Nice design. Could save some time if you routed a small channel in the bottom of the top part so the bottom sits exactly where you need it. Doesn’t have to be more than 1/4 in. Could go 1/2 and would help lock them together to be sturdier.
Thanks! I was going to go down this route but wanted an option to put it on a raised table if I ever have to do something outdoors, so I ended up with the front mount
Not the lightest bc of all the stuff going on, but very manageable However, I do have an srt in a flight case for smaller events. This furniture comes out for the fancier and pricier events
Nice work building unit ! That cable snake makes it look more difficult than it needs to be and that looks like lots of rack mount power strips and a conditioner that could be eliminated for a power strip mounted in rack.
Wasn’t really going for something super compact, but versatile instead. My compact set up is an srt with a 1u coffin and mics inside with no mixer. I use that for smaller events. For bigger events, the 8 minutes it takes to set this up doesn’t bother me, I show up 4 hrs early I thought about castors, but we do stages at hotels often so I wanted something that can be carried. I also use the rack only for ceremonies. And the thing is almost $9k, I didn’t want to have another one just for reception. Hence why it’s not all built in And I wanted the top to be separate bc when I do outdoor events, I don’t want to put the folding stand on grass and dirty it up. In those cases, I’ll use my folding table instead
No but I am going to make one soon. In the meantime you can hit me up on instagram and I can do my best to walk you through it with pictures I took @djdholirajan
Looks great. But just a question with today technology why have all that extra power conditioning for Seems like extra weight when there are more smaller and. Wireless things. To bring now
Great question. I normally have my speakers next to me at most events, where I would plug in lights and speakers into the conditioner. This was one where I had to be off to the side so I used the rack for just mics and mixer I also use the rack for ceremonies where I use two speakers as well, and it’s easier to just run it to the conditioner With a healthy outlast I can monitor the amps being used and voltage being dropped and allowed volume if needed before a circuit trip
Actually good catch, I realized after I set everything up I forgot about the speakers. But when I have the speakers next to me (75% of the time), I plug it into the rack for power and audio. In this case I was off to the side but speakers were centered to the dancefloor so I just ran an Xlr and daisy chained
Thanks!! Much appreciated! Boom: Gator Frameworks 28" Telescoping Boom Arm with 2.5lb Counterweight; (GFW-MIC-0022) a.co/d/8L5qgNI I also added the gator quick release to this plate inside the booth for east disassembly: VIVO Universal Steel Microphone VESA Adapter Kit, Tabletop Mic Mounting Bracket with VESA 75x75mm and 100x100mm, Black, MOUNT-V00MIC a.co/d/d19hKb3
Nice work! I'm making something similar. What bag do you have for the Alto speaker? I have the same one but can't find the slip cover anywhere for purchase
Thanks! Im so happy I stumbled on the hinge, it worked perfectly YUMORE Folding Shelf Brackets, 10 Inch Heavy Duty Collapsible Shelf Bracket, Black DIY L Bracket for Workbench Folding Table Hinge, Max Load: 330lb, 2 Pack a.co/d/3tdZaMT
If this works for you great but that looks like such a faff 😅😅 and I don't get this video, the guy holding camera asks if he should speak and is told not to so as the viewer we don't get to understand any benefits of this booth at all, just looks so heavy and inconvenient, not for me if you're selling them, still don't get the point to this video ✌️👌
Sweet setup brother!
Nice design. Could save some time if you routed a small channel in the bottom of the top part so the bottom sits exactly where you need it. Doesn’t have to be more than 1/4 in. Could go 1/2 and would help lock them together to be sturdier.
Thanks! I was going to go down this route but wanted an option to put it on a raised table if I ever have to do something outdoors, so I ended up with the front mount
Hellva set up!!! The white Rev is banging!!!
Thanks man!!
@@djdholirajanYes sir my man!!!!!!!!
Subscribed to see the walkthrough of all features video!
Thank you! Yes that is coming very soon!
Beautiful....... must be heavy to transport but its beautiful.
Not the lightest bc of all the stuff going on, but very manageable
However, I do have an srt in a flight case for smaller events. This furniture comes out for the fancier and pricier events
Nice work building unit ! That cable snake makes it look more difficult than it needs to be and that looks like lots of rack mount power strips and a conditioner that could be eliminated for a power strip mounted in rack.
Lol yeah it is. I also got one of the cable backwards so it looks all tangled. Need to redo it with custom cable lengths inside of a loom
At that point it might as well be on castors and roll it in. Theres nothing compact about that. Its not like you are going to travel that in your SUV.
Wasn’t really going for something super compact, but versatile instead. My compact set up is an srt with a 1u coffin and mics inside with no mixer. I use that for smaller events. For bigger events, the 8 minutes it takes to set this up doesn’t bother me, I show up 4 hrs early
I thought about castors, but we do stages at hotels often so I wanted something that can be carried.
I also use the rack only for ceremonies. And the thing is almost $9k, I didn’t want to have another one just for reception. Hence why it’s not all built in
And I wanted the top to be separate bc when I do outdoor events, I don’t want to put the folding stand on grass and dirty it up. In those cases, I’ll use my folding table instead
Also it is 100% suv friendly. But like I said I have another set up if I’m not bringing the trailer so it doesn’t really matter to me
Do you have a breakdown of ask the material and how you built this booth? I’m interested in building one myself. Thank you in advance
No but I am going to make one soon. In the meantime you can hit me up on instagram and I can do my best to walk you through it with pictures I took @djdholirajan
Thanks for sharing. Great Job.
Thank you! Much appreciated
Clean setup!
Thank you!
Amazing setup!
Thank you!!
@@djdholirajan You're Welcome
Man I need details! Looks great.
Let me know, happy to discuss! My ig is @djdholirajan if you want to shoot me a message
Looks great. But just a question with today technology why have all that extra power conditioning for Seems like extra weight when there are more smaller and. Wireless things. To bring now
Great question. I normally have my speakers next to me at most events, where I would plug in lights and speakers into the conditioner. This was one where I had to be off to the side so I used the rack for just mics and mixer
I also use the rack for ceremonies where I use two speakers as well, and it’s easier to just run it to the conditioner
With a healthy outlast I can monitor the amps being used and voltage being dropped and allowed volume if needed before a circuit trip
Looks great. I have a similar DIY DJ booth.
Thanks 🙏
Great setup ,Where do plug in the speakers? In the rack below or from the snake box by the Rev7?
Actually good catch, I realized after I set everything up I forgot about the speakers. But when I have the speakers next to me (75% of the time), I plug it into the rack for power and audio. In this case I was off to the side but speakers were centered to the dancefloor so I just ran an Xlr and daisy chained
DOPE setup!!! Can you post a link to the mic/boom arm
stand?
Thanks!! Much appreciated!
Boom:
Gator Frameworks 28" Telescoping Boom Arm with 2.5lb Counterweight; (GFW-MIC-0022) a.co/d/8L5qgNI
I also added the gator quick release to this plate inside the booth for east disassembly:
VIVO Universal Steel Microphone VESA Adapter Kit, Tabletop Mic Mounting Bracket with VESA 75x75mm and 100x100mm, Black, MOUNT-V00MIC a.co/d/d19hKb3
Nice work! I'm making something similar. What bag do you have for the Alto speaker? I have the same one but can't find the slip cover anywhere for purchase
Thanks! It’s the Rockville 8 inch speaker tote, works well with the tx308 and the ts408
Great setup! What type of hinges are those? Could you post a link for them?
Thanks! Im so happy I stumbled on the hinge, it worked perfectly
YUMORE Folding Shelf Brackets, 10 Inch Heavy Duty Collapsible Shelf Bracket, Black DIY L Bracket for Workbench Folding Table Hinge, Max Load: 330lb, 2 Pack a.co/d/3tdZaMT
@@djdholirajan Thank you for the link!
@@mixxterdjno problem!
@@djdholirajan if you don’t mind I’m gonna reach out to you IG for some details.
@@djdholirajan If you don’t mind I’m gonna reach out to you IG for some details.
A correctly shot 16:9 video would've allowed us to see everything better but great setup nonetheless!
I should have coordinated with my camera guy better! He is a younger guy and is used to reels and insta type of media
Do you have a link for the booth?
I don’t, this is just something I made and wanted to share to other djs who may want to do something similar
If this works for you great but that looks like such a faff 😅😅 and I don't get this video, the guy holding camera asks if he should speak and is told not to so as the viewer we don't get to understand any benefits of this booth at all, just looks so heavy and inconvenient, not for me if you're selling them, still don't get the point to this video ✌️👌
Not selling the booth, just showing other diy-ers some ideas. Sorry this video pissed you off so much, maybe grab a snickers
Or A Coke & A Smile 😊