Great video but this is a very fiddly job! Got there in the end, going carefully, but took over three hours. Getting the buttons off was difficult because the glue doesn’t really soften much even with heat and you are likely to damage the finish round the edges. Refitting them is also difficult because you have to dig out enough of the glue to get them to seat properly. When you see what’s inside they seem insanely expensive at about £280. I’d try one of the cheap lookalikes at about a quarter the price. Before reassembling you should remove all dust, hair etc. and clean the metal filter underneath the filter cover. I found a water flosser worked very well for this.
I have the dreaded 3 red lights / overhating flashing when set to power level 3 and heat level 3 (level 3 + 3 only).... i tried to do some light cleaning and disassembling the base of the base + filter but still doing it. I think i'll have it serviced. been running every day for 2 years, drying the dog, family, etc.
I don't know why, but there is no adapter for EU or Asia. But the us version depends on the adapter. I think the motor is 220-240v, but it seems to be down only in us. Is it possible to use 110v in 220v if I replace the wire?
Please have a check my video Description，i attached some power cable purchase link,or you could tell me what Voltage and plug specification，i could find for you,thank you.
Great video but this is a very fiddly job! Got there in the end, going carefully, but took over three hours. Getting the buttons off was difficult because the glue doesn’t really soften much even with heat and you are likely to damage the finish round the edges. Refitting them is also difficult because you have to dig out enough of the glue to get them to seat properly. When you see what’s inside they seem insanely expensive at about £280. I’d try one of the cheap lookalikes at about a quarter the price.
Before reassembling you should remove all dust, hair etc. and clean the metal filter underneath the filter cover. I found a water flosser worked very well for this.
Best most informative and great visiblity video i have seen yet and i have searched many. Ive used this blow dryer for 5 years.
Super video! Thanks so much! I really appreciate your effort because it helped me!
I have the dreaded 3 red lights / overhating flashing when set to power level 3 and heat level 3 (level 3 + 3 only).... i tried to do some light cleaning and disassembling the base of the base + filter but still doing it. I think i'll have it serviced. been running every day for 2 years, drying the dog, family, etc.
Thank you, what are the size and name of the blue screw driver and red and white one? Please.
you need a T6 hex and a T8 hex screwdriver for this
What type screwdriver for removal of first two screws
T6
I don't know why, but there is no adapter for EU or Asia. But the us version depends on the adapter. I think the motor is 220-240v, but it seems to be down only in us. Is it possible to use 110v in 220v if I replace the wire?
have you found an answer to your question ? I have the same issue.
Can you include or list all of tools and their sizes required plz n ty
Thank you
where do you get the replacement power cord?
Please have a check my video Description，i attached some power cable purchase link,or you could tell me what Voltage and plug specification，i could find for you,thank you.
If I have 110v power cord, I can just replace it with 220v power cord and it will work, right?
Only work with machines with the same voltage
same issue here. I have US version. Do you think it will work in Europe with this plug ?
@@Jossetson didn’t test, bought ac adapter 220-110 2000va from Amazon . Works flawless
@@borodishe can you send me the link ?
@@Jossetson www.amazon.de/gp/product/B07CLYPFW1/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 here you go
Dove posso acquistare il filo
How are the 2 buttons removed/replaced ?
Hello,
You could have a check my ebay link,it has a photo of the Button Disassembly guide：www.ebay.com/itm/224457868654
What kind of glue did you use for the buttons?
Hi where can I order the replacement power cord? I bought one and it came without it
Hello, could you tell us the voltage of your hair dryer? 110V or 220V? Thank you!
Thank you so much
crap hairdryer stopped working 1 mth after 2 yr warranty, rip off product