Then what's next? I finished making the design, how should I export it or what should I do in order to 3D print it? Great video by the way, extremely useful and educative.
Do you have any tutorials about how to make sure our files are ready for 3d printing? I managed to make a pieces using your tutorials and am about ready to send them to a printing house and then getting them molded and cast. I just want to be prepared. Thanks!!
@@PJChenJewelryDesign Thank you! I tried to follow this tutorial but i could not get the pattern to flow along the surface. I tried to follow your troubleshooting video for FlowAlong Surface issues, but it still hasn't resolved. Are there any steps that wouldn't be obvious to beginners like me that I may have missed ? I followed your video exactly as you instructed. Thanks!
@@spudnickel4279 without seeing your model, I cannot tell what went wrong. what kind of not working? doe it not flow or it flow in wrong direction or something else?
@@PJChenJewelryDesign it doesn't flow at all. Nothing happens after i click on the bangle to get the texture on it. I am not sure what is going on. it is probably a rookie mistake, but I just can't figure it out.
@@PJChenJewelryDesign I got it! It WAS a rookie mistake. I wasn't selecting the objects in the correct order. I didn't realize there were 3 steps in the flowalongsurface command and I was selecting the organic element along with the surface below it at the same time.
Rendering is to show what it look. you can have reference image for showing the scale. for example ring on a hand or necklace on the neck. I also render top, front, side view and add the dimension notation on it to show what exact size the model is.
not sure if I get your question right. if you are asking how to find the naked edge. You can go to analyze the edge. it will show naked edges on your model.
@@PJChenJewelryDesign When the union failed at 7:27, the wrong part was displayed as a number, so I asked how it was done. Sorry for asking so many times
I change it thicker for demo purpose so student can see it better. You can change it at Option-View-Display Modes and depends on which mode you want to change. then go to the mode then pick object -curves
I know im randomly asking but does someone know of a trick to get back into an Instagram account? I stupidly forgot the password. I would appreciate any tricks you can give me.
@Drake Amir i really appreciate your reply. I found the site thru google and Im trying it out now. Looks like it's gonna take a while so I will reply here later with my results.
I needed more then two hours to follow this but the result (and the technique) is amazing! Thank you ❤
Glad it helped!
I hated learning rhino in my Uni courses but Videos like this are so motivating and way better for learning! Thank you so much for this content!
You are very welcome. Glad I can help
AMAZING! You opened me an entire world in rhino, THANK YOU SO MUCH
My pleasure!
Brava PJ!
Super!
That was a fantastic tutorial thank you PJ~
Very welcome
Then what's next? I finished making the design, how should I export it or what should I do in order to 3D print it? Great video by the way, extremely useful and educative.
You can use command export to stl file
you are the best man , appreciate you
Happy to help
Thank you very much. I have never used this technique. Very useful!
Great to hear!
Hi great video! How do you measure the ring, if it's the right size for the finger?
Most of the jewerly store has ring sizer. or you can use a strip of paper and wrap around the finger. The lengh will be the circonference of the ring.
Great teaching 👍
Thank you! 😃
Thank you very much !
You are welcome
Oh, grasshopper:)
grasshopper will be great for this application as well.
Maste you are always the best🙏❤️
Thank you!
very useful men thx!
glad you like it
Super 💕👌
Super
great job! thank you
You are welcome
Do you have any tutorials about how to make sure our files are ready for 3d printing? I managed to make a pieces using your tutorials and am about ready to send them to a printing house and then getting them molded and cast. I just want to be prepared. Thanks!!
You can check out this video ruclips.net/video/uihBtSNEcNA/видео.html
@@PJChenJewelryDesign Thank you! I tried to follow this tutorial but i could not get the pattern to flow along the surface. I tried to follow your troubleshooting video for FlowAlong Surface issues, but it still hasn't resolved. Are there any steps that wouldn't be obvious to beginners like me that I may have missed ? I followed your video exactly as you instructed. Thanks!
@@spudnickel4279 without seeing your model, I cannot tell what went wrong. what kind of not working? doe it not flow or it flow in wrong direction or something else?
@@PJChenJewelryDesign it doesn't flow at all. Nothing happens after i click on the bangle to get the texture on it. I am not sure what is going on. it is probably a rookie mistake, but I just can't figure it out.
@@PJChenJewelryDesign I got it! It WAS a rookie mistake. I wasn't selecting the objects in the correct order. I didn't realize there were 3 steps in the flowalongsurface command and I was selecting the organic element along with the surface below it at the same time.
Amazing
Thanks
Thank u so much!
You're welcome!
THANKS,MASTER !!!!
You are welcome!!
Hi Chen, can u pls show us what shrunk surface command do?.
And also does it affect flow along surface....
shrunk surface? or do you mean ShinkTrimSurface
Thank you so much.
You're welcome!
Very nice👏🏻👏🏻👏🏻🔥
Thanks 🔥
Thanks ...so mutch
Most welcome
Very very nice mam will u pls let me know what are the uses of drape.height field and rib. Pls. Thanks again
mostly for texture. I do have videos for them on my channel. check out the texture playlist
can you show us how to render an orignal pice with its actual size example
i create 1inch pandent and render then i compare both size it different????
Rendering is to show what it look. you can have reference image for showing the scale. for example ring on a hand or necklace on the neck. I also render top, front, side view and add the dimension notation on it to show what exact size the model is.
Great thank you ! Would be interested in a subd version of this :)
Working on it!
Hi ma'am.. hope you are doing well.. please tell me . how to make dripping designs.?
I am not sure what exactly that is but you can check out this video. ruclips.net/video/_hcPNpSE9JE/видео.html
How do I set the setting to display problematic parts when boolean union?
not sure if I get your question right. if you are asking how to find the naked edge. You can go to analyze the edge. it will show naked edges on your model.
@@PJChenJewelryDesign
When the union failed at 7:27, the wrong part was displayed as a number, so I asked how it was done. Sorry for asking so many times
@@이성범-j1e the boolean failed because the seams were aligned. You just need to move a little to avoid the seams being aligned.
Thanks
Welcome
very usefull👌👌
Glad to hear that
Thanks you❤️❤️
Welcome 😊
Is the monthly membership fee 75 Taiwan dollars or US dollars?
4.99 US Dollars
How do you get your curve lines so thick?
I change it thicker for demo purpose so student can see it better. You can change it at Option-View-Display Modes and depends on which mode you want to change. then go to the mode then pick object -curves
there is new subD pipe should works here ...let me know if it works for You Chen;)
yes, subD is great for this application as well.
i think you had Nearly tangent surfaces in those pipes its just guess but i bet if you made the pipes without caps it would have joined better
I will check on that. thanks
When r we going to learn Rhino 7.... this bangle could have been done in 7
yes, subD and grasshopper will be great option for this type of design as well.
Great tutorial, thank you! I think I will try to design mine with voronoi in grasshopper and turn it into a claw ring!
That's a great idea! Let me know how it comes out!
I know im randomly asking but does someone know of a trick to get back into an Instagram account?
I stupidly forgot the password. I would appreciate any tricks you can give me.
@Jace Kyle instablaster =)
@Drake Amir i really appreciate your reply. I found the site thru google and Im trying it out now.
Looks like it's gonna take a while so I will reply here later with my results.
@Drake Amir it worked and I now got access to my account again. Im so happy:D
Thanks so much you saved my ass !
tanks 👏👏👍
Welcome 👍
adamsın !!!!!!! broooo
This is a basics work .do some others
You are welcome to check my other videos.
有点像中国古代的窗子
really? which pattern. love to know
@@PJChenJewelryDesign 像这样：images.app.goo.gl/iv8etGR4i1MBiNvy9
小时候看古装剧都喜欢那种规则的（对称的，方正的，呈周期性的）窗格：images.app.goo.gl/Ni29A7VNEj7CB8ZJ6
等到念大学的时候突然发现这种不规则的也很有别样的美感！特别是阳光透过窗格打在窗户纸或者庭院另一面粉墙上形成的斑驳光影，是一种很美好的回忆。