mi raqueta tenia el transistor KSH 200 ZH 09 quemado y le puse un BD 135 quedo perfecto andando. Gracias por el vídeo. My racket has the KSH 200 ZH 09 transistor burned out and I put a BD 135 in it, it was perfect. Thanks for the video
Good job dear str , but I have a question ❓ can a mousquito bat over two years can it be repaired it was working up to recently then suddenly it stop working the only thing that still works is the two lights, oh by the way I am texting from Jamaica
Thanks, Roy I haven't really taken a look at my 2 mozzy zappers that are not working but your video gives a clear direction on where to begin. Great video thanks take care and stay safe
Hi. I don't know much... But as far as I know a multimeter in Diode mode - red probe on the base, black probe on the emitter - should give a reading above 0 (typically 150+) Same goes for red probe on base and black probe on collector. And if the probe polarities are reversed .. then the there should no reading (ie: 1 on the multimeter) U got reading both from Base to emitter and to collector. Yet u said that the transistor is bad. Can I know why ??
On touching the terminals of the DMM on the two sides of the resistor you will find te equivalent resistance across it not the actual resistance of the resistor. To find the actual resistance of the resistor use colour code method. Same goes for the diode also. It is unwise to check components like that when they are attached as a part of circuit in the PCB. But video is good.:)
Hi, my mosquito battery is ok. It show 4.2 volts through multimeter Charging light is showing, but press buttion is not showing which comes when we press d buttion for killing d mosquito, pless answer
im new on this electronical thing, it cloud over on my head on 4:44 you check your transistor and it doesnt have current on the other side and you says it is work properly and when you test on the board the transistor showing current from the both side and you said that IT IS the problem. How it is the problem? does it really work that way, anyway im watchuing your video cuz i have low voltage bug zapper lol. currently what i got is broken diode, it doesn show any living sign.
Cheap mosquito killer bats use low quality LED indicators. Their leads are made of iron, which rust and break. When this happens most people will think the bat is dead and discard it. Few will bother to repair it.
Thanks for your video, very much useful, But had a doubt, I found the same complaint in my bat, so replaced transistor, but again it damaged and same complaint exixts, what to do then? Waiting for your reply
There is no way for someone to know if it was only transistor, if it was installed properly, or anything else without inspection. So a good reply isn't possible
Dear Friend, by mistake 2 year ago I remove the last filter capacitors, now my Mosquito Bat is still working. Why? Does the power is less? Can I install a blue (small) capacitors of my charger instead?
My zapper wasn't working so I opened it and found the positive wire for the battery broken off! Problem is, I'm not sure where it should be reconnected! It seems my circuit is a bit different to yours but I expect they are all basically the same. How can I tell where the positive battery wire should go?
Hi, my mosquito battery is ok. It show 4.2 volts through multimeter Charging light is showing, but press buttion is not showing which comes when we press d buttion for killing d mosquito, pless answer
There is no need to discharge the battery, just switch it off and no current will flow through the circuit....to discharge the orange capacitors, you short (connect together) their two lead points with a screw driver..
Hello, I would like you to help me I have a question, this circuit could work for a long time if I cancel the button so that it is always on? Thanks in advance.
My head is about to explode I don’t even know if you’re speaking I caught a couple words that I sort of understand but is this crazy music on top of it.... I’ll just have to watch muted
Thank you for your very useful video, now I can find out what is the problem on my bat.
mi raqueta tenia el transistor KSH 200 ZH 09 quemado y le puse un BD 135 quedo perfecto andando. Gracias por el vídeo.
My racket has the KSH 200 ZH 09 transistor burned out and I put a BD 135 in it, it was perfect. Thanks for the video
Hola sí lo pueden transmitir en español gracias excelente video
Great tutorial!Im gonna watch this again when i get the time to repair my mosquito bat. Thank you for shar8ng brother.
thank u for sharing very informative and helpful
Good job dear str , but I have a question ❓ can a mousquito bat over two years can it be repaired it was working up to recently then suddenly it stop working the only thing that still works is the two lights, oh by the way I am texting from Jamaica
Thanks, Roy I haven't really taken a look at my 2 mozzy zappers that are not working but your video gives a clear direction on where to begin. Great video thanks take care and stay safe
Well explained.good video.informative also but text on the video covers the back ground.let the text part scroll at the bottom of video.
Hi.
I don't know much... But as far as I know a multimeter in Diode mode - red probe on the base, black probe on the emitter - should give a reading above 0 (typically 150+)
Same goes for red probe on base and black probe on collector.
And if the probe polarities are reversed .. then the there should no reading (ie: 1 on the multimeter)
U got reading both from Base to emitter and to collector.
Yet u said that the transistor is bad. Can I know why ??
The emitter should read at least 9 over the collector when the red probe is on the base...
On touching the terminals of the DMM on the two sides of the resistor you will find te equivalent resistance across it not the actual resistance of the resistor. To find the actual resistance of the resistor use colour code method. Same goes for the diode also. It is unwise to check components like that when they are attached as a part of circuit in the PCB.
But video is good.:)
Bro your 1 week late for me. I repaird my bat 1 week ago. This video would be usefully if i get it earlier 😄😄
Hi, my mosquito battery is ok. It show 4.2 volts through multimeter Charging light is showing, but press buttion is not showing which comes when we press d buttion for killing d mosquito, pless answer
@@deepaksach1980 replace the pressing switch. Your problem will be solved.
Good day sir , I really like your work God bless you.
Can I use D772Y in place of D882Y?
Do they sell that circuit board on the internet?
im new on this electronical thing, it cloud over on my head on 4:44 you check your transistor and it doesnt have current on the other side and you says it is work properly and when you test on the board the transistor showing current from the both side and you said that IT IS the problem. How it is the problem? does it really work that way, anyway im watchuing your video cuz i have low voltage bug zapper lol. currently what i got is broken diode, it doesn show any living sign.
After watching ya video I'm gonna try repairing mine! If I'm not dead will cya around 😃
I replaced the transistor d882 it worked but then after several hours there's no zap. Is there an updated transistor that can replace D882?
clean/wash up the grid first and let it really dry,measure in ohm for infinite resistant result
Cheap mosquito killer bats use low quality LED indicators. Their leads are made of iron, which rust and break. When this happens most people will think the bat is dead and discard it. Few will bother to repair it.
thanks bro! lot of help my transistor gone through...
Thanks for your video, very much useful,
But had a doubt, I found the same complaint in my bat, so replaced transistor, but again it damaged and same complaint exixts, what to do then? Waiting for your reply
There is no way for someone to know if it was only transistor, if it was installed properly, or anything else without inspection. So a good reply isn't possible
Can you please Provide the Link, to purchase the assembled board of Mosquito Zapper, Please..
You can buy it from flipkart and amazon
Dear Friend,
by mistake 2 year ago I remove the last filter capacitors, now my Mosquito Bat is still working.
Why? Does the power is less? Can I install a blue (small) capacitors of my charger instead?
Can you tell me please from where is bay this bord and what the name for it
Whats the name of that 5 black diode Sir?? I want to build a dyi fly bat swatter..
Also the name of two red candy capators..thank you.
thank you , now i could pin point the problem.
So, you have replaced working D882 transistor??.. Can we use more powerful transistor to it
By the way love your work bro. Tmi a6o tai amrao a6i 😊
thanks the transistor is the main culprit
D882 npn from left to right emitter, center electrode collector, then base
Yeah... I've fixed the my problem...good and practical tips.
My zapper wasn't working so I opened it and found the positive wire for the battery broken off! Problem is, I'm not sure where it should be reconnected! It seems my circuit is a bit different to yours but I expect they are all basically the same. How can I tell where the positive battery wire should go?
Use a magnifying glass - or take close up photos and zoom in and you WILL see the spot it separated from. Be like a CSI investigator and look closely.
You will see positive and negative sign mark on pcb board
dada which store sell the pcb board..?
This pcb is available on flipkart and amazon
Pcb board is available on flipkart and amazon
DaDa Multi Talented 🔥
Thank you for this repairing video...
How to check the capacitor whether it is working or not what should be the multimeter setting for this
Board kithar me buying...?
My bat is giving spark but the spark is very slow. What might be the problem?
Thanks dada :) ei board ta Chandi Market e kon dokane pabo jodi bolte paren tahole khub bhalo hoi :)
Jekono electronics er dokane paben
excuse me my transformer is broken can i use a 5v transformer from a cellphone charger?
Is it safe to use this WHILE it's charging? Thanks
No not at all safe
Roy, I tried many ways, changed the battery, after charging, with just one press of a button, the battery is discharged. what could be the problem
local market in Hyderabad are the circuits available. Please send your local market address.
Buy online from flipkart or amazon
Hi, my mosquito battery is ok. It show 4.2 volts through multimeter Charging light is showing, but press buttion is not showing which comes when we press d buttion for killing d mosquito, pless answer
Replace the pressing button
To discharge the battery,where are you putting two nodes in the PCV(in which two points) please tell.
There is no need to discharge the battery, just switch it off and no current will flow through the circuit....to discharge the orange capacitors, you short (connect together) their two lead points with a screw driver..
Bat is charging but not discharging.. Bottom of my bat is removable.. It comes with torch light.. What might be the problem?
Sab kuch thik thak phir ve nhi current ja raha hain net pe?
Kya prblm hain?
My transistor beap on one side and other side showing some value so is it spoil
that spark can fry electronic circuit?
What causes the transistor to get hot it test ok after removing..............
where to buy the complete circuit board from the local market? I am from Kolkata.
Go to chadni market
Buy online from flipkart or amazon
Is KE HE D9 Fe transistor equal to D882?
Where I will get the circuit board
i know the problem is that transistor but there is no any transistor from that in our country ,
what can i replace for it?
If you want you can buy new pcb board from flipkart or amazon
882,D9,965,135,139,140,880,2583,
8050,3807,2n2222. Pinout could be differnet
thanks bro! lot of help.
Glad it helped
I want to kill flies (makkhi) with my mosq. Bat. How can i modify/makemore powerful? By replacing PF Capacitor or what else. Pl. guide me.
No demostró que funcionará la raqueta y el circuito al terminar la reparación y antes de cerrarla X 😮
You are awesome! Thank you!
Hello, I would like you to help me I have a question, this circuit could work for a long time if I cancel the button so that it is always on? Thanks in advance.
How to use it too convert DC3.7v- 4.2v to DC 8.5v -9v ?
Gracias! menos basura y más reparaciones! thx from Argentina
Many thanks.
How to add flame thrower on the mosquito zapper.
Kya mein 2 N 2222 A Tragistor use kar sakte hai.kyaa
Yes.
Why thé racket not have any light in order toi catch moskito thanks
How much voltage can you out on the circuit?
It can reach 2000v
D882 ট্রানজিস্টর এর পরিবর্তে অন্য কোন ট্রানজিস্টর ব্যবহার করা যাবে কি । যদি যায় তবে সেটা কত ?
D2583,d8050,d9,1308,1309,801 all are equivalent. But its impossible to say without testing that will it work on your circuit or not
GREAT Video!
Very nice video
Great idea
Hello, I have one mosquito racket damage, how to check the board
What's the problem in that mosquito bat? Use multimeter to check
Nice bro how can I increase the output voltage .
what is the name of that circuit board??
Pcb board for mosquito bat
Awesome repair❤️
If D882 is unavailable plz tell me another transistor.
8050,2583,880,2470,3807,135,139,140,2n2222. Pinout could be different
Simply Superb Explanation.....
What should I ask the shopkeeper to give? Circuit product name please
Pcb board for mosquito bat
Thank god , you speak English.
قمت بتنزيل الفديو لكي احفظه بهاتفي لايتفيد منه كيف انزل ملف الترجمه تبعه ؟
thank you idol
Very nice thank you
What's the number of transistor?
Thanks for have learnt
Why change the transistor?
Nice information
Not producing blast sound, but mosquito kill
Bro the biggest capacitor in u r board is damaged
Check npn transistor and if it is ok then check biggest capacitor and replace the not working one. Your problem will be solved
My head is about to explode I don’t even know if you’re speaking I caught a couple words that I sort of understand but is this crazy music on top of it.... I’ll just have to watch muted
Transistor value please tell
My flashlight works guys but no electricity on the screen, how to fix guys?
20 volt inbut Resitance value. Please
Transformers how to connect when replaced
Need to buy, where
Pcb board is available on flipkart and amazon
Wow,,,,Mantap bro 👍👍👍
Circuit board kha milega koi phone no or address dege or kitna ka milega
50 - 60 Rs local electronics shop.
Buy online from flipkart or amazon
which transistor is used for mosqutio bat
D882
Useful bro.
Yeaaaa I'm just gonna buy a new bat and save myself from suicide.
Error is occured..On checking transformer in wrong way
Capacitor lagane ke baad bhi power genrate nhi ho rha hai battery full h tab bhi
Bhai my Board is working, but coming low spark ⚡️
Check npn transistor and if it is ok then check biggest capacitor and replace the not working one. Your problem will be solved
120 rs ka Naya aa jata hai Kya repair kare Kya Naya board lagaye
Hi bro whats the name of back ground music
Dark I Love You
Please say transformer value
What if the battery inside doesn't work
change the battery , even you can use old mobile battery
Local kahan se mila bhai
Buy online from flipkart or amazon
can i use bc547
No
D2583,D8050,D9,965,880,2470,
3807 are equivalent