If you want to buy this complete project (🔥Rs: 3399🔥), then please send an email to connect.techstudycell@gmail.com with your address. (Including pre-programmed ESP32, DHT11 sensor, IR receiver, 1 selector Switch, IR remote)
Hello this is monojit . I am using the esprainmaker app but its not reliable the signal just gets disconnected frequently and esp32 is also facing some problem. Can this same programme be done in adrino cloud iot with fan speed control. As before you have made only switching with adrinocloud can i also add fan speed control in adrino cloud please make a video based on adrino cloud with fan speed control
Dear, Happy Diwali. At last I succeed. Earlier I have done mistake now rectified. But in Google App, Fan speed can't control neither through app nor voice commands but through Alexa all things are happening through app as well as voice command. Really beauty of Home Automation. If possible, please try for Google also so that fan speed can be controlled as Alexa. Thank you very much to share your knowledge.
Good Morning Dear I really like your video they are excellent and very didactic and functional. Congratulations. Please, could you make another video teaching how to use the thermostat function in Rainmaker With DS18B20 or and also with DHT22/11 I thank you in advance
Hi, I have a question regarding ESP 32. Rainmaker turns on/off the lights but if we want to design different colors? or designs ,what else do we need ? example in the picture in an SPI mode serial peripheral mode to make the color & design.
Hello sir I am from India. I watch all your videos. I wanted to know a solution from you. That is, if you create a home automation system with ESP Rainmaker, you can use five appliances and one fan, and you can also make the system controllable with push buttons. Please make a video about it I am waiting for you. ❤️❤️
Hello this is monojit . I am using the esprainmaker app but its not reliable the signal just gets disconnected frequently and esp32 is also facing some problem. Can this same programme be done in adrino cloud iot with fan speed control. As before you have made only switching with adrinocloud can i also add fan speed control in adrino cloud please make a video based on adrino cloud with fan speed control
Your work is very good and helpful. I am facing a problem in compiling this code. "Error compiling for board ESP32 Dev Module. ". I have successfully compiled your code for ESP Rainmaker 8 channel module with preference library. The difference is only of DHT sensor. I have also added this library. If you got me, please explain. Thanking you.
When i turn on or off the fan all system getting restarted and wifi was disconnected and then connecting to wifi ,the fan relays are stationary ,no any changes ,please help me to solve this problem
I have this project with complete documentation. Features are 1. Door lock and unlock through fingerprint. 2. Water pump control system 3. Pir motion with lighting 4. Gas detection and exhaust system. 5. All status are shown on blynk iot app
Bro... I have a small idea... If that is possible that would make this project even more useful.... Can you add IR transmitter code so that we can control IR devices using voice commands or ESP Rainmaker app? Please do reply about this idea... Is it worth it?
@@TechStudyCell you always do same project with different type of method and version and i love it but can u do different so everybody likes GAS LPG FIRE sensor very important for household To avoid cylinder blast
Brother, Thanks for your videos. WIFI DOES NOT CONNECT BACK IF router is restarted. Also Scheduling works only first time the board is configured. After that scheduling does not work once ESP32 is restarted After power outage.
Wifi connection issue is solved by restoring esp32 to factory settings and then using it again. But scheduling in Rainmaker app is not working. But scheduling in Alexa app is working fine
Pls avoid this Esp rainmaker kind of apps as it has got hidden limitations of devices ( total number) and allways remember their limitations on messages (MQTT). It works, looks good and valid only for testing kind of projects, else no value in real projects. It's not for pro's. Otherwise your video and effort is surely good 👍
I am facing the same issue. Firstly the chip doesn't start rainmaker after successful upload. It is throwing errors every second as (sw_cpu_reset) but when I try to fix some of the stack pointers and variables then I am able to connect to the device using the app but as soon as I turn on the fan or move the slider then the board resets.
brother while compiling this sketch I get error that the sketch is bigger than the space available and that it uses 136% space on ESP32. how do I fix it?
Dear, with humble request, code hasn't compiled. Under Void Get Relay State 1st mistake"fanSpeedControl(currSpeed); was not declared in this scope. 2nd mistake " SimpleTimer.h" no such file. Please reply as I keenly awaited. Thanks a lot.
while trying to pair with rainmkaer app with qr code, getting device not found, enabled the bluetooth and geo before scanning the QR code, could you please help me on this
I'm getting Claiming failed with error : Claim init failed error in the app, after scanning the qr code. it never happened before. Someone please help me.
If you want to buy this complete project (🔥Rs: 3399🔥), then please send an email to connect.techstudycell@gmail.com with your address.
(Including pre-programmed ESP32, DHT11 sensor, IR receiver, 1 selector Switch, IR remote)
want to buy only pcb..price ?
Hello this is monojit . I am using the esprainmaker app but its not reliable the signal just gets disconnected frequently and esp32 is also facing some problem. Can this same programme be done in adrino cloud iot with fan speed control. As before you have made only switching with adrinocloud can i also add fan speed control in adrino cloud please make a video based on adrino cloud with fan speed control
I want to buy only PCB i can or not
Hello sir how to meet this type of pcb and where
Only pcb prise kya hai and ager complete package dete hai to warrenty bhi hogi kya
Каждое видео на вес золота. Ты просто гений. Ждём твои шикарные разработки . Спасибо за труд.
Dear, Happy Diwali.
At last I succeed. Earlier I have done mistake now rectified. But in Google App, Fan speed can't control neither through app nor voice commands but through Alexa all things are happening through app as well as voice command. Really beauty of Home Automation. If possible, please try for Google also so that fan speed can be controlled as Alexa.
Thank you very much to share your knowledge.
You can on switch manually and off the switch by app it possible please answer
Yes it possible
Please do include the internal bluetooth option as during powersurge or internet issues at that time also we can control using Bluetooth..
Good Morning
Dear
I really like your video they are excellent and very didactic and functional. Congratulations.
Please, could you make another video teaching how to use the thermostat function in Rainmaker
With DS18B20 or and also with DHT22/11
I thank you in advance
Thanks... I will check
Hi,
I have a question regarding ESP 32.
Rainmaker turns on/off the lights but if we want to design different colors? or designs ,what else do we need ?
example in the picture in an SPI mode
serial peripheral mode to make the color & design.
Sir, can we connect the display for monitoring time and temperature and humidity.
please can you try to make with 16relays channel module
wow what a brilliant and inspiring idea. if you add a motor to the curtain it will definitely be more interesting.
Thanks a lot for this excellent project. Can you please tell how to add WS2812S (Addressable) LED Strip and modify the program for rain maker
Hello sir I am from India. I watch all your videos. I wanted to know a solution from you. That is, if you create a home automation system with ESP Rainmaker, you can use five appliances and one fan, and you can also make the system controllable with push buttons. Please make a video about it I am waiting for you. ❤️❤️
Sir, can I do the same with ESP 32 node MCU development board. Please reply.
Thanx and great salute for sharing your knowledge
what is the resistor value you used with the capcitor for fan dimming?
Please check the circuit.
You're doing a great job bro
hello engineer, I really need help on fan manual control i need only 2 bottom control instead of 4, I mean up and down only. thank you.
Pls make same video with adding inbuilt esp32 blootooth control also
Perfect! 👏👏👏
Let me sugest a topic, rainmaker + sonoff DIY
ok
Sir i have a question, why three relays are connected to the fan? Also why there’s filters on these three relays?
Great video brother... Awesome...!
Thanks
4:19 in which software this simulation is done??
Thanks for the long awaited project.
More to come!
Well explained...thanks for sharing
Sir ap arduino ide ka kon sa version use kar rahy ho
Hello this is monojit . I am using the esprainmaker app but its not reliable the signal just gets disconnected frequently and esp32 is also facing some problem. Can this same programme be done in adrino cloud iot with fan speed control. As before you have made only switching with adrinocloud can i also add fan speed control in adrino cloud please make a video based on adrino cloud with fan speed control
Sir esp 32 not connecting automatically with wifi when hotspot is off (when on) and esp 32 is on
Sir please 🥺 reply that esp32 were not connected automatically
Do you use active low relay module because after program esp32 when I turn off the switch my device gets high and vice versa after turn on it gets low
Yes. I used active low
Excellent project Bro, highly requested project.
Can you make a new video to incorporate preferences.h library with esp8266?
Already made video on ESP8266 and preferences.h
Nice project
Why doest confirm Node association, the module can be configured by RainMaker
use a new ESP32 board,
@@TechStudyCell thanks, Do you think that an ESP 32 no original could have this Problem ??
Sir, please can you make the same code but without the sensors part... Just switches and fan speed control
Your work is very good and helpful. I am facing a problem in compiling this code. "Error compiling for board ESP32 Dev Module. ". I have successfully compiled your code for ESP Rainmaker 8 channel module with preference library. The difference is only of DHT sensor. I have also added this library. If you got me, please explain. Thanking you.
Same issue
Can you make smart IR blaster
Keep it up bro.......
Thank you, I will
WOW ALL FEATURES AVILABULE IN THE SKETCH ,EXCELENT BROW U R MY BEST TECHNICAL RUclipsR WELDONE THANKYOU
When i turn on or off the fan all system getting restarted and wifi was disconnected and then connecting to wifi ,the fan relays are stationary ,no any changes ,please help me to solve this problem
same
@@ConradR do u fix that issue
Many thanks broh
excellent,
I have this project with complete documentation.
Features are
1. Door lock and unlock through fingerprint.
2. Water pump control system
3. Pir motion with lighting
4. Gas detection and exhaust system.
5. All status are shown on blynk iot app
Excellent 🙏
Thanks
Bro... I have a small idea... If that is possible that would make this project even more useful.... Can you add IR transmitter code so that we can control IR devices using voice commands or ESP Rainmaker app?
Please do reply about this idea... Is it worth it?
I am a huge fan if your work! I have a query, Rainmaker has a limit of 5 devices in one account. Is there a way to increase the IO's in ESp 32 board.
No limits. In previous Projects I have connected 8 appliances with rainmaker
can i yous this poject 8realy switch and estra fan speed up down controll
Please can I get the link on how to create the Bluetooth app my self
Nice vids always👍🏼
Glad you like them!
How to change wifi credentials for any update, like password or wifi SSID?
Please make a video on 60amp MPPT smart charge controller
Sir I want know how to make this project. Please tell me full information
Best videos expect more 😃👍👍
More to come!
@@TechStudyCell you always do same project with different type of method and version and i love it but can u do different so everybody likes GAS LPG FIRE sensor very important for household To avoid cylinder blast
Can i control appliances on 2 Android mobiles
Excellent 👌👌👌👌
Thank you! Cheers!
thanks for the video 🙏🙏does it work with esp8266??
No
I really like all of your projects❣️ Can you please make same project but using firebase and Mit app inventor.
Okay
Explain how to install this codes on esp32 s3 module
Brother, Thanks for your videos. WIFI DOES NOT CONNECT BACK IF router is restarted. Also Scheduling works only first time the board is configured. After that scheduling does not work once ESP32 is restarted After power outage.
Wifi connection issue is solved by restoring esp32 to factory settings and then using it again. But scheduling in Rainmaker app is not working. But scheduling in Alexa app is working fine
@@roopsvinay But we have to press the EN button everytime to connect it back to the wifi after a powercycle, why it doesnt automatically connect?
Why schedule feature is not working in rainmaker app. Is bcoz of the code. If it is then pls update how to make it work.
Pls avoid this Esp rainmaker kind of apps as it has got hidden limitations of devices ( total number) and allways remember their limitations on messages (MQTT). It works, looks good and valid only for testing kind of projects, else no value in real projects. It's not for pro's. Otherwise your video and effort is surely good 👍
Thanks sir
Bro,
Is it possible to access the ESP rainmaker device with the ip addresses through browser?
I have to check.
@@TechStudyCell ok, Thanks Bro
Bro this project work like a cham. But i need one more relay to control something please provide me the code
how to use the local language (not English) many languages......?
Kay aap course karao ge
Dear sir your not using bt136 instead of relay for controlling fan
error error: 'ledcAttachPin' was not declared in this scope; did you mean 'ledcAttach'?
Schedule is not working in rainmaker app for this code as it's not executing, automation is executing.
How to install .ino through Arduino 2.0, same keep in website
Why use pc817 optocupler in there?
Sir, in the code you have posted here, the dimmer of the fan does not work in the ASP Rain Maker app. Please fix it.
I am facing the same issue. Firstly the chip doesn't start rainmaker after successful upload. It is throwing errors every second as (sw_cpu_reset) but when I try to fix some of the stack pointers and variables then I am able to connect to the device using the app but as soon as I turn on the fan or move the slider then the board resets.
hi, using the provided code, when i try to control the fan speed from app, it restarts the esp32, manual control is updated fine.
am facing the same problem
When the fan switch is on in Rainmaker, esp32 gets rebooted
Connect a capacitor across the 5v
brother while compiling this sketch I get error that the sketch is bigger than the space available and that it uses 136% space on ESP32. how do I fix it?
Select proper board and partition scheme before compilation
@@TechStudyCell I have selected board as doit esp32 devkit v1. What do you mean by partition scheme?
Dear, with humble request, code hasn't compiled. Under Void Get Relay State 1st mistake"fanSpeedControl(currSpeed); was not declared in this scope. 2nd mistake " SimpleTimer.h" no such file.
Please reply as I keenly awaited.
Thanks a lot.
while trying to pair with rainmkaer app with qr code, getting device not found, enabled the bluetooth and geo before scanning the QR code, could you please help me on this
plz help me on this
I'm waiting this video with fan dimmer
good
Bhai is Circuit ko purchase karna hai kaha milega.
Please send email to connect.techstudycell@gmail.com
I want to buy single pcb for this..
Please send email to connect.techstudycell@gmail.com with your address.
ESP_RMAKER_PARAM_RANGE' was not declared in this scope
showing error
sir kicho koren
1 bochor theke ey project ready korte chesta kor6 hochhena
Reply to den
Sir I need Push button code
Code
Me to i need push button
Also i m waiting for push button code.
How much money will it take to make this sir
Sir HEX code not generated by the given file. It’s always showing 0*FFFFF. Plz help me to fix this problem.
Simpletimer library problem i am facing issue in compoling this code error compiling for board
Install the library
Sir why the Google home not connect with ESP rainmaker
Bhai ji aap ki sari video dekhta hu bahut badiya project banate ho aap ka no milega
When the fan switch is on in Rainmaker, esp32 gets rebooted
Sir I also commented this issue in last video but you don't reply that
Hi sir
Its automatically reset when fan switch on by rainmaker
you fix this error? I am also facing the same issue
It would be better if it had Bluetooth. Later want video with Bluetooth ,IR remote, EEPROM ,RainMaker.
Hii sir I connect esp32 with wifi but it disconnected after some time automatically what the problem
Can I use mobile hotspot on it. I don't have wifi router 😭.
Yes you can
أهلاً وسهلاً ومرحباً بك-يتعذر التعليق-لا أعلم .
bro you done it great job so much love too you
Welcome
How to buy this item sir???
Please send email to connect.techstudycell@gmail.com with your address.
Sir i have tried your code but it is always showing Error of copling with ESP32 DEV Module
Does anyone have a problem units going off line after two days of use??
Face cam 👍😊
I'm getting
Claiming failed with error : Claim init failed
error in the app, after scanning the qr code. it never happened before.
Someone please help me.
Please gave me code you are used in this video for fan with switch and regulator
Download from article. link in description
Sry bro i got you latter on i checked your code and also Circuit diagram
How i can buy pcb from your side sir i had send mail to you
Please check your email. I have sent details
Muuh se supari nikal ke bat kr re baba😂