இந்த இரண்டு ஆண்டுகள் பழமை y axis and then send to you t o y un u ற் உள்ள கட்டணங்களை காணவும் என்று சொல்லி அவள் மேல் தமிழ் அகராதி சீனம் அகராதி ஆன்லைன் விளையாட்டு இரவு விடுதியில் r
He makes nice enough pieces by he throws away so much time the way he does things. He could have simply carved the ring out of wax, used that wax to create a silicon mold and then anytime he needed a similar ring he could just inject some wax into the mold, then use that to cast the ring that just needs cleanup work and final engraving. Instead, he spent days just creating the ring before he ever got to the cleanup and engraving.
hi baronstone, no offence but I think slow is beautiful... the traditional way is interesting, I am intrigued by the making process and I have been watching Alberto videos cos I enjoyed watching the whole process :) Every ring is different, that is why it is custom made. I would hve bought off from any shop if I want something from a silicone mold.
You probably dont give a damn but does anybody know a tool to log back into an Instagram account?? I was stupid forgot the password. I appreciate any assistance you can offer me
@Trenton Rafael thanks so much for your reply. I found the site thru google and im trying it out atm. Seems to take quite some time so I will get back to you later with my results.
Relic? That Cavallin model M. 100/55 is less than forty years old, I know, I have one purchased in 1983. If you you want to talk relic I have an Oliver from 1920 and a Crocker flat mill that that is twenty years older. Then again maybe I am the relic, forty years at the bench here.
I love your engraving, as for the making of the ring i'ts not very professional the reason it has too many joints and I'm very surprised it didn't collapse on soldering, it would have been better and quicker if you made a round tube first and then cut out the inside dome and as for the top-plate it should have been soldered on the top of the ring not inside because then you would see the soldering line around the top of the ring.
A pity with this customer's order. Nothing on top of the ring engraved, left blank. Question begs is there any meaning intended for no design or initials on it?
From scratch scratch most impressive. Was that a soft stone block that you made the depression in? I never thought of using that. I liked the way you put it together. Always a treat watching you Sir.
Quick Question: I am having a custom Signet ring made with 18K as well as this. I want it solid, and I notice it was always your plan to leave the underside "hollow" instead of solid 18K...why? Thanks
ИМХО . У чувака есть лазер ,для нанесения рисунка..., но раскрой он делает от фонаря "под напильник"??? Может это"" латунь ? или "Зло" валяется под ногами ?? еще раз ИМХО .
hi sir, thank you very much! chevalier is a pinky ring, with a facade in which the stamp for lacquer wax was engraved, today they are also made with special characteristics
Talk about taking the long way around! I mean the final product looks nice, but why didn't you just cast the ring instead of cutting it out of multiple parts and then spending hours bending it to shape before soldering it? All you had to do was carve the ring out of wax first, then cast it normally. That way you do not have any joints to solder, you just have to use a file to clean up the edges after casting it. The way you made it did not make it easier to engrave, all it did was create multiple potential points of failure. I mean do you not know how to do lost wax casting or do you not own the equipment to do it that way? I find it hard to believe that you can't afford the equipment to do it if you don't have it. So why do things the hard way when you could literally save yourself a day of work by creating the ring from wax and then casting it? Heck you would be better off creating it out of wax and then making a silicon mold that can be injected with wax to save time in the future if you need to make another one. So why do things the way you are?
You seem very interested in saving time, so much that I am afraid that you cannot understand that some goldsmiths do not care about it. It is unimportant. What we try to do is to make a product in the best way possible. And casting is never that. It is, for the most part, just shit.
He probably spent less than a day making this, so while you were waiting for the the burnout oven to finish he was done. By the way a hand made (fabricated directly in metal) piece of jewelry is superior to a casting in every way.
@@dordiwesterlund2528 A cast ring would be much more structurally sound than having multiple solder joints. Obviously, he's not opposed to taking shortcuts, since he uses a laser engraver.
Cerchi sempre la perfezione nell'esecuzione e nel design. Questo richiede non solo l'abilità di un maestro orafo ma l'anima di un artista.
இந்த இரண்டு ஆண்டுகள் பழமை y axis and then send to you t o y un u ற் உள்ள கட்டணங்களை காணவும் என்று சொல்லி அவள் மேல் தமிழ் அகராதி சீனம் அகராதி ஆன்லைன் விளையாட்டு இரவு விடுதியில் r
As ever... such beauty... such time served skill... Fabulous..
This is a Beautiful piece, awesome!! Mr Alberto is a creator with his master pieces, I m so honoured!
He makes nice enough pieces by he throws away so much time the way he does things. He could have simply carved the ring out of wax, used that wax to create a silicon mold and then anytime he needed a similar ring he could just inject some wax into the mold, then use that to cast the ring that just needs cleanup work and final engraving. Instead, he spent days just creating the ring before he ever got to the cleanup and engraving.
hi baronstone, no offence but I think slow is beautiful... the traditional way is interesting, I am intrigued by the making process and I have been watching Alberto videos cos I enjoyed watching the whole process :)
Every ring is different, that is why it is custom made. I would hve bought off from any shop if I want something from a silicone mold.
@@Baronstone cast jewellery is not comparable to hand forged jewellery. Hand forged pieces are more robust, no porosity issues
@@Baronstone Do some research on fabricated versus cast, cast is stronzo!
Another top creation, you have inspired me to get back to my bench
You probably dont give a damn but does anybody know a tool to log back into an Instagram account??
I was stupid forgot the password. I appreciate any assistance you can offer me
@Kannon Shane instablaster :)
@Trenton Rafael thanks so much for your reply. I found the site thru google and im trying it out atm.
Seems to take quite some time so I will get back to you later with my results.
@Trenton Rafael It worked and I finally got access to my account again. Im so happy:D
Thanks so much you really help me out!
@Kannon Shane No problem :D
One more awesome handmade work! With the symbol of the Chinese zodiac for rooster. ;-)
I have Parkinson’s Disease and shake like a leaf, I can just see me trying to make one of those.
😂😂😂
which is certainly an extraordinary result.
Beautiful ring and an excellent job making it!!!
Enjoyed your video and I gave it a Thumbs Up
Люблю смотреть когда люди работают!респект!
I just love that old rolling mill! Relic!
Relic? That Cavallin model M. 100/55 is less than forty years old, I know, I have one purchased in 1983. If you you want to talk relic I have an Oliver from 1920 and a Crocker flat mill that that is twenty years older. Then again maybe I am the relic, forty years at the bench here.
Awesome job!
Felicitaciones maestro
I love your engraving, as for the making of the ring i'ts not very professional the reason it has too many joints and I'm very surprised it didn't collapse on soldering, it would have been better and quicker if you made a round tube first and then cut out the inside dome and as for the top-plate it should have been soldered on the top of the ring not inside because then you would see the soldering line around the top of the ring.
briefly nice comment, i liked the point " i'm very surprised it didn't collapse on soldering" 😃
Bello trabajo, gracias 🤩
Un anillo muy bonito , felicidades
Good Job scaffoal ,
great job !
Use paper or plastic to separate the lead from the gold, because you end up poisoning the gold
@Filigranas precolombinas moreno Mosquera si lo se , pero cuando limas despues de usar el plomo te puede caer plomo en la limadura . saludos
I support very special making by hand and good job for life
Nice one Alberto ! I want to ask what type of laser do you have?
That was a lot of extra work.
magnifique you are a master
i love you work
thank you!!
Really nice!!
Excelente ¡Bravo! Y cuánto será su precio en 7 gr de peso?? Oro 18 k
Pure art.
Nice job Friend
Good job
You should do the ring off of The Irishman.😁
Dude you're such a god
Very good
excellent work very beautiful chevalier!!!! are you using 18k solder ?
How can a buy one ring excatly like that? That's so precious ring, beautiful work!
thank you! for info write to: info@scaffoal.it
A pity with this customer's order. Nothing on top of the ring engraved, left blank. Question begs is there any meaning intended for no design or initials on it?
Muy buen video del anillo sellado👋
Wonder full sir
How many grams lost while made 1 ring?
¡¡W🤩🤩🤩W!! Gracias por el video. 😎👍
nice work
Belo clássico da ourivesaria!
Why do you cut two separate pieces for the ring instead of one piece
Why not make the Ring from one piece of metal, and bend round ?
How thick is the gold? 2mm?
Saludos desde 🇦🇷
عمل رائع احسنت يا استاذ
Que hermoso 😀, maestro que medida de lamina usaste por favor. Gracias
gracias, utilicé una placa de 1,80 mm.
Bonito anel masculino Chevalier.
Buenad noches amigo cuantos gramos pesa ese modelo de anillo amigo?
I want one!
From scratch scratch most impressive. Was that a soft stone block that you made the depression in? I never thought of using that. I liked the way you put it together. Always a treat watching you Sir.
thanks
looks like a lead block
Это титанически труд😳 результат выше всяких похвал🥰
Quick Question: I am having a custom Signet ring made with 18K as well as this. I want it solid, and I notice it was always your plan to leave the underside "hollow" instead of solid 18K...why? Thanks
I think to save gold, less gold...less $$$...(?)
ИМХО . У чувака есть лазер ,для нанесения рисунка..., но раскрой он делает от фонаря "под напильник"??? Может это"" латунь ? или "Зло" валяется под ногами ?? еще раз ИМХО .
About how much to make a ring like this?
Красота.
What does Chavalier mean? Please... Love your work as always! 🍀
hi sir, thank you very much! chevalier is a pinky ring, with a facade in which the stamp for lacquer wax was engraved, today they are also made with special characteristics
This is how the high value of piece of art.
High rollers should into something like this instead a Cad Cam 3D. No value of art. Don't you think??
Hola q tal Soy joyero y te almiro bastante Algun dia voy a trabajar igual que usted
¡Muchas gracias! Estoy bien, espero que tu también estés bien!
Chinese customer?😉 Also, do you use diamond saw blades, or regular steel ones?😊
regular steel
6قال إنه بقدر ما تكون لعبة T على الإنترنت ، فإن المحاصيل المزروعة هنا هي علم دائرة تجمع الهند في ولاية أوتار براديش ، لكنها كذلك
А теперь на аффинаж! 🙃
good
Good
thank you
🙂🙂
Eu faço igual, vão não faço o bordado, deixo pra outro fazer sai melhor e não toma o meu tempo. Mas ficou top👍🏽👍🏽👍🏽👍🏽👍🏽
Beautiful outcome, but a lot of wasted stock. A better template would yield less waste of gold.
why put music :(
I want to make my name locket how i I am contact with you please urgent..
0:27 how?? You literally just cast a gold bar and you flick it out the mold with your bare finger??
🌹🌹🌹🌹🌹👌👌👌👌👌👏👏👏👏👏
thanks!
👍👌🌹🌹🌹🌹🌹🌹🌹🌹
thanks!
Price?
for info write to info@scaffoal.it, thanks for watching the video!
🌹🌹🌹👏👏👏👏✋✋✋✋
thank you
Hii
hi!
西←West ...(´･ω･`) Dumb ...
Talk about taking the long way around! I mean the final product looks nice, but why didn't you just cast the ring instead of cutting it out of multiple parts and then spending hours bending it to shape before soldering it? All you had to do was carve the ring out of wax first, then cast it normally. That way you do not have any joints to solder, you just have to use a file to clean up the edges after casting it. The way you made it did not make it easier to engrave, all it did was create multiple potential points of failure. I mean do you not know how to do lost wax casting or do you not own the equipment to do it that way? I find it hard to believe that you can't afford the equipment to do it if you don't have it.
So why do things the hard way when you could literally save yourself a day of work by creating the ring from wax and then casting it? Heck you would be better off creating it out of wax and then making a silicon mold that can be injected with wax to save time in the future if you need to make another one. So why do things the way you are?
You seem very interested in saving time, so much that I am afraid that you cannot understand that some goldsmiths do not care about it. It is unimportant. What we try to do is to make a product in the best way possible. And casting is never that. It is, for the most part, just shit.
He probably spent less than a day making this, so while you were waiting for the the burnout oven to finish he was done. By the way a hand made (fabricated directly in metal) piece of jewelry is superior to a casting in every way.
Yeah, that was an insane amount of work for a ring that would have been very easy to cast.
@@dordiwesterlund2528 A cast ring would be much more structurally sound than having multiple solder joints. Obviously, he's not opposed to taking shortcuts, since he uses a laser engraver.
@@DegreesOfThree Nonsense.
That's the pope's ring
A very hard gold smith# @youtubefemost channel#valentincatabay# wathing# video# femost# gold smith#
Good job
أحسنت قمت الروعه يافنان
شكر كثيرا