DIY: Make Assyrian Long Bow from fiberglass strip and PVC pipe | horse bow not from steel or bamboo

Поделиться
HTML-код
  • Опубликовано: 10 дек 2024

Комментарии • 79

  • @BackyardBowyer
    @BackyardBowyer 11 месяцев назад +5

    That's a very interesting way to add PVC to the bow. It makes it look like it's covered in sinew and has a horn belly.
    Beautiful work!

  • @ARCHERamitkumar
    @ARCHERamitkumar 10 месяцев назад +1

    Thank you so much brother 😊 आपने बहुत अच्छी तरह से धनुष बना कर दिखाया है

  • @andrejochimsen3478
    @andrejochimsen3478 Год назад +1

    I think your method is very good.. like it.

  • @jakeammon8280
    @jakeammon8280 Год назад +2

    It's beautiful and works well

  • @richardteresacrenshaw8529
    @richardteresacrenshaw8529 9 месяцев назад +1

    Beautiful man !

  • @yvesstjean8618
    @yvesstjean8618 Год назад +1

    You are very talented buddy!!!!.... beautiful

  • @WhittleManDan
    @WhittleManDan 3 месяца назад +2

    Awesome thanks going to make one

  • @fabriceboel57
    @fabriceboel57 Год назад +2

    Super c'est le plus abouti et le plus soigné du genre pourtant je ne comprends pas pourquoi tu n'as pas choisi de doubler l'épaisseur sur toute la longueur de l'arc?🤔 joli travail je vais m'en inspirer pour le mien merci 👍🇲🇫❤️

  • @dongrc6022
    @dongrc6022 2 года назад +2

    cool bong

  • @kotekliyorukilyas6245
    @kotekliyorukilyas6245 2 года назад +2

    çok güzel yaptın usta eline sağlık teşekürler

    • @backyard.craftsman
      @backyard.craftsman  2 года назад

      İzlediğiniz için teşekkürler. zevk aldığına sevindim.

  • @RKie-hv6ci
    @RKie-hv6ci Год назад +1

    Amazing skill!

  • @johnprentice1527
    @johnprentice1527 Год назад

    Very nice build.

  • @egyanggara5176
    @egyanggara5176 Год назад +1

    thanks for sharing ...

  • @dasturchi1426
    @dasturchi1426 Год назад

    Zo'r chiqibdi, qoyil👍🏻.
    Biz musulmonlar uchun kamon otish sunnat. Rahmat men ham kamon yasamoqchi edim, bu videoingiz katta yordam bo'ldi🤝🏻.

  • @fredfloppel7378
    @fredfloppel7378 11 месяцев назад +4

    The craftsmanship is undeniably fantastic. Very nicely and skillfully done. That being said, I can't help but point to the many different seams and connection points, every one of which being a weak point for a tool that is meant to stand up against a lot of pressure and stress. I just can't help but feel like each one of those connection points creates a weak point, and the fact that it's mostly held together with glue, just seems like it might last 1 or 2 seasons, if you're lucky. Not sure what kind of glue you're using, but this just doesnt strike me as something thats going to hold up to the regular stress, season after season. I feel like that glue is going to let go and fail under such pressure...eventually. If we add extreme temperature fluctuations, as are common for hunters to experience, I'm not sure I'd trust it as my go-to. Glue and cold don't mix very well. 🤷🏻‍♂️

    • @backyard.craftsman
      @backyard.craftsman  7 месяцев назад

      thanks for the oppinion. I used super glue with nylon string to bond the joint. I think it also depend on the quality on the string. the one I am using hasn't dispppiont me.

    • @fintonmainz7845
      @fintonmainz7845 7 месяцев назад

      Commercial bows are glued together. Airliners are glued together

  • @clinttorres2508
    @clinttorres2508 Год назад +2

    Beautiful functional art..subscribed 👍

  • @dingdingho
    @dingdingho Год назад

    nice bow

  • @stefanhansen5882
    @stefanhansen5882 Год назад

    Super cool and inspirational! Where in the world are you shooting?

  • @GiorgiosPataki-du4bh
    @GiorgiosPataki-du4bh Год назад +1

    Este arco estilo asirio, te quedó realmente bello. Y ¿sabes? Me recuerda al arco clásico egipcio antiguo, porque no es curvilíneo. Quisiera reproducir tu trabajo, tomando prestados algunos elementos y procedimientos, para crear mi arco.
    ¡Felicidades!
    P. D. : Quisiera saber cuál es el libraje de tensión.

  • @armandoamenduni2912
    @armandoamenduni2912 2 года назад

    Bel lavoro, bravo.

  • @parmindersingh-pe8fb
    @parmindersingh-pe8fb 7 месяцев назад

  • @mehmetkokduman2738
    @mehmetkokduman2738 2 года назад +1

    knk bide bi osmanlı yayı yapmayı denesene

  • @fernandovaldez1145
    @fernandovaldez1145 2 года назад +1

    Awesome master

  • @franciscoedmar1051
    @franciscoedmar1051 2 года назад

    🇧🇷👊🏹🎯🏹👊👍👍 show my friends 👏👏

  • @Monthian-rf7hq
    @Monthian-rf7hq 9 месяцев назад +1

    👍👍👍👍😃😃😍

  • @WhittleManDan
    @WhittleManDan 3 месяца назад +1

    What kind of glue did you use

  • @jarchdm
    @jarchdm Год назад

    Hi again just saw the video great work as usual I do have some questions
    1 why the pvc outside of the fibre glass I don't think it adds much to the power of the bow but it will certainly make the limbs heavier so reduce efficiency
    2 I'm really surprised it's only 40 pounds with 6mm fibre glass. My favorite bow is about 52 lbs at 31 inches (just measured it) and I made it with 4.5 mm efg. I made the tips with recurve for 27cm. It shoots quite snappy.
    3 what is the total length of the bow

    • @backyard.craftsman
      @backyard.craftsman  Год назад

      Thanks bro for the question. The PVC is only for making the limb less skinny. I just don't like skinny limb. the draw weight is lighter than intended because I tried to achieve the V shape of the Assyrian bow, so unlike the composite or horn bows, the limbs don't bend very much when I put the string on and thus store little energy, and also because the over all lenght of the bow is longer than the average horse bow. I used to think about making it shorter.

    • @jarchdm
      @jarchdm Год назад

      @@backyard.craftsman ok thx for responding, I'm an engineer so I care more about the performance of the bow than how it looks. Maybe try the green efg here in Indonesia they have a couple of different grades. The clear one that is stronger but much more difficult to split evenly if you want to bend the tips and the slightly opaque once that is easier to split. I make my bows lean and mean. Cut out everything that doesn't help performance.
      I tried making a takedown horse bow but first version was a complete flop 😁 I think maybe I'll try your method of making a metal insert and put the limb straight into that.

  • @jakeammon8280
    @jakeammon8280 Год назад +1

    Specific details subtitled would've been nice

  • @rosariocastro3776
    @rosariocastro3776 2 года назад

    What size of pvc pipe and schedule? Very nice bow!

  • @VR-F
    @VR-F 8 месяцев назад

    what string u use for tying the limb?

    • @backyard.craftsman
      @backyard.craftsman  8 месяцев назад +1

      It’s a type of nylon string

    • @rall.m
      @rall.m 8 месяцев назад +1

      how long do i wait for the siyah to be glued?​@@backyard.craftsman

    • @backyard.craftsman
      @backyard.craftsman  8 месяцев назад

      @@rall.m with Superglue. 20 to 30 minutes is enough.

  • @crazymirian4564
    @crazymirian4564 Год назад +1

    whats lenght of bow string

  • @elpitagóricochileno
    @elpitagóricochileno 4 месяца назад

    Hello!
    This is Epoxy AB glue?

  • @elpitagóricochileno
    @elpitagóricochileno 4 месяца назад +1

    What is this type of wood?

    • @backyard.craftsman
      @backyard.craftsman  4 месяца назад +1

      @@elpitagóricochileno it’s a type of tropical hardwood. Unfortunately I don’t know it’s English name.

    • @elpitagóricochileno
      @elpitagóricochileno 4 месяца назад

      @@backyard.craftsman oh ok, thanks

  • @user-kv5lq9xm8c
    @user-kv5lq9xm8c Год назад

    Do you have any written instructions anywhere?

  • @w8llyt890
    @w8llyt890 2 года назад

    what glue do you use?

  • @rosariocastro3776
    @rosariocastro3776 2 года назад

    What kind of string is that

  • @hashpipe252
    @hashpipe252 Год назад

    Has puesto las siyahs al reves...

    • @SyriaVeteran
      @SyriaVeteran 4 месяца назад

      Negative, they are definitely oriented in the correct position.

  • @Mahadevmusicgwalior
    @Mahadevmusicgwalior 2 года назад +1

    Ap terkaman sale karte ho kya hum chahiye

    • @backyard.craftsman
      @backyard.craftsman  2 года назад

      sorry brother, I made it only as a hobby not intended for sale.

  • @samitmukherjee2179
    @samitmukherjee2179 6 месяцев назад

    How should i order to you

  • @Kamleshkumar-gs3oo
    @Kamleshkumar-gs3oo Год назад

    😂😂😂😂😅😅😅😢😢🎉🎉🎉🎉❤❤❤😂😂❤❤❤😂😢😮😊😂❤❤❤😊😊😊😊😊😊😊😊😊❤❤

  • @saidnawab6299
    @saidnawab6299 Год назад

    Template please share

  • @PhongCt-u5j
    @PhongCt-u5j Год назад

    Không mạnh gì cả chỉ làm cho vui

  • @alitymuori9812
    @alitymuori9812 Год назад

    فایبرگلاس و نمیتونم تهیه کنم 😑

  • @matthewyu3531
    @matthewyu3531 2 года назад +1

    Speed ?
    Without fps, it's meaningless.

    • @theokrisna
      @theokrisna 2 года назад +1

      Chronometer is expensive

    • @matthewyu3531
      @matthewyu3531 2 года назад

      @@theokrisna
      You don't have to get one.
      Please watch the video: “Measuring Projectile Speeds - without a Chrony” on RUclips.

    • @theokrisna
      @theokrisna 2 года назад

      @@matthewyu3531 thanks for the suggestion 👍

    • @MrLee-cy1pw
      @MrLee-cy1pw 2 года назад

      All you need is a stop watch and some math

  • @colherrera370
    @colherrera370 2 года назад

    To soft

  • @ralphbelocura6208
    @ralphbelocura6208 2 месяца назад

    What glue did you use ????