I guess he wanted to show a way to do it without using tools a lot of people don't have. And you'd need to do multiple passes with a router taking off small amounts at a time.
Though what you made already appears to be strong enough, put 2 coats of epoxy-resin on the plywood shelves, and you hang a pick-up truck a single shelf. 🤣
I saved this one for a future build, NICE, very nice, but the screws/bolts holding it into the wall seem to be a little light. For the load you show they are fine, but if you load the shelves up as most of us will, they might not be enough. Showing a few alternatives might be a good idea for you to explore .....
Might be more for who is going to build a floating system like this. They could take the time to do load tests to find out when the screws pull out of the wall. If someone knows how many in^2 and the lb/in^2, then they could test for 150% of the max load. If a lot of weight is going to be placed on the shelves, then will the shelves themselves need support bracing like a 1/2 x 2 x length so the shelves won't buckle in the middle? Both crosswise and front to back. If I ever have a shop where I'll want wall mounted storage space, I'll take the time to find out what I need to do. Over time wood sags. Why I mentioned support for underneath the shelf.
@@free-energy-systems Yes, it's certainly a valid point. I think when I build mine I'll actually extend the posts to the floor to act as a "foot" and carry a lot of weight as well.
Good craftsmanship but too much for what these shelves are being used for. They will not support heavy auto parts etc.. Less materials with less detail equal the same purpose and looks.
Perfektná a pevná polica 👍 do dielne a komory super nápad 👏 myslím že veľa tvorivých ľudí nadchne váš tvorivý nápad 😉 ďakujem za inšpiráciu a posielam pozdrav zo Slovenska 🇸🇰
Better add some bracing to the shelves before something comes down. Its just a matter of time. I see the bending now, as build, by now it will be worse, no question. Better reinforce in both directions!
Прочность так себе. Материала много истратил а прочность низкая. Уголки стоило сделать больше и из фанеры, продольную часть так-же из фанеры перпендикулярно стене.
Great work as usual! Can't believe how much wood you have on hand! Just one thing I assume that there is nothing important behind that door you covered up? Mother in laws room perhaps?
Nice! Quality workmanship. Not full floating, but good use of cantilever as floating does. Bit of space lost with the 4x4 to get the notch factor. It's always a trade off!
how can you call its a floating shelves when there's a wood bracket.... ..... flooting shelves means there no open or lets say a support ti carry a shelve it hidden.....
![[Woodworking] 2020, Making A Bookshelf With Drawers and Raised Panel Doors](http://i.ytimg.com/vi/liEWQAX5M4Y/mqdefault.jpg)
![[Woodworking] 2020, Making A Bookshelf With Drawers and Raised Panel Doors](/img/tr.png)
![🔥 Industrial Style SHELF 👉 How to create it without WELDING 🔴 [AliExpress 11.11]](http://i.ytimg.com/vi/_KZYJ3yNWMo/mqdefault.jpg)
![building a wall and a shelf on the wall with plywood & 2x4 [woodworking]](http://i.ytimg.com/vi/nBC9Ix1cCPw/mqdefault.jpg)
4:20 those screws seems to be waaay to short. Hope that won't become an issue in the future :)
Такие опоры полок впервые вижу. Удивила жёсткость, ну или вес мастера птичий. Недостаток - просвет между стеной.
можно сварить из 2-х металлических пластин г образную опору и усилить.
햐~~~
짱짱
선반을 저런식으로 ...
견고함이 돋보이는... 구~~ㅅ ~~~
작업실이 점점 정리되어가는 ..
알찬 채움으로 ...
장마두 끝나구 폭염이 전해지는 ... 무더위도 잘이겨 내시길
벽에 재질이 콘크리트라 어려움없이 할수있는 작업같네요. 조립식 판넬이나 석고보드위에는 까다로운 작업을 해야하거든요. 작업실 벽이 대체로 콘크리트인게 마음에 드네요.
와 팀장님 깔끔하니 야무지내요 멋진 솜씨 잘보고 갑니다 대단하내요^^
Thank you from vietnam!
12초부터 쉽지가 않다..
1:54 Wouldn't be easier to make that cut using a manual router?? ... Nice work though 👏
I guess he wanted to show a way to do it without using tools a lot of people don't have. And you'd need to do multiple passes with a router taking off small amounts at a time.
where's the floating part? Isn't a floating shelf just suppose to appear floating off the wall and not anchored by vertical supports?
This got me confused as well
What is the name of this soundtrack
Just curious
When making the grooves, why did you not use a router?
You wouldn't have to chisel out the leftover.
Don't you need the door in the back? 🙂
How about the door blocking?
Nice work I think this plywood will bend and twist
Really awesome. I'm a beginner so I need to make some without all these tools
Se mira genial me gustaria hacer uno parecido
Why no cut from behind to make it more strong and not have space
Though what you made already appears to be strong enough, put 2 coats of epoxy-resin on the plywood shelves, and you hang a pick-up truck a single shelf. 🤣
Excellent Video. Good Work & Idea.
I saved this one for a future build, NICE, very nice, but the screws/bolts holding it into the wall seem to be a little light. For the load you show they are fine, but if you load the shelves up as most of us will, they might not be enough. Showing a few alternatives might be a good idea for you to explore .....
Might be more for who is going to build a floating system like this. They could take the time to do load tests to find out when the screws pull out of the wall. If someone knows how many in^2 and the lb/in^2, then they could test for 150% of the max load. If a lot of weight is going to be placed on the shelves, then will the shelves themselves need support bracing like a 1/2 x 2 x length so the shelves won't buckle in the middle? Both crosswise and front to back. If I ever have a shop where I'll want wall mounted storage space, I'll take the time to find out what I need to do. Over time wood sags. Why I mentioned support for underneath the shelf.
@@free-energy-systems Yes, it's certainly a valid point. I think when I build mine I'll actually extend the posts to the floor to act as a "foot" and carry a lot of weight as well.
Ingenious idea, excellent execution and beautiful results. Thank you for sharing.
Уголки наверно надо было волокнами перпендикулярно к стойке делать. А так со временем скорее всего отколются кончики
Why do you call them floating shelves? They are not, the vertical and triangle supports are in full view.
집에 홈바 선반으로 넣구싶넹...
Good craftsmanship but too much for what these shelves are being used for. They will not support heavy auto parts etc.. Less materials with less detail equal the same purpose and looks.
Perfektná a pevná polica 👍 do dielne a komory super nápad 👏 myslím že veľa tvorivých ľudí nadchne váš tvorivý nápad 😉 ďakujem za inšpiráciu a posielam pozdrav zo Slovenska 🇸🇰
Better add some bracing to the shelves before something comes down. Its just a matter of time. I see the bending now, as build, by now it will be worse, no question. Better reinforce in both directions!
какая глубина полок? how deep are the shelves?
Думаю сантиметров 30...
good day sir can i see the full picture of this circular saw guide at 5:24? thank you sir
Прочность так себе. Материала много истратил а прочность низкая. Уголки стоило сделать больше и из фанеры, продольную часть так-же из фанеры перпендикулярно стене.
SAFETY WARNING: DO NOT put your hand on the table behind a skillsaw. If they kickback (Which they do) you can really mess up that hand.
Great design mate. Love the simple visual learning in your videos so good.
How do you calculate the strength and how much material you need for the brackets? Do you run a simulation in cad/fusion 360?
I just calculated it by feeling =)
Listen.As someone who work in environment safety im strongly suggest you to wear filter mask. Later you will start regret if you dont wear mask now
Nice🙏 Thanks for sharing this super cool video🙏🙏🇩🇰
개 전다
Всякая мелочь будет падать вниз, в щель между полкой и стеной. Проверено.
beauty
Excelent, I was looking for this kind of stuff
Is this the stanley FME721-QS? I see you swapped for the newer Bosch model, but for home use the stanley is good?
Stanley is enough. Bosch is too expensive =)
Top
I hope you’re not going to need access to that door at top of metal rungs
Great work as usual! Can't believe how much wood you have on hand! Just one thing I assume that there is nothing important behind that door you covered up? Mother in laws room perhaps?
디자인이 살아있는 깔끔하고 세련된 작업
오늘도 행복하게 영상 잘 보고갑니다
건강관리 잘 하시구여
항상 감사드립니다 👍🥰🍁
감사합니다 ^^
Too bright videos cant see nothing
혹시 구조재 사이즈랑 이름 선반 두께랑 재질좀 알수있을까요?
영상올라온지 5일이나 됐는데 장염걸려 지금까지 못보고있었다니... 여름음식 조심하세요
這種設計快速簡便，但是板材支撐性不夠，日後容易因為承重與受潮而變形，就沒那麼漂亮了。
Impresionante quedó muy bien, que habilad que tienes amigo , 👏👏👏👍👍👍🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷
quelle est la taille de chevron ??? = what is the chevron size ???
Не проще ли изначально сделать всю разметку, а затем пилить и склеивать.
Nice! Quality workmanship. Not full floating, but good use of cantilever as floating does. Bit of space lost with the 4x4 to get the notch factor. It's always a trade off!
Muito bom Parabéns nota 10
너무예쁘네요~
기둥,선반 목재종류,사이즈알수잇을까요?
4*4 구조목, 15t 합판 사용했어요 ~
Nota 10
,
круто 🤟
Thank you for sharing
Love will win, fear will not - Love fear 💖 than Love will always win 🙏
앗! 1번댓글을 놓쳤군! 넓은 선반이 작업이 많아질수록 알차게 채워지겠지요? 더운여름 항상 건강 챙기시길!
Продолжаем улучшать рабочее пространство. Теперь есть куда положить разные вещи по мастерской.
ㅋㅋㅋㅋㅋㅋㅌ
Со временем это так и происходит.
Excellent I'll certainly make it for my garage thank you
본드를 두가지섞어쓰시는데
어떤건가요??
Gostaria de saber qual a espessura e metragem da madeira que fica na parede
It looks like you have your own lumber yard with all of that lumber!!
Excelent idea and best job. I´ll copy you ¡¡¡¡
김팀장님 영상
외국 목공 사이트 우연이 보다가 김팀장님 영상보고 되게 반갑습니다. 역시 외국에서도 통하는 군아 ~~~하고요
이번 영상은 꼭 만들어 보고싶네요.
애들방에 책꽂이 만들어 주고 싶었는데~~
좋은 아이디어 감사합니다 ^^
코난님 안녕하세요~ 퀀텀에서 보셨어요? 한번 허락했더니 이제 말도 없이 퍼가나보네요 ㅋㅋㅋ
오늘도 댓글 고맙습니다 ^^
SHOW, MUITO PRATICA E RAPIDO DE FAZER
awesome build! 6:51 is it just me or is that lower support loose when your bouncing on it?
Good ideas. I like it.
hi Dekay nice job very useful
원래 각도절단기로 자를때 왔다갔다 하면서 자르는건가요? 아니면 각자 스타일인건가요?
마찰을 줄이려고 조금씩 왔다갔다 합니다. 그냥 하는분들도 있긴 해요
Lindas,gostei muito da idéia de suportes das prateleiras, parabéns!
I learned so much today, thanks
저기 지하 비상문 아니에요? 비상문이라면 걱정되네요.
네 비상문 맞습니다. 영상 게시 후 오른 쪽 부분은 철거하고 문짝 녹슨 부분도 보수해서 원상태로 사용 중이에요~ 걱정 해주셔서 고맙습니다 ^^
Not really floating shelves.
Genial buenisima idea
а зачем он полками проход к двери закрыл?
Excelente proyecto!!! Muy útil.. gracias por compartirlo.. Saludos 🙋🇦🇷... Cuidate
You make it look so easy
Mantapp👍👍👍
how can you call its a floating shelves when there's a wood bracket.... ..... flooting shelves means there no open or lets say a support ti carry a shelve it hidden.....
Very nice! Great work, and thanks for sharing.
Nice build. Looks like your next build should be a step stool instead of using a chair. Look forward to the next build video!
That was excellent .
Thank u
really nice made. Great video!
عاشت ايدك على عمل 👍👍👍👍
Genial amigo....saludos desde Chile....
Amei tô abrindo uma loja e gostaria de fazer esse modelo de prateleira, mais preciso da metragem das madeiras,desde já obrigada
OMG you are SO CLEVER!!! Very inspiring indeed, especially for a beginner, thank you!
깔끔한 선반입니다~~
역시 믿고봅니다 김팀장님!!👍🏻👍🏻👍🏻👍🏻👍🏻
que madeira leve é essa ?
Toooooooooooo bright video
What wood is that?
공방은 가능하지만 현장투입은 안대요^^
but where does the door lead to?
theyll sag over time
Привет. Я бы ещё сделал упоры на края.
Hi 👋 friend I'm your fan from Morocco can you tell me about circular saw, between Milwaukee and dewalt y're been used Wich one efficient thanks
Demais! 👋👋
Super
Tenes my respeto amigo 👍👍👏👏 excelente tu trabajo, saludos desde Curitiba PR 🇧🇷👍🤜🤛👍