Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this Thank you for making this video
30 seconds into this video I ordered one of these molds. Been looking for a small minnow bait with eyes and look what I found. Big fan of your channel.
Man Toby … love your content because your honest about what your talking about and your just you.. no front … no act… just you … and that mold is awesome!!!
Thanks for watching and subscribing! Welcome to my channel and I am currently watching your videos. Great content. It has been a great mold for me so far.
Thank you so much! I’ve been on the search for a certain mold and everyone made it either too this or not long enough.. he made exactly what I was looking for! Depending on how I like it when I receive it, I’ll definitely be purchasing a ton more from him. 🙏🏼🙌🏼💥
Just wanted to share what he made. It was a great product especially for the price. I already have more in mind I am gonna get done 😂. You can never have enough molds 😂
I have two of the fluke stingers and a 5 inch stic-o . You are correct, they do great on the laminate as well as a solid. If you put the bolts in, it’s a pain getting the molds apart, so I took them out and clamp as well. Can’t beat the prices either. I can shoot about 4 straight shots then give them a 5 minute rest. I’ve been impressed with them.
It looks a lot like my custom Silverside Minnow mold. It's the same type of profile. By no means is it a copy. Great profile! I have a 3.25" and a 3.75" The best thing to do with these little baits is to nose hook them with a small mosquito hook on 4 to 6lb test. Hang on!!! The bite is dumb on these little baits. When my fishing buddy is gaining on me, I turn to these little baits, and win.
Those are great sizes. I may have to order some of the 3.75. I like that size in this style bait. Like I said in the video, every bait has been made 100's of times. This one will be very close to many baits in this style. Went with a tail that I haven't seen. Thanks!
I will see how long it holds up. Just got it in and happy so far. I hope to get a reasonable amount out of them. The high temp resin should last longer than a silicone type mold
That's a bait that I need to get get! The 3" bait looks like the perfect Carolina-rig bait for Pompano, Redtail and Barred surf perch. Where can we get them?
Can you air clamp these with your aluminum molds at the same time? Will using chill plates hurt the mold? Meaning, going from a hot mold and dumping chilled water thru the chill plates.
I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.
I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.
Last night I tried to go to his website and I typed it in and a message come up can't find no results something like that and I type it in the way you have it in your title I want to order a couple of
ngraves.com is the website. I just typed it in and it went to his website. Double check the spelling and if you still have problems finding it let me know and I will see if I can help
@@sho95100 My apologies. Where I was getting it before is no longer a distributor. I have heard that Fat Guys Fishing is now selling Calhoun's. I have now switched over to Dead On plastics
Dude you sold this mold.. I bet his website crashed.. one question does the bait have a dull finish? A lot of these kinds of molds the baits have a really dull look
Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this Thank you for making this video
Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this
Thank you for making this video
You will not be disappointed. Great guy and he went above and beyond for me. I am a picky guy about baits and he was awesome. Thanks for watching!
30 seconds into this video I ordered one of these molds. Been looking for a small minnow bait with eyes and look what I found. Big fan of your channel.
Thanks so much! You'll be happy with it I believe. Thanks for watching!
Man Toby … love your content because your honest about what your talking about and your just you.. no front … no act… just you … and that mold is awesome!!!
I greatly appreciate that! Gotta be upfront and honest. Thanks for watching! 🙏
That’s gonna be money on a drop shot 💰 I also love being able to add eyes to finesse baits
Yes sir! Drop shot candy!!!!!
Thanks for the new site. Momma may think I need another mold like a hole in the head, but @ 73 bringin ' it. Good luck with the quackers.
You can never have enough molds 😂. Thanks and thanks for watching!
Very nice! They have some great looking molds. Thanks
Yes they do. Surprised me how good they shot. Thanks for watching! 🙏
most deffinatly i have to get this one , thanks for sharing
Thanks for watching and subscribing! Welcome to my channel and I am currently watching your videos. Great content. It has been a great mold for me so far.
Digging the baits! Went and checked them out. I’m impressed! I’m liking the speed crawl
There's a couple I want. Was so happy to get a few of the details put in the style I wanted. Thanks for watching!
@@five.0custombaits Definitely budget friendly as well! I understand the cost of aluminum and machine time but I can work with this!
@@clintjenkins13 Exactly! For me and my buddies. This will fish as well as my $1200 mold. I will be doing more business with him
@@five.0custombaits I have been looking for a mold to be kind of like the divine swim baits from 6th sense. His Slicker mold looks pretty close!
@@clintjenkins13 Will have to check it out. Thanks
Very sweet looking bait!! The walleye would chew them up here in Canada I'm going to have to get me one asap
Thank you! I'm quite sure they will chew on it! Thanks for watching!
Thank you so much! I’ve been on the search for a certain mold and everyone made it either too this or not long enough.. he made exactly what I was looking for! Depending on how I like it when I receive it, I’ll definitely be purchasing a ton more from him. 🙏🏼🙌🏼💥
Just wanted to share what he made. It was a great product especially for the price. I already have more in mind I am gonna get done 😂. You can never have enough molds 😂
@@five.0custombaits purchased one early and had to go back and get that helter lol
@@NWanglerzCHOICE It's gonna be 💰💰💰! Several ways to fish it and natural size. Thanks for watching and Merry Christmas!
I have two of the fluke stingers and a 5 inch
stic-o . You are correct, they do great on the laminate as well as a solid. If you put the bolts in, it’s a pain getting the molds apart, so I took them out and clamp as well. Can’t beat the prices either. I can shoot about 4 straight shots then give them a 5 minute rest. I’ve been impressed with them.
Thank you for watching! Seemed like a lot of screws, I was so happy ot worked clamping together. For the price, I am very happy
@@five.0custombaits have fun on your duck hunt.
@@newmexicooutdooractivities9826 Thank you! We just arrived in Louisiana and hopefully on them in the morning!!!
Subscribed to your channel and ordered the mold today.
Thanks for subscribing and welcome!!!
I gotta buy some of these asap
Hit me up. Email is five.0custombaits@gmail.com
It looks a lot like my custom Silverside Minnow mold. It's the same type of profile. By no means is it a copy. Great profile! I have a 3.25" and a 3.75" The best thing to do with these little baits is to nose hook them with a small mosquito hook on 4 to 6lb test. Hang on!!! The bite is dumb on these little baits. When my fishing buddy is gaining on me, I turn to these little baits, and win.
Those are great sizes. I may have to order some of the 3.75. I like that size in this style bait. Like I said in the video, every bait has been made 100's of times. This one will be very close to many baits in this style. Went with a tail that I haven't seen. Thanks!
I found the website thank you much 😅
Anytime. Thanks again for watching
Very good stuff and those are gonna get smoked. Thanks for sharing.
Thanks for watching! I agree, they will be 💰
That plastic is good for running a small but reasonable amount.of lures and heat. But they will scorch and spall and get brittle
I will see how long it holds up. Just got it in and happy so far. I hope to get a reasonable amount out of them. The high temp resin should last longer than a silicone type mold
That's a bait that I need to get get! The 3" bait looks like the perfect Carolina-rig bait for Pompano, Redtail and Barred surf perch. Where can we get them?
You can contact me at five.0custombaits.com or my other social medias and message me
Can you air clamp these with your aluminum molds at the same time? Will using chill plates hurt the mold? Meaning, going from a hot mold and dumping chilled water thru the chill plates.
I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.
I haven't tried to clamp to aluminum molds yet. I do not have an air vice or cooling plates. You will have to ask Mr. Graves about those things. Thanks for watching.
Last night I tried to go to his website and I typed it in and a message come up can't find no results something like that and I type it in the way you have it in your title I want to order a couple of
ngraves.com is the website. I just typed it in and it went to his website. Double check the spelling and if you still have problems finding it let me know and I will see if I can help
Thanks man
What size eyes does the 3 inch helter smelter require?
4mm eyes for the 3 inch
5mm eyes for the 4 inch
@@five.0custombaits hey thanks a lot. I just picked up the mold and find any information about the eyes
@@empireoutdoors1534 The bait is 🔥
Dont see the 4" on his site is that gonna be available?
He is working on the design now. Hope in a week or two. It should be fire when he puts his touches on it. Thanks!
Where are you purchasing Calhoun plastisol?
Primal plastix
@@five.0custombaitscould you provide a link?
@@sho95100 ngraves.com
Ngraves bait molds
@@five.0custombaits I was referring to the Calhoun plastic
@@sho95100 My apologies. Where I was getting it before is no longer a distributor. I have heard that Fat Guys Fishing is now selling Calhoun's. I have now switched over to Dead On plastics
How can i buy the baits not the mold?
You can email me at five.0custombaits@gmail.com or message my social media pagee
is it available in a 4" ?
@@davidraguse2106 It is available in a 4 inch. Thanks for watching! 🙏
Dude you sold this mold.. I bet his website crashed.. one question does the bait have a dull finish? A lot of these kinds of molds the baits have a really dull look
The finish is shiny. I expected a dull finish. These baits were all shot in that mold. Thanks for watching!
You are promoting a bunch of copy cats that infringe on other people’s ideas. Shameful.
I appreciate your opinion. Whether I agree with it or not. Thanks for watching and have a great day!
Oh man this is awesome Ironically I have contacted him today and mailed him a bait i made up to become a injection mold!! So happy to see this
Thank you for making this video
You will be happy with the results. He is great to deal with and the product is great. Thanks for watching!