A lot of tractor implements use those off centre nuts so they don’t come loose. There’s usually a mark on the bolt where it’s been pressed by a machine which makes it slightly out of round so it grips on tight and doesn’t come loose
I just installed 2 camber bolts in the front because the Firestone told me i need it to get the camber adjustment so i took the can back to them for realignment came out the same results wth , my front was -1.0 and -0.9 now it’s -1.1 and -1.0 wth did they do
A lot of tractor implements use those off centre nuts so they don’t come loose. There’s usually a mark on the bolt where it’s been pressed by a machine which makes it slightly out of round so it grips on tight and doesn’t come loose
It’s helpful know what car are you working on.
It's a Subaru
question? what is the size of the original bolt before you use camber bolt
How do you know what cam bolt degrees your vehicle should have?
The alignment machine will tell you how far out everything is, that’s where you’ll do the adjustments.
do you use anti-seize on the treads and bushing?
You can if you want to but a light coat on the threads is okay and chasis grease in the bushing
Interference threads
That's what I call threads i machined that the go-gauge won go on😅 the boss has no humor.
If a tech is doing alignments shouldn't he know to look for camber bolts?
After you adjust the camber you take the camber off or leave it there ?
U leave it
Which way should I have the camber bolt ? Up or down with the little nipple thing ?
Look how he has it in the video
I just installed 2 camber bolts in the front because the Firestone told me i need it to get the camber adjustment so i took the can back to them for realignment came out the same results wth , my front was -1.0 and -0.9 now it’s -1.1 and -1.0 wth did they do
It's crazy because firestone told me this today. However, they have already done 3 allotments for me in the past few months 😔
Well let them know next time what you want the camera to be set at. If you don't, as long as it's in the green they don't care
Thank you ❤ for sharing your knowledge . GOD speed 🙌 🫵 🫶