Ok folks, just so I don't get asked for 100th time, I did end up heating the knife to cut the wax . I thought I was recording but didn't 🤷♂️🤦♂️ Thanks for Watching and hope you enjoyed it 😊
Would you do both sides of the canvas if you were making a poncho. Like a world war 2 style poncho. That’s kinda what im going for. I just wanted to see if you’d give some advice on the process it would be soft something like this.
Hi. To help prevent the wax from setting so fast, I use my heat gun to preheat the canvas in small areas. I find it makes applying the wax easier and a bit faster because the wax does not set as fast on the cold tarp. If there is a seam, be sure to heat it enough for the wax to penetrate all the way through the entire seam especially into the thread holes. Be careful not to melt the thread if is synthetic. Cheers.
This industry used to be huge. Now it’s rarely more than a small venture for customized bags. Really just sad how we’ve thrown away and forgotten old technology.
@@ChrisRedfield-- It's happening globally for people who realize the ceiling in quality with plastic products. From sewing machines to finishes like this.
You omitted the most important ingredient. Because the two waxes you have recommended are hard and get harder over time so in many cases the canvas or cotton threads can break in the material if subject to constant movement. The addition of "Petroleum Jelly" keeps the waxes supple.
@@AussieArchery If you melt paraffin into mineral oil, what is it like when you let it cool? Does it stay liquid? or does the paraffin "crystalize" out?
Put your wax in the freezer for about 20 min. to harden it then grate it or use a chisel or similar to shave it down so it'll melt faster and more evenly and prevent scorching it. I also add some coconut oil and/or olive oil at about 10:1 to keep it softer and from being so crumbly after it's applied and help it set into the fabric a bit better, IMO. Plus you can use the leftover wax for you tool handles, boots, sheaths and anything leather and as a chapstick or for dry, cracked hands and it works as a lube for squeaky hinges and whatnot and as a fire starter/extender. I put mine in little tins and keep them in my packs
@@kibonge61 opposite. if u did 10 parts olive oil might as well put ur canvas on the stove and start cooking it...jokes aside, 10 parts should be wax to 1 part oil. Any more oil and it wouldn't make sense cus you know.. your waxing it, not oiling it.
Absolutely the best method, freezer and chisel ......Unless you buy pelleted wax in the first place - doesn't seem to cost any more per pound. Clear mineral oil [I use baby oil] up to about 20% gives a more flexible finished tarp, best mix for lightweight cloaks or jackets , B.L.O. works OK but is strong smelling cures slowly and dries stiff..Might be an advantage if doing hats or canvas packs, or anything that you want to dry stiff
Cracking video, I’ve been searching for a budget waterproof poncho for some time, now I’m going to use this method on my cotton poncho I already have! You saved my budget and got a new subscriber. Thanks again for such a well considered tutorial
I eyeball a 3:1 wax to turpentine mix (adding turps to wax after melting) so that the fluidity isn't completely dependent on heat while still applying plenty of wax to the surface. It definitely helps with evenness and saturation. Yes, it does mean you have to wait for the turps to evaporate, but still seems to speed up the whole process and produces good results with less time and less heat, especially if doing several pieces together.
I am from Argentina, and I've been "winterizing" my boots (and the missus too, or I am dead, You know), shoes (even the expensive ones) for years now. And I use a lot less turpentine....say 10% by weight and yes: It surely helps!!
@@RI-ns8wz I'll have to try it with less solvent next time. Thanks for the tip. I started doing it this way because of my experience using the classic wood treatment made from wax, turpentine, and linseed oil. The linseed oil would be bad since it cures hard and will crack and potentially damage the fibers. But now that I think of it, a bit of neats foot oil in the mix might be a good thing.
I did a tarp the same way but during the summer time and just let my tarp sit out in the daytime and warm up, and it def helped alot with the blending process.
This was a damn good video. More useful information in 10 minutes than in most 1 hour videos. Keep it up. I'm going to look for your oiled cloth video.
Another option if you don't have a heat gun is to put a sheet of greaseproof paper on top of the fabric and use a clothes iron. Without steam of course. 😁
Or even without the paper, if you have an abandoned basic clothing iron that could be repurposed as a "waxing iron"? They tend to be easy to find. I used to use one for ski waxing and it worked well there. The ski method is to hold the block of wax on the iron to drip it on, and then spread it around, but that probably wouldn't work well with an absorbent surface. So perhaps the melting and brushing would still be needed.
Thanks a bunch freind. I like vintage hunting apparel and was wanting to learn how this is done. I appreciate your putting out this video. Be safe out there.
I use a old iron, one without water/steam ports on the bottom to iron in the wax. I also put a touch of resin with the wax to make it less sticky on warmer days
This kind of craft is worth learning especially if you are into outdoor activities leatherwork weaving rope making simple but essential for basic outdoor gear which inturn is part of basic survival great skill to have
Nice video I enjoyed it. I used the wax and heat gun method on my winter coat that's duck canvas and a winter camouflage top that I made from a drop cloth works very well.
I wish I came upon this video a while ago. I do something similar for fire starter (wax and gasoline with cotton pads) but now I’m going to wax everything!!! One question, I have an oil canvas with wool blanket sewn into it. Do you recommend adding a waxed layer for a ground sheet or is oil cloth good enough?
For pieces that small could you have put them into an over at 200 degrees to aid the process of getting the wax deep into the cloth. Kinda of like using snow seal on boots?
Man... That works way better than the rub on method, not to mention the heat gun vs. a hair dryer. I've seen some folks use microcrystaline wax instead of parafin because it's more flexible, but I can't imagine that being an issue on a ground cloth.
I was thinking you might’ve been able to heat up the cleaver blade to cut the wax. Is the paraffin wax mostly just to make the beeswax go further since it’s more expensive?
I have heard of old timers using both turp, and a few squirts of linseed oil in the mix when treating "tin pants." Do you have an opinion on that, and especially on using the linseed. -Tankx
Very cool process Ray. I especially enjoyed it when you brought out the cleaver 😂. Looks good afterwards and will provide that extra protection. Thanks brother!
Another excellent video my friend. Here is a fun story, I dont know if you have ever heard of frog lube. Long story short, you rub it into your gun barrel for example, use the heat gun and melt it into the metal wipe of the excess etc, good lube stuff,. I took it to work and a buddy of mine may or may not have melted some components on the desk at work. hehehe. DOnt tell on me. Thanks for sharing this video with us and I hope you have a blessed week. Dale
I probably wouldn't. It gets flaky and brittle on its own. Unscented beeswax mix candles work well and sometimes you can find those pretty cheap. Thanks for Watching
If the wax is hard (frozen) you might want to use an old cheese-grater - works wonders and makes the melting more even. For melting - pre-heat the wax if you can. Like lettings it sit on a radiator (in the cold times), or toss it in the oven after using it. You can even use the microwave but be warned it is dangerous: only for a short time and only to get it a bit warm and softer - you do not want to melt it unless you know what you are doing (or you are fine with an exploding wax-fire). The wax can be mixed with other things depending on the needs or what you like: Parafine-wax is really cheap and more slippery, pine resin (sticky, smells nice), tallow ( supple), turpentine (better spreading). It helps if you can pre-heat the fabric and the surface you are working on - if you have a work-table you can just use a hair-dryer or hotgun to heat up the surface and then heat up the canvas - this will make the wax stay liquid for longer so it can penetrate the fabric far easier, faster and more evenly. once you are done you can leave the wax in the melting-container if you do not need that for anything else. Otherwise make sure to pour it out while it is still hot.
Outstanding video and info friend, I learned from another video that you can substitute the round wax toilet rings instead of buying wax or paraffin, it’s much cheaper! 🙏💪💪
Great job Ray, great video! You have me inspired to wax some items. I am learning to sew, maybe when I ready to get a sewing machine I will get one that can do canvas.
I did it to a couple 4x7 ground cloths and my wife wouldn't let me use her hairdryer so I used her iron instead. She doesn't use it often so she doesn't know about it yet. Might be I should replace it before she finds out...
I think I'm gonna do this to my complete shelter half puptent. Might take a week or two, but it'll be worth it, to be more water proof. Might need 10 times the amount of wax, too
I wish I had a spare, clean brush the last time I was waxing fabric! Had to settle for a plastic spoon. 😅 Per breaking the wax up, rather than getting one big chunk in one fell swoop, I'd whittle a bunch of wax on to a newspaper which I could then use to funnel the shavings into a jar for future use. Yeah, it's a little time intensive, but the resulting wax flakes melt pretty quickly.
Thanks. I saw on another bu man's bushcraft video where he made a sleeping bag out of a painters canvas drop cloth that he folded over and sewed together. He had waxed it so it is waterproof. Today I bought a canvas and am planning on doing the same. One question, why the beeswax rather that just paraffin? Is there a tactical advantage?
Do you like this better than the silicone glue and mineral oil trick that others are suggesting? I know it is more old school. But, I can do the Silicone & oil thing with no equipment other than a cheap chip brush. Some of us, who live out on the road, may not have access to enough electricity to run a heat gun, and a propane torch is kinda not recommended (unless one has a very light touch).
@@GrantSR definitely do silicone if you can. I just did this for nostalgic purposes. It's still holding up though and use it weekly if not daily out hiking. Thanks for watching
Super cool. Seems easy enough if you have the tools. I have wax I never used that came w/my Fjallraven jacket. Wonder if that's the same type? I never even looked how to apply it. I suppose I should have lol. Good vid. These kind of videos are very helpful to people I think. You're a good teacher. I will try on my jacket. Thanks.
Yah man 👍 I'm guessing they have some different ingredients for "easy" application but same principle. Their's is meant to be rubbed on with friction then use a hair dryer afterwards to melt into fabric. I'm sure they have a "HowTo " video about. Thanks again Rockie 😁
Pine rosin adds an anti-mold-fungus-mildew-bacteria effect. If you add in both pine rosin and mink oil, you get a good waterproofing mixture for leather. I would not use the mink oil on cloth.
@@BBQDad463 How much pine rosin do you use with the wax 4 waterproofing leather? I love that idea! like for a cup of melted wax, how much Pine rosin would you add and where in the process? (While you're melting it, or after taking it off the heat? Thanks!!!
To get wax penetrate best to the canvas, you can put the canvas🎉 after swiped with the wax to the siphon under the pressure, then heat the cylinder slightly with heat gun. After a while release the cylinder from pressure and voila, you have a perfect oiled canvas!😊
Any reason to use wax over silicone? Seems to me wax will crack when you bend the cloth. This is a lot of work compared to modern waterproofing products.
Ok folks, just so I don't get asked for 100th time, I did end up heating the knife to cut the wax .
I thought I was recording but didn't 🤷♂️🤦♂️
Thanks for Watching and hope you enjoyed it 😊
Would you do both sides of the canvas if you were making a poncho. Like a world war 2 style poncho. That’s kinda what im going for. I just wanted to see if you’d give some advice on the process it would be soft something like this.
Thanks,What's the ratio for each wax.I may have missed it in the video.
To break up the wax, use a cloth bag and a hammer on an uneven surface, much easier than cutting. A hot knife works too. Good stuff.
Hi. To help prevent the wax from setting so fast, I use my heat gun to preheat the canvas in small areas. I find it makes applying the wax easier and a bit faster because the wax does not set as fast on the cold tarp. If there is a seam, be sure to heat it enough for the wax to penetrate all the way through the entire seam especially into the thread holes. Be careful not to melt the thread if is synthetic. Cheers.
Very good 👍🏻
How much wax does this process use? I have a 5ft x 8ft canvas I want to do this to just want to know how much wax I need to buy roughly
this mix comes in handy when treating axe and hammer handles, just heat it up with a fan or over a flame and rub it in after application
His method produces a more uniform application and... It's easier lol
This industry used to be huge. Now it’s rarely more than a small venture for customized bags. Really just sad how we’ve thrown away and forgotten old technology.
Plastics will be replaced slowly by the old fashion technology.
The Public School was very successful in turning Americans into uneducated consumers.
The spell has been lifted, for we Special Few, who Seek.
@@ChrisRedfield-- It's happening globally for people who realize the ceiling in quality with plastic products. From sewing machines to finishes like this.
You omitted the most important ingredient. Because the two waxes you have recommended are hard and get harder over time so in many cases the canvas or cotton threads can break in the material if subject to constant movement. The addition of "Petroleum Jelly" keeps the waxes supple.
Right on 👍🏻
What ratio do u recommend?
@@bloodborne6 Usually 10% of the total weight of wax, though in colder climates up to 20% stops the wax hardening to much.
Yep petroleum jelly or even paraffin/ mineral oil works too
@@AussieArchery If you melt paraffin into mineral oil, what is it like when you let it cool? Does it stay liquid? or does the paraffin "crystalize" out?
if you freeze your wax blocks, then grate them, they melt more evenly and faster.
Thank you, I'll try that 😊
Put your wax in the freezer for about 20 min. to harden it then grate it or use a chisel or similar to shave it down so it'll melt faster and more evenly and prevent scorching it. I also add some coconut oil and/or olive oil at about 10:1 to keep it softer and from being so crumbly after it's applied and help it set into the fabric a bit better, IMO. Plus you can use the leftover wax for you tool handles, boots, sheaths and anything leather and as a chapstick or for dry, cracked hands and it works as a lube for squeaky hinges and whatnot and as a fire starter/extender. I put mine in little tins and keep them in my packs
Hi that mix sounds good.10 parts coconut/olive oil to 1 part wax?
@@kibonge61 opposite. if u did 10 parts olive oil might as well put ur canvas on the stove and start cooking it...jokes aside, 10 parts should be wax to 1 part oil. Any more oil and it wouldn't make sense cus you know.. your waxing it, not oiling it.
🤣🤣🤣true true thanks for reply i will do my bell tent in summer
Absolutely the best method, freezer and chisel ......Unless you buy pelleted wax in the first place - doesn't seem to cost any more per pound.
Clear mineral oil [I use baby oil] up to about 20% gives a more flexible finished tarp, best mix for lightweight cloaks or jackets , B.L.O. works OK but is strong smelling cures slowly and dries stiff..Might be an advantage if doing hats or canvas packs, or anything that you want to dry stiff
anyone try a little linseed oil? I am thinking about that. any advice?
Cracking video, I’ve been searching for a budget waterproof poncho for some time, now I’m going to use this method on my cotton poncho I already have! You saved my budget and got a new subscriber. Thanks again for such a well considered tutorial
Well good deal 👌 👍🏻
Glad you enjoyed and hope it helps
Thank you 😊
I’m thinking of making the same. How does it hold up? Any rain where you are yet
I eyeball a 3:1 wax to turpentine mix (adding turps to wax after melting) so that the fluidity isn't completely dependent on heat while still applying plenty of wax to the surface. It definitely helps with evenness and saturation. Yes, it does mean you have to wait for the turps to evaporate, but still seems to speed up the whole process and produces good results with less time and less heat, especially if doing several pieces together.
Right on 👊🏻
I am from Argentina, and I've been "winterizing" my boots (and the missus too, or I am dead, You know), shoes (even the expensive ones) for years now. And I use a lot less turpentine....say 10% by weight and yes: It surely helps!!
@@RI-ns8wz I'll have to try it with less solvent next time. Thanks for the tip. I started doing it this way because of my experience using the classic wood treatment made from wax, turpentine, and linseed oil. The linseed oil would be bad since it cures hard and will crack and potentially damage the fibers. But now that I think of it, a bit of neats foot oil in the mix might be a good thing.
I did a tarp the same way but during the summer time and just let my tarp sit out in the daytime and warm up, and it def helped alot with the blending process.
Right on 👍🏻
This was a damn good video. More useful information in 10 minutes than in most 1 hour videos. Keep it up. I'm going to look for your oiled cloth video.
Well thank you 😊
thats cool
😊👍
Pretty cool Ray ... might have to give that a try!!! I also enjoyed the Flemish twist video.... thanks for posting.
Thanks Kurt 😊
It's pretty easy
Another option if you don't have a heat gun is to put a sheet of greaseproof paper on top of the fabric and use a clothes iron. Without steam of course. 😁
Definitely 👍
Probably cheaper this way?
Or even without the paper, if you have an abandoned basic clothing iron that could be repurposed as a "waxing iron"? They tend to be easy to find. I used to use one for ski waxing and it worked well there.
The ski method is to hold the block of wax on the iron to drip it on, and then spread it around, but that probably wouldn't work well with an absorbent surface. So perhaps the melting and brushing would still be needed.
Nice idea to use a double boiler (that can in a pot of water) to melt the wax. Waxed canvas is so useful, awesome "how to" video. 💯❤👍
Thank you
Thanks a bunch freind. I like vintage hunting apparel and was wanting to learn how this is done. I appreciate your putting out this video. Be safe out there.
I'm glad you found it helpful and enjoyable
Thanks for Watching
Pretty cool. I have never seen that done. Might give it a try! Thanks for the video
😁👍🏻
My dads old waxed canvas tarps smelled like crayons. Very interesting. Thank you.
I use a old iron, one without water/steam ports on the bottom to iron in the wax.
I also put a touch of resin with the wax to make it less sticky on warmer days
I can't believe you don't have more people checking your channel out. You need more subscriptions! I just added one.
Well, thank you very much 😁
Feel free to share.
I appreciate that
This kind of craft is worth learning especially if you are into outdoor activities leatherwork weaving rope making simple but essential for basic outdoor gear which inturn is part of basic survival great skill to have
👍🏻
Sweet! I have some bags like those that really need to be waxed. Great how-to video!
Thanks Vern
Hope it helps
Nice video I enjoyed it. I used the wax and heat gun method on my winter coat that's duck canvas and a winter camouflage top that I made from a drop cloth works very well.
Right on 👍🏻
Could also use turpentine or some other kind of thinning agent to help the wax penetrate and then set when the agent dries off
Yes 👍🏻
Excellent video thanks for sharing 👌
Much appreciated 👊🏻
........Very handy craftsman ideas....good work. Hope you made it through the snowstorm with no damage...it looked rough on interactive radar.....
Thanks Greg
Yah, we're okay. Gotta a little iffy but so far so good 👍
Thanks for Watching
The sound effects made when trying to break the wax were hilarious!!!🤣
😁👊🏻
Excellent video! I really enjoyed this. It gives me an idea on the time involved in waxing a 10x10, or 12x12 canvas tarp also. Keep 'em coming sir!
I also am thinking about making a 12×12, I hope yours comes out well!
good tutorial, the other one i watched previously didnt use the brush in conjunction with the hot air gun like you did, i like your way better.
I wish I came upon this video a while ago. I do something similar for fire starter (wax and gasoline with cotton pads) but now I’m going to wax everything!!!
One question, I have an oil canvas with wool blanket sewn into it. Do you recommend adding a waxed layer for a ground sheet or is oil cloth good enough?
Right on 👍🏻
I guess it wouldn't hurt to add an layer of protection
Thank you for the informative video!
Thanks David ,hope it helped.
I'm just winging like everyone else
For pieces that small could you have put them into an over at 200 degrees to aid the process of getting the wax deep into the cloth. Kinda of like using snow seal on boots?
Great idea 💡 👍
Great video
Thank you Jason
Some Hunting leggings and pants come with this when new but need a reapplication over time. Good video😁
Ed c
Man... That works way better than the rub on method, not to mention the heat gun vs. a hair dryer. I've seen some folks use microcrystaline wax instead of parafin because it's more flexible, but I can't imagine that being an issue on a ground cloth.
Yah man 👍
That's what I wanted to use but couldn't find any around here 🤷♂️
Thanks Nick
@@RiverbendlongbowsOutdoors Would you still need the beeswax?
I was thinking you might’ve been able to heat up the cleaver blade to cut the wax.
Is the paraffin wax mostly just to make the beeswax go further since it’s more expensive?
Yah, I did end up heating up the knife just didn't get it on film.
And yes, thought that would help make beeswax go further.
@@RiverbendlongbowsOutdoors good to know, thanks. I’m planning to do some of this soon.
One year later I’m finally gonna give it a try.
I have heard of old timers using both turp, and a few squirts of linseed oil in the mix when treating "tin pants." Do you have an opinion on that, and especially on using the linseed.
-Tankx
Sorta reminds me of my old Filson Brush Pants, somewhat similar!
Yes sir 👍
Very cool process Ray. I especially enjoyed it when you brought out the cleaver 😂. Looks good afterwards and will provide that extra protection. Thanks brother!
Yah, I really thought the cleaver would do the job 🤷♂️
Glad you enjoyed it Doug 😊
Looks good. Thanks for showing us. Take care.
Dude, I'm glad you showed up 👍
RUclips and Instagram have decided for me who I see 🤦♂️
Thank you 😊
Yep, just came over and I was un subscribed 😔
I'm back
As I was watching your vidio I was thinking to put the canvas in the dryer to worm it up, then put the wax on the canvas wile it is worm.
Thanks, A really interesting video.
Thanks for Watching
Thank you, Ray!
You're welcome 😊
Thanks for Watching
Awesome. Thanks for sharing!
You're welcome 😊
Very interesting combo.seems easy but bet I could mess it up lol Nice as always Ray!
😄 Thanks Chris
7:57 also is it recommended to put the white wax to mix with it ?
Not sure how I am only just discovering your channel mate. Awesome vid and great content! Greetings from Western Australia.
Glad you found me 😁👍
Thanks for Watching
Another excellent video my friend.
Here is a fun story, I dont know if you have ever heard of frog lube. Long story short, you rub it into your gun barrel for example, use the heat gun and melt it into the metal wipe of the excess etc, good lube stuff,. I took it to work and a buddy of mine may or may not have melted some components on the desk at work. hehehe.
DOnt tell on me.
Thanks for sharing this video with us and I hope you have a blessed week.
Dale
🤣 thanks Dale
I sure wish you had explained why you mix bee's wax with paraffin? What does it do differently than just using plain paraffin?
Can you use straight parifen wax
I probably wouldn't. It gets flaky and brittle on its own.
Unscented beeswax mix candles work well and sometimes you can find those pretty cheap.
Thanks for Watching
Good job 👍🏻
Thank you
Hoping to do this soon.
Right on 👍
thanks for this great video. very informative
No problem 👍
Glad you enjoyed it
If the wax is hard (frozen) you might want to use an old cheese-grater - works wonders and makes the melting more even.
For melting - pre-heat the wax if you can. Like lettings it sit on a radiator (in the cold times), or toss it in the oven after using it. You can even use the microwave but be warned it is dangerous: only for a short time and only to get it a bit warm and softer - you do not want to melt it unless you know what you are doing (or you are fine with an exploding wax-fire).
The wax can be mixed with other things depending on the needs or what you like:
Parafine-wax is really cheap and more slippery, pine resin (sticky, smells nice), tallow ( supple), turpentine (better spreading).
It helps if you can pre-heat the fabric and the surface you are working on - if you have a work-table you can just use a hair-dryer or hotgun to heat up the surface and then heat up the canvas - this will make the wax stay liquid for longer so it can penetrate the fabric far easier, faster and more evenly.
once you are done you can leave the wax in the melting-container if you do not need that for anything else. Otherwise make sure to pour it out while it is still hot.
Very good 👍🏻
Great video thanks
You can also use a fine cheese grater and grate the wax onto the tarp, then let it sit in a desert sun for a day. BTDT long ago.
can use a hot iron and a sheet of Al foil, also you can grate the wax for quicker melting
Love it. Think I'll give it a bash. Thanks very much
Right on
Heya, sorry to post on an older video, but I noticed your gloves and love them. Do you remember where you got them?
I think at a Tractor Supply
Thanks for this excellent video! 😎
Thank you 😊
Great video really enjoyed it
Right on Jerry 👍
Outstanding video and info friend, I learned from another video that you can substitute the round wax toilet rings instead of buying wax or paraffin, it’s much cheaper! 🙏💪💪
Much appreciated 🙏
Yes, that's a great tip
Thanks for Watching
@@RiverbendlongbowsOutdoors you betcha! 😃
Great job Ray, great video! You have me inspired to wax some items. I am learning to sew, maybe when I ready to get a sewing machine I will get one that can do canvas.
Good deal 👌
Thanks for Watching Jerry
Speedy stich
Could you do this with bayberry wax??
Nice project Buddy 👌👏👍👊✌️🍻
Thanks man 👊
If you wash the fabric in a washing machine, will the wax come off?
Handwash with cool water is what I do
@@RiverbendlongbowsOutdoors okay thanks!
Which would work better for a cover tarp for, say, an A-frame or something? Does one stay waterproof longer?
Edit: the oilskin tarp or the wax one?
Definitely wax I would say 👍
Thanks for Watching
I did it to a couple 4x7 ground cloths and my wife wouldn't let me use her hairdryer so I used her iron instead. She doesn't use it often so she doesn't know about it yet.
Might be I should replace it before she finds out...
😂😂👍🏻
I got my own iron for $1 at the salvation army. Maybe you should get one so ya dont ruin your wife's lol
buenisimo! gracias por compartir!
Si 😁 👊🏻
Could you use just straight white paraffin wax to do this??
great instruction, ive only ever seen where people rub it on...why mix with parafin?
Thank you 😊
I think it helps make it more pliable
I love it buddy! Bout to have to do the same thing
😁 fun stuff 👍🏻
Whay did you also use the parrafin, instead of just the beeswax?
How do you clean the brush? Thanks!
Awesome ray I might give this one a try
Thanks Jeremy 😊
Good stuff.
Yes sir 👍
I use a small crock pot,work well and don't have to worry about fire.
I think I'm gonna do this to my complete shelter half puptent.
Might take a week or two, but it'll be worth it, to be more water proof.
Might need 10 times the amount of wax, too
I wish I had a spare, clean brush the last time I was waxing fabric! Had to settle for a plastic spoon. 😅
Per breaking the wax up, rather than getting one big chunk in one fell swoop, I'd whittle a bunch of wax on to a newspaper which I could then use to funnel the shavings into a jar for future use. Yeah, it's a little time intensive, but the resulting wax flakes melt pretty quickly.
Thanks. I saw on another bu
man's bushcraft video where he made a sleeping bag out of a painters canvas drop cloth that he folded over and sewed together. He had waxed it so it is waterproof. Today I bought a canvas and am planning on doing the same. One question, why the beeswax rather that just paraffin? Is there a tactical advantage?
Right on 👍🏻
The paraffin is petroleum based and won't last as long as beeswax
@@RiverbendlongbowsOutdoors Thanks for the pro tip!
@@RiverbendlongbowsOutdoors Why are using paraffin at all? Are there issues or disadvantages to using 100% beeswax?
@@FredTusing it's a cheap medium to help stretch the mixture.
Do you like this better than the silicone glue and mineral oil trick that others are suggesting? I know it is more old school. But, I can do the Silicone & oil thing with no equipment other than a cheap chip brush. Some of us, who live out on the road, may not have access to enough electricity to run a heat gun, and a propane torch is kinda not recommended (unless one has a very light touch).
@@GrantSR definitely do silicone if you can. I just did this for nostalgic purposes. It's still holding up though and use it weekly if not daily out hiking.
Thanks for watching
I just use lemon pledge, the spray-on furniture wax. You'd be amazed at how quick and easy you can waterproof a jacket or a coat.
Super cool. Seems easy enough if you have the tools. I have wax I never used that came w/my Fjallraven jacket. Wonder if that's the same type? I never even looked how to apply it. I suppose I should have lol. Good vid. These kind of videos are very helpful to people I think. You're a good teacher. I will try on my jacket. Thanks.
Yah man 👍
I'm guessing they have some different ingredients for "easy" application but same principle. Their's is meant to be rubbed on with friction then use a hair dryer afterwards to melt into fabric.
I'm sure they have a "HowTo " video about.
Thanks again Rockie 😁
what if you used an iron and some parchment paper ? similar to waxing skiis
Nice Ray! Have you ever added pine rosin? Im not sure as to the “why” but Filson uses it in their blended wax
If I had pine trees I would.
Used pinion pitch mixed with wax years ago and that worked well .
Thanks for Watching Christian 😁
I want to make waxed canvas that's slightly tacky or sticky... Wonder if that would do it?
@@goneballistic I'm curious, why tacky?
Pine rosin adds an anti-mold-fungus-mildew-bacteria effect. If you add in both pine rosin and mink oil, you get a good waterproofing mixture for leather. I would not use the mink oil on cloth.
@@BBQDad463 How much pine rosin do you use with the wax 4 waterproofing leather? I love that idea!
like for a cup of melted wax, how much Pine rosin would you add and where in the process?
(While you're melting it, or after taking it off the heat?
Thanks!!!
What is the importance of the 50/50 wax mix?
I’ve been using a crockpot to melt wax.
👍🏻
I am looking forward to trying this!
It's very easy 👍😊
Old crock pot or Potpourri pot works awesome for melting
That's right Jayne. Or Fondu pot
Thanks for Watching
A cosmetic hot waxing pot (used in waxing salons) would work well for this too. 👍
Good to know 👍
Thank you
To get wax penetrate best to the canvas, you can put the canvas🎉 after swiped with the wax to the siphon under the pressure, then heat the cylinder slightly with heat gun. After a while release the cylinder from pressure and voila, you have a perfect oiled canvas!😊
They STILL make Gulf Wax? I haven't see that since I was a Kid!
Any reason to use wax over silicone? Seems to me wax will crack when you bend the cloth. This is a lot of work compared to modern waterproofing products.
Totally agree 👍
This was just for nostalgic purposes.
Thanks for watching
Can you use just paraffin wax if you can't find bees wax
Ive not tried...yet...bit i suspect that if you used the brown green and other earth coloured wax crayons you could make it camo..
@@davidallcock6316 possibly 🤔
Thanks for watching
Which is better for a camping tarp? Oil skin, or this bees wax method? If oil, would you please put a link for me to follow ♥
What's the purpose of the wax ratio? What happens if you use only bees/paraffin wax. What about the durability of the coating?
Nice! 🍺
😊👊
Awesome!
Right on 👍
Can I just say how much I LOVE how masculine this video is?!!
Love it! Thx
😁thanks
Info about where to get wax would be nice.
Amazon, grocery store, farmers market , local beekeeper
Thanks for Watching