the hub myself because when you stumped on the pedals hard, was making a very loud clunking sound. I found out that those 2 pawls were worn out, and those were the culprits. Cleaned the hubs, assembled it all again and sold it as it was. Never gonna ride mavics again, so overpriced for a 2 pawled hubs.
You can use a quick-release skewer, tighten by hand. Or buy a skewer that can be tightened with a 5mm Allen key. Or just be an animal and use a hammer!
You can use a quick-release skewer, tighten by hand. Or buy a skewer that can be tightened with a 5mm Allen key. Or just be an animal and use a hammer!
I rode Ksyrium SL before for about 5 years, serviced the hub myself because when you stumped on the pedals hard, was making a very loud clunking sound.
I found out that those 2 pawls were worn out, and those were the culprits.
Cleaned the hubs, assembled it all again and sold it as it was.
Never gonna ride mavics again, so overpriced for a 2 pawled hubs.
Hi, great video. Do you know whether it is possible to remove the part of the hub that the pawls sit in?
That free hub can’t be upgraded to id360?
You can use a quick-release skewer, tighten by hand.
Or buy a skewer that can be tightened with a 5mm Allen key.
Or just be an animal and use a hammer!
Hola, el procedimiento es el mismo para ksyrium RS?. Saludos
Can you post the tools and parts you are using for this job?
Yes, same request please.
Quick release skewer
Hello sir, many thanks for your pro vidéos, i am a pro also and the tool a 2min 34 is really great, do you have a link for buying it ? thanks !
It is my DIY tool.
You can use a quick-release skewer, tighten by hand.
Or buy a skewer that can be tightened with a 5mm Allen key.
Or just be an animal and use a hammer!
Do you offer a service to do this
thanks for the video
สวัสดีครับ มีช่องทางติดต่อมั้ยครับ
อยากซ่อมล้อmavic ksyluim 125ตัวนี้ครับ
Yo no puedo sacar el primer tope
Original or rather peculiar design but seems to be not very good or practical.
This video is of no use to anyone. Nobody has such professional tools at hand...
Sono strumenti fatti in casa molto facili da replicare