HobbyEagle A3Super3 Advanced Fixed Wing Stabiliser- Full Setup
HTML-код
- Опубликовано: 28 авг 2024
- Eagle A3-L V2: bit.ly/EagleA3L
Eagle A3 Pro6: bit.ly/EagleA3Pro6
Eagle A3 Super3: bit.ly/EagleA3S...
PLEASE NOTE: I'm powering the stabiliser from a UBEC when fitting it to the model so that the ESC isn't connected and powered and there is no chance of the motor starting. For safety always remove the prop if you're planning to plug in the battery on the bench.
You can see more R/C related videos on the channel - / painless360
Please consider subscribing and supporting the channel by visiting / painless360
You can follow us on Twitter too - / painless360 and Instagram as well.
Thanks for watching, please LIKE and SUBSCRIBE.
Happy flying!
One extra thing worth noting is, this stabiliser is much quicker to respond than most regular 150+ms servo's, so I would recommend aiming for very fast servo response
of around
Great tips, thanks for sharing! :D
I have had this thing for months now and its good to see someone do a video on it. Thanks!
Iv had this for an year now and I'm so glad you did a video on it. Thanks.
As usual Lee, excellent review. This seems like a really nice product for fixed wing longer range FPV!
Really interesting stabilizer, Lee! And much easier to setup as well! 😃
I have 2. I have noticed that if I put the plane into an unusual attitude, then switch it from "off" to "auto-level" it will dive at ground in a turning motion.
It works correctly if switch is on before putting it in an unusual attitude..
Great video and I just like to say this gyro works great, I have it in my Freewing 64mm F-18 and it flies awesome with it. Still testing the differant modes (trainer, and auto level). I did notice the 60' default angle for the trainer seemed to shallow. I am going to test it to more effect soon. Keep up the great vids.
masha Allah a nice alternative, thank you brother
This video was extremely helpful. Thank you.
Looks far easier to set up than the FrSky S6R,Down side being similar price but the S6R is an RX as well.
Great detailed video
can you give me the link for the firmware upgrade, when I went to HobbyEagle I couldn't find it. cheers.
No idea, maybe via the configurator app? I use INAV for my planes now. Best of luck!
@@Painless360 will you still be able to answer my other 2 questions, If you can still remember how to use the A3Super3, cheers.
wow that's great lesson.
Great video Lee ...
just put one in a plane that has 2 ailerons and flaps(y lead), which two outputs from the A3Super3 would I use , or would the second aileron servo plug into A2 and the flap servo lead plug into my receiver, (using futaba s-Bus)
Nice explanation. Thanks.
The usb do power it
At least I was able to find out that this device can handle differential aileron on two servos if receiver has enough channels. Installation and proper setup is really not simple/painless for a low stick time flier wanting stabilization, IMHO.
A darn sight less complicated than a Arduplane or INAV setup though ;) The more basic versions are easier to setup. Happy flying!
Again, super useful. I've been considering a gyro receiver as I'm new to flxed wing. Do you recommend the newer version of this (version 4) or another brand? I am hesitant to spend the money on Spektrum receivers as they're overpriced.
I've not used the newer versions but was impressed by this version... Happy flying
i so could use your help ! I have an Montion F-16 C 70mm i need help with the wring blue box gyro and receiver .. Please help ! don't have no idea that wire goes were and from what first .
Love your unbiased reviews. Stabilisers for larger trainer planes for beginners. Planes like the FMS Ranger 1800 and the Beaver 2000 - in your opinion KOPILOT or DETRUM Z3 or HobbyEagle A3 Sper 3/4? Thanks Lee.
It depends on on what is important to you. The HobbyEagle stuff is makes a lot model fly beautifully but a Kopilot gives you RTH...
@@Painless360 That's a very good point you make indeed. I guess so does the Detrum Z3. Okay, is the Kopilot capable enough for a slightly big plane like a FMS Beaver v2 2000MM? Works real well with my FMS Super EZ4. Thanks again.
I have a craft that uses differential thrust instead of a rudder. But it doesn't look like it has a mode for that. But I wonder if it can be setup for it anyway.
I guess I would have to use 2 ail, 2 ele and 1 Rud, but put single elevator on rud, and use the dual elevators as the trust? But then how would I control the amount of thrust... Hum... I guess this wouldn't work unless I use a rudder.
I don't see how that would work either. You can setup more advanced mixes in things like INAV... Best of luck
I put this in my Skysurfer and it works a treat. I would like to put one in my HD Wing but can’t find how to set it up. Could you do a video on it please?
There isn't any difference. SBUS is SBUS.. Just watch the channel order. Best of luck!
So to use the ESC you can't (as you said) use a tiny S-BUS only RX because you still need PWM for the ESC ?????
Yep.
i have one question is it possible to use sbus with the gyro and use aux 7-8 on the reciver for my landing gear and flaps or will just have to use the normal config
Should be if those two channels are not used to configure anything on the stabiliser... Best of luck
As of 2021 for a beginner what's better.... ZOHD Kopliot Or one of these stabilisers? You have used both of them what would you suggest, irrespective of their cost??
I'd suggest a really stable 'plane perfect for a new pilot to learn with (AXN. Boxler, Drift etc.) and no stabiliser. But the KoPilot provides the RTH in case of a problem as well as being pretty easy to setup..
Will I need to do the 'Zadig' thing etc to get this to hook up to my PC..?
Where can I find the wifi module? Looked every where, i can use my laptop but the wifi would be nice 👌
This looks like a very nice affordable stabilizer. How do you think it compares to uses a iNAV with a more common F4 flight controller? To me the real downside is it requires a Windows PC to set it up which is a non starter for me as I am a MAC user.
Also what is the tablet you are using to setup the device?
As with an awful lot of things, I have a video about that. ruclips.net/video/YAfNC55Udu0/видео.html :)
can you do a review of the 3 in 1 hhd drone
Excuse me, but aliexpress sells them to for half the price. Why is motionrc asking 80euro for card and unit and aliexpress only 36euro
has anyone ever tried to use the lock mode when hand launching?
Sir what the common ESC ampere you used on some of your RC PLANE..
You choose an ESC with 20% more current than the motor will pull. So if the motor is rated at 10 amps, use a 12 amp ESC. See my RC basics series... Best of luck
@@Painless360 thank you sir..
Many thanks for this great video! Do you know if the A3 Super 3 is compatible with the Spektrum SRXL2 Serial Data Protocol? In other words, can I use a Spektrum Satellite Receiver SPM4650 with a single serial data cable (SRXL2 Protocol)?
I don't know. Best of luck
Hi if i has the plane already Firtflight and trim for straight flying , for now i need to replace gyro the Quetion is i need to keep trim? Or reset model? Thank you.
All of the steps I use to get a stabiliser or flight controller working well are covered in the videos for it. Just follow along and you should be great! Best of luck!
Can anyone honestly answer if the heading hold is as good as the EagleTree Guardian?
Great video, so what modes would you pick that is equivalent to safe select, on my 3 position switch , I would use trainer, auto level, and then off? I using a 4 channel spectrum receiver, the plane has no functional rudder, so the 4th channel well have to be my data line, how do you make that 4 channel work on a 3 position switch.........
You can set it to be what you want. I like one mode to be stabilise and one to be 'manual' here.. Happy flying!
J’utilise le modèle *A3 Super* , mais celui-là me parait plus sérieux et il me plait. merci pour vos conseils...
Je vous en prie. Merci pour le commentaire. Bon vol!
Can i connect flysky receiver by ppm?
I imagine this gyro will work on Helis?
I doubt it, it isn't designed for that. If it works, then please let me know.
So what if I've installed it and got it working pc side, but haven't got power to the a3 when it's powered with the battery? Everything works if it's powered via usb. Just not when I have it and the rx on battery.
Then the 5v that you normally get from the ESC isn't there. You'll need to have 5v inside the model to power it. What troubleshooting have you tried?
Do you know how to inform me on the basic gain and recommend what percentage for the basic gain? to avoid resonance effect on the ailerons
Depends on the model. I'd try half and see how it works and tune from there.. Best of luck!
@@Painless360 thank you
Hi Mr Painless 360 I have a bad problem! I don,t know how to get the 3 position switch from my IX12 transmitter to work in the gyro software! Any help would be apreciated. Thank You Sir.
If that is an OpenTX powered radio check out the OpenTX Mixing School for how to add a switch to an output easily.. Best of luck!
Thank you
On every plane it works perfect....on my fw190 flightline the trainer or auto level mode is not working perfect. I can not move the aileron,ruder,elevator smothly, they shiver if i move my sticks.....only in the trainer or autolevel mode. In normal or off mode it works perfect....whats the reason for that? In my other planes there was no problem.....
If you are using an frsky sbus receiver and it is bound as sbus how does the throttle work? Will it still work as per normal ie as if the receiver was bound as non sbus or is there something else you need to do. ??
All the steps I figured out (along with the manual) are in this video. I've not used this since. Best of luck!
The ESC plugs directly in to the Receiver. Whatever channel that you have the throttle set up on. I'm using a FrSky XR8 receiver. Channel 3. AETR.
Purchased this gyro after seeing this great vid. Unit reset itself in flight today. When on the ground if I tap the gyro it resets itself. I'm assuming this isn't normal??
Sounds like a loose connection to me, I'd let the place know that you got it from in case it needs for exchanging.
@@Painless360 thanks. I've tested further on the bench and when I reduce gain the brownout/reset does not happen so I'm thinking maybe a power issue from the bec ??. Purchased from bangood so wont be returning it lol. Thanks for your reply
Wondering if there is a way to get all 6 modes using 2 switches on the stock Taranis X9D+?
Yep - check out the OpenTX mix videos where I do just that! :D
Can the a3 super 4 work with at10ii without elrs or any extra stuff
You just need a basic radio and SBUS... Happy flying
@@Painless360 do you have any cheap tips to increase fpv signal
I'm new to the idea of putting a camera on an rc plane
What can I do to increase the range of my basic fpv setup
Better antennas, more power and more sensitive receivers are all part of it. Using cheaper stuff can result in limited range.
Antenna alignment if not using circ.polarised antennas, makes a big difference too. I have videos about if in the Antenna Lab series on the channel..
Best of luck!
ESTOU COM DIFICULDADE DE INSTALAR O SOFTWARE...
Você está fazendo uma pergunta ou afirmando um fato? Se precisar de ajuda, diga-me a mensagem de erro exata e a solução de problemas que você já tentou ...
When I try auto-level it will level but one wing dips down,
and sometimes when it levels it does so inverted.. what is wrong ?
Probably a setting you've got wrong. What troubleshooting have you tried?
@@Painless360 check settings and all lights appear to be correct color for the settings I want. Ran 4 flights and results were the same. The gyro works but the self level has problems. I think the calibration must be good or else the gyro would not work properly. I did some searching on RC forum and they had a thread but I did not see this problem addressed. Motion Rc has a reference base but I did not see this problem mentioned.
I'd check level calibration as a starter.. Everything I do to get them working here is in the video.. best of luck!
'WiFi Dongle'
What a world!
What is the differences old one a3 super 2
No idea. I've been played with these since the videos. Best of luck
@@Painless360 thank you and trainer mode like safe mode iş there any limitation o
Great stuff !
...can anyone give me any tips on how to get it to interface with my PC...?
All I knew is in the video... I guess you're having an issue? If so, asking for help on the exact error/issue you're having can get you more helpful suggestions.. best of luck
Hi I liked and subbed also im from mrs schofields class (6s)