Great video I was just wondering one thing. For the mass flow rate of the secondary air, why are you taking 5.5% of the total mass ? I understand the idea but I don’t really see where the 5.5 is coming from. Thanks for your help !
Hello! I have a question, how to change the concentration of hydrogen (for example from 10% to 50%), in the reaction 2H2 + O2 = 2H20, in Ansys Fluent, thank you in advance.
I have created a geometry very similar to this but with 1 large fuel inlet and due to the size difference is only a small gap between both inlets i get diffusion any help would be appreciated
Appreciate for video. So I have a question, why should make boolean comand(imprint)? What means of "Injector do not have imprint"? (If no boolean comand, what happen?) Can I get this reason?
@@shehzaibyk Thank you for answer! I understand the reason of it If you dont mind, i want to ask one more question (about application function) In command of boolean~imprint face, There are three options of preserve target body (For example, you take (No) and make some injectors' frozens again in your video) Then, Yes or Yes imprint options are same effect of yours? (I think yes)
Hello sir, I want to do combustion simulation for solid fuel, it is potassium nitrate and dextrose for my project, could you please guide me regarding the same. Thank you
Thank you so much! I've been really struggling to find a 3D combustion example. That was very helpful.
the goated tutorial
Thank you very helpful
Thank you!
Hi, thank you for your video. Can you help a model with 3 inlet and 3 different species for non premixed model?
What’s the excess air coefficient in this case?
Great example and I need to know how to model wood as a fuel in a cookstove calorific value of (15000 KJ/Kg ) ?
You can define material properties in the setup
Great video I was just wondering one thing. For the mass flow rate of the secondary air, why are you taking 5.5% of the total mass ? I understand the idea but I don’t really see where the 5.5 is coming from. Thanks for your help !
Its just random value
Hello! I have a question, how to change the concentration of hydrogen (for example from 10% to 50%), in the reaction 2H2 + O2 = 2H20, in Ansys Fluent, thank you in advance.
I have created a geometry very similar to this but with 1 large fuel inlet and due to the size difference is only a small gap between both inlets i get diffusion any help would be appreciated
Kindly send me your problem description at shehzaibyousufkhan@gmail.com
Thanks
Can you do as the fuel nozzle ? like the spray of a fuel nozzle in a combustion chambre ? Thank you
I can't make any promise. Kindly send me your problem description at shehzaibyousufkhan@hotmail.com
just a quick question, can't you simulate only a quarter of the combuster and make it symmetry? It will save 75% of the computational power.
Yes
sir what if we have a solid fuel and we want to simulate combustion by injecting the oxidizer into the solid fuel using multiple ports?
You can try it by modifying the material properties.
Appreciate for video. So I have a question, why should make boolean comand(imprint)? What means of "Injector do not have imprint"? (If no boolean comand, what happen?) Can I get this reason?
Imprint allows continuous surface to be segmented so that mesh can modify its connectivity and conform it more closely to the specified geometry.
@@shehzaibyk Thank you for answer! I understand the reason of it
If you dont mind, i want to ask one more question (about application function)
In command of boolean~imprint face,
There are three options of preserve target body (For example, you take (No) and make some injectors' frozens again in your video)
Then, Yes or Yes imprint options are same effect of yours? (I think yes)
ım trying to combustion mixture h2 and methane in the combie boiler how can help me to this study ?
You can repeat the same for H2 and Methane
Hello sir,
I want to do combustion simulation for solid fuel, it is potassium nitrate and dextrose for my project, could you please guide me regarding the same.
Thank you
each time i tried to select the pattern the whole body is selected, why?
i got it. thanks
Can I ask if we wantt to use the case for publication, how to cite it?
@howardshaw1213 Sure,
IEEE format:
[ ] S. YK, "ANSYS Fluent Tutorial N°2 | Generic Non-Premixed Combustion Chamber Modeling in Fluent," RUclips, Nov. 15, 2022. [Video]. Available: ruclips.net/video/2fdPeYTYY3I/видео.html
APA format:
Shehzaib YK. (2022, November 15). ANSYS Fluent Tutorial N°2 | Generic Non-Premixed Combustion Chamber Modeling in Fluent [Video]. RUclips. ruclips.net/video/2fdPeYTYY3I/видео.html
MLA Format:
“ANSYS Fluent Tutorial N°2 | Generic Non-Premixed Combustion Chamber Modeling in Fluent.” RUclips, uploaded by Shehzaib YK, 15 November 2022, ruclips.net/video/2fdPeYTYY3I/видео.html.
outlet boundary conditions missing i think? can u share
Pressure outlet
hello all can someone please help me to edit material for my project i want to add methane-hydrogen and i am not getting any clue
You can define in material properties
give me a tutorial on CFD simulation, 2 type fuel for coal combustion
Share the problem description