Merci pour ce tuto. Je viens de terminer ce sac bouteille en l'agrandissant de façon à pouvoir y glisser ma gourde de 1 litre. J'ai également ajouté une grande sangle réglable pour pouvoir le porter à l'épaule. Le résultat est vraiment superbe et bien pratique. Encore merci pour ce modèle est les explications très claires.
Fabulous idea! I am going to make for gifts so my family can take drinks to the beach and keep their drinks cooler! Awesome video and many, many thanks for this gift idea!
I’ve been wanting to make this exact item & was dreading figuring out measurements. Thank you so much! I made this the first day you posted it. Very useful & cute!!
Perfect! Little modding and it's a perfect cycling (stem) bag, definitely doing this out of old water resistant jacket I'm no longer using that happens to match my bike. 💙
❤🇨🇵... Bonjour J'ai organisé un atelier autour de votre housse à gourde. Nous avons bien réussis L atelier Nous vous remercions de votre démonstration Et nous vous faisons une bise chacune ❤❤❤
Thete is definitely something wrong with the cut out measurements. If the width if Fusible fleece is 13cm. And your specifying to cut the sides at 6.5cm width, which is x2 thst equals 13cm. That is the width of the entire piece. I think you made s mistake in your video. With these measurements its physically impossible to make thia cut out. Plesee tells what those two side cut out shouod be.
You didn't indicate a starting point to where the 6.5cm begins and ends. When you drew those marks, there was no measurement. I had to use computer and some design software to automatically center a 6.5cm square so I could cut this right. Had you indicated the measurements for each mark you drew that would've been much easier.
Inch measurement is 2 5/8". I made box square for that size and used my design software to center it. There are no measurements given at where the marks are made on the interfacing.
Very nice❤
J’ai chercher, chercher... et trouver, formidable! Merci!
Je suis heureuse que vous l'ayez trouvé utile.Passez une bonne journée😊
Franchement de tout les tutos cest les vôtres les mieux expliquer encore un grand merci 😘😍
Perfect. I’m going to add a longer strap to carry over my shoulder. Thank you. ❤️🌺
Trop beau ❤🥰
Merci pour ce tuto. Je viens de terminer ce sac bouteille en l'agrandissant de façon à pouvoir y glisser ma gourde de 1 litre. J'ai également ajouté une grande sangle réglable pour pouvoir le porter à l'épaule. Le résultat est vraiment superbe et bien pratique. Encore merci pour ce modèle est les explications très claires.
👏👏👏 félicitations😄🎉
What measurement you used for bigger water bottle above 1 litter?
So nice design
What a great idea 💡 love it thank you for sharing. 😘
Excelente explicación
Gracias 😊
this is absolutely adorable.
I agree!
I swear everything you make is so easy to make. Beginner sewer over here and even I can make these !!!!!! Thank you
👍😍
Live this idea
Great idea❤😊 must try
I made it, but double the size for two bottles of water, and added pockets for keys & phone. Thank you!
I'm glad it was helpful to you.🤗🙆♀️💕
😊hola cómo hiciste la ampliación ?? Gracias ❤
Thank you so much for this video ! It is so detailed !
Thank you. Just what I was looking for.
Вы "заразили" своей любовью к сумочкам и косметичкам)) ТОже захотелось сшить что-нибудь этакое 💖💖💖💖💖
Fabulous idea! I am going to make for gifts so my family can take drinks to the beach and keep their drinks cooler! Awesome video and many, many thanks for this gift idea!
Amazing as always.. 👍👍👍👍 Thankyou so much for sharing.. ❤️❤️
Wow. I love this! Thank you so much for taking the time to share the making🥰
Thank you so much for your support! I'm glad you enjoyed the video😍
Very good idea. Thank you for yours tutorials.
It’s lovely! By the way, I like the new music 🎶 in your videos as background! 👍🏻👍🏻❤️❤️
It seams easy To make. .. I'm trying to sew one 🙈. Thank you!
Merci! Très jolie réalisation ❤
You are so talented ! I love your designs, especially the ‘bottle bag’. I can’t wait to make it ! 7:57
Thanks🤗
Very good idea, I think I will make it and carry it to college, thank you for sharing 🤗🤗
Excelente Idea...!! Hermosas las telas!! Muchísimas Gracias por compartir... Cómo siempre mi Like de apoyo por tu apreciado trabajo...
So much lovely, I was looking for this pattern
Lovely project ❤️ thanks for sharing ☺️
Esta muy bello.... Felicitaciones
Que hermoso se los voy hacer para mis hijo y para mí desde argentina besossss
I’ve been wanting to make this exact item & was dreading figuring out measurements. Thank you so much! I made this the first day you posted it. Very useful & cute!!
Good job🎉Have a nice day💕
روووووعة يعطيك الصحة و العافية
Hermoso, como todo lo que realiza. Bendiciones y saludos desde Colombia
Dear I like your video very much and I try all your videos which are very good then thanks for your use full video😘😘🙏
Perfect! Little modding and it's a perfect cycling (stem) bag, definitely doing this out of old water resistant jacket I'm no longer using that happens to match my bike. 💙
Muchas gracias!
Está increíble y bien explicado. Gracias por compartir! 😍
Esta super lindo y practico ese proyecto muchas gracias por compartir un saludo desde Colombia
Like from 🇱🇰 SRILANKA
❤❤❤❤❤
Consegui fazer a minha amei,muito obrigada por nos ensinar Deus te abençoe ❤🎉
Aca estamos en verano todavía, así que viene perfecta la idea!! Muchas gracias!!
Hermosooo😍😍
I love it! Could You do a bottle transport with a cellphone pocket? Will be amazing!
Muy linda funda !! Gracias no conocía tu canal
Hola🙋♀️Que tengas un buen día😊
Gracias por compartir ❤
Yo he aprendido muchísimo contigo! Eres la mejor!
تسلم يدك😘😘😘
Che bella idea per le bottiglie di vetro. Così non si rompono!
Genial 👌 gracias por compartirlo!! Me encanta todo lo que haces 😃
Saludos desde México ❤️
곧 개학 새학기 물병파우치로 좋아용
Merci
Lindo trabalho 😍 Obrigada por compartilhar conosco!!!
Obrigado🍀Tenha um bom dia😄
❤ tradurre in italiano, qua' siamo in Italia, grazie
❤️❤️❤️❤️
Bom dia! Amei este projeto!
💗💗💗
👍👍👍👍💯💯❤❤✋✋✋
Amei, obrigada 🥰
Obrigado.Tenha um bom dia😄
Bonjour, est il possible de mettre un isolant de 3mm entre les couches de tissus ? Pour un effet isotherme. Metvib😊🙇🏻♀️
Merci pour vos bons commentaires.😄🌻
👍💜
❤🇨🇵...
Bonjour
J'ai organisé un atelier autour de votre housse à gourde.
Nous avons bien réussis
L atelier
Nous vous remercions de votre démonstration
Et nous vous faisons une bise chacune
❤❤❤
Je suis heureux de vous aider.👍🤗💕
항상 몇번씩 보며 따라해보기도 한답니다~~^^
이 원단 혹시 구매링크 부탁드려도 될까요??
영상 좋아해주셔서 감사합니다.
원단 구매링크를 안내해 드리지는 않고 있습니다.
좋은 하루 보내세요😍
Need a bigger one lol 40oz hydro water bottle
Amei muito obrigada 😘
Se le puede poner algún material que sea térmico,para mantener la botella ya sea fría o caliente
Now, how to make this so it can affix to a bike frame with drop handlebars - the type on road bikes.
Saludos! Que tipos de telas estás usando?
Che aiporu umi tela de algodón de tejido sánto. Aguyje.😄🙋
Which kind of fabric do you use for your bags
I used plain weave cotton fabrics. Thank you.😄🙋♀️
could you share the pattern as a downloaded document, please?
The pdf pattern is here.
insewingtimes.com/product/bottle-bag-pdf-sewing-pattern-st438
But there is no documentation. Thank you😄🌻
Bonjour pourriez vous me dire si les mesures que vous donnez son pour une bouteille de 1 litre .Merci belle journée
On dirait qu'il conviendra à une bouteille d'eau de 500 ml.😄🌻
Hi, where do you buy your fabrics?
I bought it here in Korea. Thank you.😄🌻
Can you show how you make the measurement ?
It is hard to explain briefly. I'm sorry.😅
Thete is definitely something wrong with the cut out measurements. If the width if Fusible fleece is 13cm. And your specifying to cut the sides at 6.5cm width, which is x2 thst equals 13cm. That is the width of the entire piece. I think you made s mistake in your video. With these measurements its physically impossible to make thia cut out. Plesee tells what those two side cut out shouod be.
It's not like cutting the side by 6.5. Because the bottom is 6.5, cut off both sides except 6.5 from the center.😄🌻
You didn't indicate a starting point to where the 6.5cm begins and ends. When you drew those marks, there was no measurement. I had to use computer and some design software to automatically center a 6.5cm square so I could cut this right. Had you indicated the measurements for each mark you drew that would've been much easier.
There’s is definitely something wrong with your inch measurements. What should that center measure and then I’ll just figure it out
Inch measurement is 2 5/8". I made box square for that size and used my design software to center it. There are no measurements given at where the marks are made on the interfacing.
The measurements for the cutout are ambiguous!! Frustrating!!
Did you have issues making it? What to avoid ? I want to make it 😮