GrandMA3 Network Tutorial with OnPc, Processing Unit, 2K Node and I/O Node.

In this GrandMA3 Tutorial I will show you how you can connect your GrandMA3 to a computer network, to get the advantage of extending the capability of your console.
We will connect 4 different items to our GrandMA3 light:
1. GrandMA3 OnPC
2. GrandMA3 Processing Unit
3. GrandMA3 2 Port 2K Node
4. GrandMA3 Input/Output Node
To be able to connect everything to our GrandMA3 session, we need to be in full control of our network, and we need to know exactly what IP Address each GrandMA3 unit is using.
When the IP addresses is setup correctly, when can invite alle the stations into our GrandMA3 session, and start to enjoy our larger capability for running larger shows.
0:00 GrandMA3 network introduction
1:29 Make you GrandMA3 network plan (Important)
3:02 Set the correct IP address for you GrandMA3 console
3:40 A word about AURA XIP from our sponsor
5:50 Connect GrandMA3 Light to your network
6:27 What is a GrandMA3 session
7:36 GrandMA3 Session priority (Session priority)
9:25 Connect GrandMA3 Console to your session
10:19 Connect GrandMA3 Output/Network Node to session
12:28 Connect GrandMA3 Processing Unit to session
12:50 Change IP Address on GrandMA3 Processing Unit
14:00 Invite GrandMA3 Processing unit to session
15:25 Change GrandMA3 DMX Output configuration
16:00 Connect GrandMA3 IO Node to Session
-----------------------------------------------
Learn more about the Martin MAC AURA XIP:
www.martin.com/en/products/ma...
-----------------------------------------------
Join our GrandMA3 DISCORD Server:
/ discord
GrandMA3 Beginner Online School email list:
mailchi.mp/afffb3b9c40f/event...
-----------------------------------------------
Event Lightings AFFILIATE links to GrandMA3 equipment:
DISCLAIMER: We have affiliate status on the link below.
That means that you pay the same is you would otherwise, but we might receive a small commission on the sale.
We have our own landing page, where you can see all the GrandMA3 3 products we offer thru our affiliate program in this link:
thmn.to/thocf/yq2qqs3y08
-----------------------------------------------
#grandma3 #GrandMA3beginner #learngrandma3 #Grandma3sequence #grandma3tutorial #grandma3onpc #grandma3programming #GrandMA3Executer #Stagelighting

[@J-Gx]

I like that the sponsor is themed to the channel! Keep up the nice work

[@SkyMusic-ys5nv]

Amazing. Thank you. It comes in handy when some things are forgotten

[@lightdesignerharrysingh3676]

WONDERFULL VIDEO, THANK YOU SIR ❤

[@thenateman6969]

Once again, I have questions and you deliver the answers!
Thank you Martin for supporting!

[@elmarbernd2568]

Exactly the video i needed right now...! Thank you! 👍

[@hardwatergroup]

You always find the right topic for a tutorial right when I need it 😊

[@janheidrich5453]

Super cool. Top notch content easy to understand with dope looking video feed! I really like the uprade your video studio got! Very nice!

[@mquadrat4995]

hey, great video
is it possible to connect an no name ARTNET controller to the MA Network ? Or does it just work withe the MA Nodes ?

[@PixelPlayslLP]

i use a Fritzbox as a Router to Secure the Data Connection between the Stations becasue the packages are routed Correctly to Coresponding Stations and you can Leave the IP Adressing to the DHCP
just an ide

[@dhgtechnik6701]

Where did you find the Martin Mac Aura XIP for patching in grandMA3? I can only find the Mac Aura and the Mac Aura XB. They seem to have different DMX-channels ...

[@maxwolk4647]

Love your videos. Thank you :) Maybe you can make a video about redundancy and failsafes one day. It's something I think a lot about after I had a crash of the MA Software during a show. Fortunately it just matched the end of a song and the ArtNet node held the values but it was a quick shock moment. Never had MA crash on me before. So I think a lot about redundancy regarding the session itself (console crash) but also about random network issues (e.g. ArtNet fail)...

[@Event-Lighting]

Hi Max. Glad you like the videos. 😀 Yes that sounds like a great idea for a video. I don’t know exactly when I would be able to make that one - but I will definitely consider how it could be structured 😀

[@AkashCA]

+1 for this topic. Always wondered how to setup fail safes in case the console crashes. Looking forward to a video on it soon.

[@jayja45]

Out of pure curiosity, does a USB keyboard work with the nodes? It’d be very convenient for typing in the IP if it did, but I don’t have access to a node to test it out on.

[@tnikiforov]

"Welcome to the event-lighting channel, where we only talk about one brand of consoles all day every day"