[HOW TO][UPDATED] KWA T6 GATE TITAN INSTALL WITH REASSEMBLY
HTML-код
- Опубликовано: 18 сен 2024
- Many thanks to Calvin for letting us film the install of the Gate Titan V2 rear wired in his KWA T6 with a Maxx Trigger as well. We filmed the whole process including the reassembly too to help you guys out.
Come check it out and don't forget to like, comment and subscribe!
Pheas
#pheasairsoft #kwat6 #gatetitan #airsoftmosfet
Just FYI - These videos helped me do a couple titan and aster installs on a few rifles I have. They have lasted longer than the ones I had "professionally installed" by one of the largest airsoft dealers in the US. Thank You!
Glad I could help you with your tech work! Pheas
@@PheasAirsoft Probably reduced my stress levels too! XD
Keep up the fantastic work.
Hey Pheas! I installed my gate titan into my QRF 1 on Wednesday. Never opened a gearbox before. Went very well thanks to this video. Please keep up the good work. These videos are so useful! Thank you!
That's ace that you have used my video and done it perfectly! Thank you so much for the great feedback! Pheas
thanks a lot mate, properly done. just finished my titan 2 installation using your guide and it was butter smooth. The only problem i ran into is putting the pistol grip base plate back. It was EXTREMELY hard to push it back in for some reason. I check everything 5 or 6 times - making sure nothing is in the way, no jammed or clipped wires etc etc. Very strange... But it all works and fires nicely, so i guess that's fine.
Massive help. Greatly appreciate you taking the time to make this video and being as high quality and detail oriented/specific makes it intuitive for me to understand.
Glad it helped you out! I am doing a like install of a titan in an RN47 tonight at 8PM UTC if you want to stop by and say hello! Pheas
@@PheasAirsoft for sure! I'll keep am eye out for it tonight.
You sir are a legend did my own titan due to this video
thanks for teaching, it has been a great help.👍🏼
Nicely done!
Thanks for the help !
Glad it was helpful! Pheas
Are you familiar with the Leviathan's? I'm thinking about dropping that in instead of the Titan. As nice as the Titan is, I'm not a fan of the floaty trigger because of the optical trigger and no resistance. Looking at the gearbox shell, it looks like it will fit but I'm not certain, hoping you can shed some light.
Hi I know it’s been more then a year but just did the install of titan gate on my t6 and it’s been a smooth instal with that video, I was wondering wich motor you use at the end when you were talking about the high speed motor to get 28 round per second on full auto 😁
Hiya, it was a Kublai high speed motor from Taiwan gun, however I dont seem to be able to see them about anymore, but a general high speed motor should lift it nicely! Pheas
what exactly did you have to do to fix the full auto on semi towards the end?
Hiya. Sorry for the very late reply. For some reason I haven't been notified of it. But I recalibrated the selector in the gate control station app using usb link. It took like 2 seconds and worked a charm. Pheas
@@PheasAirsoft Thanks for the reply! Yeah the app was actually very helpful and straight forward for that part.
@@ock435 Glad it was and that you got sorted! Pheas
Does this t6 have the 2.5 or the 2.5+ gear box from kwa?
I know I’m late but I just installed my titan and finally put it all back together and when I pull the trigger there’s 4 beeps and my gun doesn’t shoot. Any help? Thanks In advance
Hello! First think I would do is plug in the usb link to your phone / computer and see what the error codes (DTC it is called) is saying and then let me know. Pheas
I have the t6 and im not sure if the gear box is 2.5 or v2 is the gate titan fit on 2.5?
Hello. They all have the same core gearbox, so they all use the gate titan version 2 rear wired. The 2.5 Vs the 3.0 is a statement of having variable fps (2.5) or recoil (3.0) you gearbox will be absolutely fine with the titan version 2 rear wired. Pheas
very nice bud
Is there any other options for a mosfet for the t6 like perun etc. thanks
Hello, optical based it's just the Titan that fits and works, however any "wired" in MOSFET like the ab++ from perun, warfet or merf from gate would be absolutely fine. Pheas
I’m new to airsoft so don’t hate me here, but shouldn’t the gear makes contact with the piston be at a 90 degree angle for a better angle of engagement?
Hello. In an ideal world, yes the first tooth of the sector gear should contact as flat as possible (not quite 90 degrees are the teeth are angled) for longer lasting pistons, but not 100% essential. The worse the engagement angle the more wear it will put on the teeth particularly of the piston, but they will still continue to work. Hope that helps. Pheas
@@PheasAirsoft that’s definitely helpful. Thank you for the great video it saved me during a takedown that was taking me 5 hrs to do. It was my first time taking an airsoft gun apart, it was very educational.
What Gate Titans fit in a T6? im looking to get one and i have zero knowledge on it thanks
Hello, you need need the V2 rear wired (your choice of basic, advance or expert) Pheas
Having trouble with the pin next to the selector switch not coming out?
All good finally got it out. Man that was a pain in the butt
@@Kydahe They are a tough one to punch through, but they get a bit easier after a couple of insertions and punch outs. Glad you got it sorted! Pheas
How did you remove the pin
great video, what motor are you using?
Good morning. In this build it had the standard Kwa high torque motor. Pheas
@@PheasAirsoft thanks
Man I’m super late but do you think you can add a link to where I can purchase this mosfit? Thank you for the video I have a ronin t6 coming in the mail soon
www.bztactical.co.uk/gate-titan-v2-basic-module-rear-wired There you go, although I got / generally get the advanced version instead as you get the slighly better software on the mosfet and the USB link to configure it. Here is the link for that one toowww.bztactical.co.uk/gate-titan-v2-advanced-set-rear-wired Pheas
@@PheasAirsoft thank you so much!! I highly appreciate it
How long did it take you to get it all done?
From start to finish (when I'm not fillming it) it takes about an hour, maybe just over. That's to make sure it's all operating, cleaned up properly and configured at the end. Pheas
same procedure with the qrf mod 1?
Hello! Yes it is. Pheas
@@PheasAirsoft thank you.
Bruh this got age restricted so sad :(
How did this get age restricted ?? Its not a real gun
I cant get the titan screw into the hole so save the life of me. It literally is not threaded at all.
No its not and its a right pain. I find that If I push down hard as screwing then the threads gain purchase and screw in. I sometimes just thread it without the titan in and then remove it and fit the titan back in the geabox. Hope that helps. Pheas
@@PheasAirsoft thanks so much for the advice. I hit up gate and they actually recommended me to use the stock screw that screwed the trigger assembly down and that somehow managed to start threading in. Thanks for all the helpful vids, I was actually able to install it myself despite not having opened a single gearbox ever.🙏🙏
@@ock435 Thats a massive compliment for me. That you have not done this sort of thing before and used my video and done it sucessfully makes me really please! Glad it helped you out! Pheas
13:43 I love that. Do you love me? 😍💋 💝💖❤️
bruh