Apple

Поделиться
HTML-код
  • Опубликовано: 16 окт 2024

Комментарии • 52

  • @mrt1587
    @mrt1587 10 месяцев назад +2

    You can remove the front dashboard slightly where it hides the torq screw. Pull it gently and it gives you plenty of space to undo it with a screwdriver. Thirty seconds rather than sweating. Great video though. 😊

    • @funcarsgoodpeople
      @funcarsgoodpeople  10 месяцев назад

      Thank you Mr T! Very great advice! Pinned it!
      I should have realized this. It is just doesn't make sense to design the trim like we thought 😅 I also learned a lot from this work!

  • @FruitKck
    @FruitKck Год назад +2

    Attention to detail! Thx!

  • @incartechie
    @incartechie 7 месяцев назад +1

    Great install - we also do the same over here in the UK!

    • @funcarsgoodpeople
      @funcarsgoodpeople  7 месяцев назад +1

      Thank you for the comment! In Car Techie 🤗

  • @cwisfarouk
    @cwisfarouk 10 месяцев назад +1

    Excellent Tutorial - easy to follow .

    • @funcarsgoodpeople
      @funcarsgoodpeople  10 месяцев назад

      Hi F.Gerard Smith thank you for the comments! My pleasure!

  • @Nokmaar
    @Nokmaar Год назад +2

    Did you guys disconnect the 12v battery and the HV battery disconnect switch in the front of the car? Or were you able to do this work “live”?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад +2

      Hello Nokmaar, we did this work "live." But you are right with disconnecting all the batteries. I agree that is the most precautious and careful way to do the electricity works. Thanks for the comment!

  • @djmcmike2319
    @djmcmike2319 3 месяца назад +1

    Couldn't you add something to the sides the sharp support beam, like thick tape or something to avoid the cables being cut?

    • @funcarsgoodpeople
      @funcarsgoodpeople  3 месяца назад

      Hello Mike you are right about it. However, that workshop was lent to us so we were not fully prepared for this work which we never had experience about it.
      I am thinking about the foam cushion stickers which are commonly used for chairs/desks/doors, can be applied for this problem 🤗

  • @rme7635
    @rme7635 Год назад +2

    Great Tutorial and a nice piece of videomaking. Thank you! One question: Why can I not install the decoder next to the head unit and use the existing LVDS-cable to the screen? Then there is no need to put an additional power cable to the front? There is a lot of space under the rear seats, isn´t it? I think there is a Carplay/Android Auto-Set available for other BMW models that provide a short cable between head unit and decoder and still use the existing LVDS-cable to the screen? I think I could live with Wlan Antenne and Video/HDMI cable close to the back seats. What do you think?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi RME thank you very much!
      And I am amazed by your idea because I never thought about this. Brilliant! Yes you can leave the decoder under the rear seat alongside the head unit. Thus leaving the front part of the interior untouched.
      Man this is really an optimized idea 👍👍👍

    • @davidhoffman90
      @davidhoffman90 Год назад +1

      RME - I've read that this method only works on the i3 with the smaller screen. Apparently the i3 is very sensitive to the amount of power/signal going up to the front, especially with the larger screen as it draws more power. Anyone with the larger screen (stock, not added after the fact), gets a "no signal" error if they try this method.

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      @@davidhoffman90 Hi RME thank you very much for this information! Really professional aspect! I'd say that the signal output spec of the decoder may be lower than that of the original headunit, leading to signal/voltage loss when a longer routing of the video cable is used. Very interesting!

  • @andrewyu7403
    @andrewyu7403 Год назад +1

    Excellent tutorial - the best on RUclips! Where do you leave the USB cable for wired Android Auto?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi Andrew thank you very much 🤗 I’m so happy you like it 🙏 Mario left the USB cable at the lower center console because he usually set his phone in the center cup holder.
      You are welcome to come back anytime 😊 more DIY videos are coming!

  • @jaro-ch
    @jaro-ch Год назад +1

    Thanks a lot! Your video saved me a huge amo6nt of time. Great❤

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад +1

      Thank you jaro59! I’m happy you like it. I plan to do another video about installing apple car play to E90 CCC. Please come back any time!

  • @adhead
    @adhead Год назад +1

    Thanks for the detailed guid

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi Andrew thank you! I’m happy you like it 🤗 Come back often for more DIY videos!

  • @saminthisbody
    @saminthisbody Год назад +1

    Nice tutorial👍🏼 ready to order mine!

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi Santiago thank you! And wish you a big success. Please come back and let us know how you are doing 🤗

  • @AmerAqrabawy
    @AmerAqrabawy 2 года назад +2

    How we can leverage the HDMI cable in the device ? Can we connect input connection and watch it on the screen ?

    • @funcarsgoodpeople
      @funcarsgoodpeople  2 года назад

      Hi Amer,
      We haven't used this function yet but there is an input option of HDMI on the decoder menu so we think the answer is yes!

  • @jamescabotaje6560
    @jamescabotaje6560 7 месяцев назад +1

    If you have the EVO style, turn the toggle switch down 1 to 4. Mines a 2018 i3. If you only have it down from 1-3 then the screen wont turn on for the EVO style.

  • @mitchellgrooters5701
    @mitchellgrooters5701 Год назад +1

    Nice video! What phone holder/charger do you use! Looks reeaaally nice!!!!

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Thank you Mitchell 🤗 It’s Baseus City Lights. Please look it up. There are many similar products so I believe you can find it easily 👍

  • @jackychu0830
    @jackychu0830 2 года назад +2

    2015 BMW i3 Range Extender 能安裝嗎?

    • @funcarsgoodpeople
      @funcarsgoodpeople  2 года назад

      Hi Jacky您好,根據官網資訊,影片中這款車機可以安裝在2015的i3上,請參考網址:www.roadtop.com/wireless-carplay-for-bmw-i3-i01-nbt-system-2012-2017-with-android-auto-mirror-link-airplay-car-play-function-p0119-p0119.html

  • @itzikdagan2005
    @itzikdagan2005 Год назад +1

    Hi, thanks for sharing this video. From Where can i buy this device?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi Itzik, sorry the link in the description is kaput. Please use the link here; roadtop.com/en-tw/products/bmw-i3-i01-wireless-carplay It is made by roadtop.com

  • @heihei2333
    @heihei2333 Год назад +1

    请问2019年的i3能从小屏幕换成大屏幕吗?谢谢

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      德國黑黑您好。您是要從6寸升級原廠10寸嗎?我有找到這樣的教程ruclips.net/video/HOejX82FxLc/видео.htmlsi=saCRLI325UgXyfYK
      如果是要從10寸換更大的,我就不確定了。但應該有廠家做這樣的產品,可以搜看看。
      我最近在製作E90安裝Apple #Carplay + #AndroidAuto 的影片,也歡迎回來參考一下唷!

    • @heihei2333
      @heihei2333 Год назад +1

      @@funcarsgoodpeople 感谢回复,是的,从6升级到10。但是我目前看到的都说只有到2018年的还能改,2019年后的就不能改了。看你们做的很专业,就想问一下没准你们有办法。

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад +1

      德國黑黑您好,我找到的討論的確提及改款後的六代iDrive EVO不能直接換螢幕了,必需要連主機一起更換,並搭配一些編程/設碼工作。主要是因為零件材料號不相容,也可以說是被鎖住了。
      我所能理解的就到這邊了 😅 不好意思我的經驗也十分有限。得請您詢問附近的影音專門店家了 🙏 祝改裝順利!

    • @heihei2333
      @heihei2333 Год назад +1

      @@funcarsgoodpeople 非常非常感谢您的详细回复,还帮我去查了相关资料。祝生意兴隆。

  • @vergarasean
    @vergarasean Год назад +1

    What backup camera do you recommend to use with the decoder based on ease of install?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад +1

      Hi Sean thank you for the question! Most decoders support RCA video input so I'd say look for an RCA backup camera and stick it to the rear window (inner side.) Such RCA backup camera only has power input and RCA video output so wiring should be pretty simple. This can a quick hack if you don't have time and you need to use the car a lot 😅
      However, I'd still recommend the OE type backup camera which requires removing some trims and parts to run the harnesses. Have fun DIY! 🤗

    • @vergarasean
      @vergarasean Год назад +1

      @@funcarsgoodpeople do you know the part number for a 2015 bmw i3?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi Sean the OE backup camera has part number 66539475687. Please search "bmw 66539475687" then you will see how it looks like. However this camera uses the connector interface for the NBT system, which may not be compatible with aftermarket decoders. Please also look up "bmw i3 rca reverse camera" for the decoders.

  • @georgeakinian9804
    @georgeakinian9804 Год назад +1

    Mine used to work fine. But then it started to randomly not turn on and sometimes turn on. it started to show me only black screen. Now when I press menu button it shows me night sky with the car logo and CARPLAY written underneath, and it stays on that screen. How do I make it work again?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад +1

      Hi George thank you for the question. I am assuming you are talking about an aftermarket Carplay or AAdecoder. The first thing I can guess is overheating of the decoder. Even BMW headunit can freeze in such case.
      Please check that the decoder is working in an environment that spores not get too hot. Then try to reset the decoder via a button on its body.
      If the situation persists, the decoder is likely bad ☹️

  • @dopiaza2006
    @dopiaza2006 Месяц назад +1

    Would this work with a right hand drive (UK) i3?

    • @funcarsgoodpeople
      @funcarsgoodpeople  Месяц назад

      Hello dopiaza I think yes because the decoder is independent of driver side. However, I heard some i3 with small screen is not compatible. So please carefully check the product information and your model year!

  • @best0001tw
    @best0001tw 2 года назад +2

    超越讚

  • @TsaiShangLin
    @TsaiShangLin Год назад +1

    請問有沒有2019 i3s可以裝的

    • @funcarsgoodpeople
      @funcarsgoodpeople  Год назад

      Hi 尚霖你好,根據湛江Road Top的分類,2019的i3應該是iDrive EVO系統,請參考他們的商品頁面 roadtop.com/products/bmw-i3-i01-wireless-carplay?variant=43132253176051 購買的時候要確認iDrive介面的樣子,確認系統相容唷!謝謝留言 🤗

  • @greg7680
    @greg7680 2 года назад +2

    ƤRO𝓂O𝕤ᗰ ❗