Thanks for the video. 🙂 For those wondering: - you need to hold the plug steel bar in while you pull on the plug. Ours took a lot of effort. - our 206CC 2.0 has a 6mm socket-head screw.
Thank you very much for this. I have a Peugeot 406 2.0 HDi 80 kw (D9) that had this exact problem for years. Changed the sensor and solved it. The dealer quoted me 97 eur for the part (OEN 616070). Bought a Valeo one for 25 eur from auto-doc and saved quite a bit of money. It was very easy to change
Hello there, I have a 5 speed manual 1.4 hdi Peugeot 206, I have code P0500 (Speed sensor A) and U0121 (Lost communication with ABS module), also the VSS stays at 10 kmh, I checked the speed sensor, but instead of the speed sensor I found a cover, the speed sensor has worked before btw, by any chance could the speed sensor be in a different position? Edit: the specific version of my 206 is a xsline from 2006.
I’ve managed to get the sensor out but getting the new one back in seems to be a problem just can’t get it to pop back in turns to 30 degrees the lot just doesn’t seem to be able to get down to the rubber o ring
Hi, do you know what year this is for, I have a 51 plate (2001) and apparently there are a few different locations for it depending on the year. Thanks.
hello. the needle of the speedometer it on zero tine jumping . i replace the speed sensor like in this video and it doesnot work .what should i do next?
my bolt is stuck ...... what can i use to get it out ??? theres not really much space to move about in there ... tried WD spray on bolt didn't help at all its just not budging ...
By the way my problem in this case is , its raving to much before changing gear ( 1.4 LX auto 206 ) its obviously broke code reader giving me P0500 i think
Thanks for the video. 🙂
For those wondering:
- you need to hold the plug steel bar in while you pull on the plug. Ours took a lot of effort.
- our 206CC 2.0 has a 6mm socket-head screw.
Thank you very much for this. I have a Peugeot 406 2.0 HDi 80 kw (D9) that had this exact problem for years. Changed the sensor and solved it. The dealer quoted me 97 eur for the part (OEN 616070). Bought a Valeo one for 25 eur from auto-doc and saved quite a bit of money. It was very easy to change
It's anti clockwise the pivot. I'm under the car like you and pivoted it clockwise like you said now I'm struggling.... Great
is it same sensor on 207 1.6 hdi 110hp as in peugeot 206 and is it possible to replace it on same way as here on video
Thank you very much! It helped me a lot to find the damn sensor!!!
Hello, did you drain gearbox oil before removing sensor or do I not have to worry about oil?
Is it 5 manual gearbox?
Thank you
No i didn t drain the gearbox. It is 5 manual gearbox
I did spill some oil and had to use a piece of cloth to stop oil from coming out
Hello there, I have a 5 speed manual 1.4 hdi Peugeot 206, I have code P0500 (Speed sensor A) and U0121 (Lost communication with ABS module), also the VSS stays at 10 kmh, I checked the speed sensor, but instead of the speed sensor I found a cover, the speed sensor has worked before btw, by any chance could the speed sensor be in a different position?
Edit: the specific version of my 206 is a xsline from 2006.
I’ve managed to get the sensor out but getting the new one back in seems to be a problem just can’t get it to pop back in turns to 30 degrees the lot just doesn’t seem to be able to get down to the rubber o ring
Thanks !!!
Hi,
do you know what year this is for, I have a 51 plate (2001) and apparently there are a few different locations for it depending on the year. Thanks.
+Joey Pierce Hello. This is a 206 hdi 2.0 year 2001.
+TutoBuild Eng thanks
hello.
the needle of the speedometer it on zero tine jumping . i replace the speed sensor like in this video and it doesnot work .what should i do next?
nisan cnafo have look on your whiering conection and cables you can have a short or cut whier
If the sensor is ok then you need PART NUMBER 264304 CITROEN its in the gear box at the long shaft side. Easy fix!
is this the same with 207?
my bolt is stuck ...... what can i use to get it out ??? theres not really much space to move about in there ... tried WD spray on bolt didn't help at all its just not budging ...
By the way my problem in this case is , its raving to much before changing gear ( 1.4 LX auto 206 ) its obviously broke code reader giving me P0500 i think
hi did you get your bolt out and if to what size Allen key did you use please?
why so hard pivot 30'?
wher cen i buy the speed sensor ??
Autodoc, amazon or your local car parts store.