Signal flow loop can you explain from probe to rack ..I am new in instrumentation industry I want to know from basics ..your video is very informative..thanks
Hello .i have problem .i need help pleas During the data upload operation from the rack to the PC, we noticed that only the TDI card displays data, while the other locations (slots) remain inexplicably empty. This observation raises concerns about the integrity and recovery of data stored in other rack locations. Attempting to download the program to the rack encountered a major obstacle due to the mismatch between the virtual slots (blue) and physical slots (green) relative to the TDI board. The TDI card is designed to interface with physical rack slots, but due to this incompatibility, the download process remained unsuccessful
Very useful information. Thanks for your videos. Also explaination an english very useful...pl make video about key phasor working concept and practical explanation...
No. There are different probes and also proximitters are used to measure axial vibration as compared with position monitor probes/ proximitters. Position monitor is used to measure the differential expansion, casing expansion etc. Usually 8mm probe is used for axial vibrations, axial displacement and 11mm probe for differential expansion. LVDTs are used for casing expansion measurements.
@@teaminstrumentationcontrol4006 Thanks.. Thank you very much... Casing expantion, diffrential expantion is only for steam turbines right ??. In my plant GE gas turbine.. There is no that types of sensors.. if you dont mind please more details. Atleast give the manufacturer name and model number of that sensor..
@@suhailsulaiman6133 the case exp and diff exp. are for steam turbine, why? because that kind of machine, the rotor and the case, expand for the temperature of the steam flow trouhgt the entire machine. steam turbine suffer expansion during the start up and the loading process.. you can find many kind of sensor most popular, bently nevada..
It is not interesting to upload the theoretical video, when our Steam Turbine maintenance will be carried out at that time I will definitely prepare one video on above topic. Thank you Team Instrumentation & controls.
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
We don't have 3500/93 module on site, still we will try to provide the info regarding what are the options available in this module through a therotical video.
It will increase the signal setpoints by the multiplying it with th TM value & its mostly required during startp. However, the change shoudnot exceed the bearing clearance.
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
Signal flow loop can you explain from probe to rack ..I am new in instrumentation industry I want to know from basics ..your video is very informative..thanks
Hello .i have problem .i need help pleas
During the data upload operation from the rack to the PC, we noticed that only the TDI card displays data, while the other locations (slots) remain inexplicably empty. This observation raises concerns about the integrity and recovery of data stored in other rack locations.
Attempting to download the program to the rack encountered a major obstacle due to the mismatch between the virtual slots (blue) and physical slots (green) relative to the TDI board. The TDI card is designed to interface with physical rack slots, but due to this incompatibility, the download process remained unsuccessful
Good post sir.
Here , 3500 system used barrier sir. Or not sir. please reply me sir.
Very useful information. Thanks for your videos. Also explaination an english very useful...pl make video about key phasor working concept and practical explanation...
Thanks. Will try to make the video in future.
Very helpful video, Please make a video on BN key phasor. Thanks
Thank you very much... Sir, i want know regarding position monitor.where is this using ?? Is this same as axil vibration?
No. There are different probes and also proximitters are used to measure axial vibration as compared with position monitor probes/ proximitters. Position monitor is used to measure the differential expansion, casing expansion etc. Usually 8mm probe is used for axial vibrations, axial displacement and 11mm probe for differential expansion. LVDTs are used for casing expansion measurements.
@@teaminstrumentationcontrol4006 Thanks.. Thank you very much... Casing expantion, diffrential expantion is only for steam turbines right ??. In my plant GE gas turbine.. There is no that types of sensors.. if you dont mind please more details. Atleast give the manufacturer name and model number of that sensor..
@@teaminstrumentationcontrol4006 How to renew the program? proqram is zip. please help
@@suhailsulaiman6133 the case exp and diff exp. are for steam turbine, why? because that kind of machine, the rotor and the case, expand for the temperature of the steam flow trouhgt the entire machine. steam turbine suffer expansion during the start up and the loading process.. you can find many kind of sensor most popular, bently nevada..
How do you adjust 2 axial probes and how many voltage?
Nice overview.
Can u cover vedio on systems software, showing & interpreting readings & graphs.
ruclips.net/video/Pg4FMsWLnRg/видео.html this video can give you some idea. Watch it
Sir eska vibration bypass kaise karte
Sorry, bypass led what is it?
Bhai kya aap vibration probe for ( displacement ) response check and linear check ka video upload karo gye
It is not interesting to upload the theoretical video, when our Steam Turbine maintenance will be carried out at that time I will definitely prepare one video on above topic.
Thank you
Team Instrumentation & controls.
Hallo, how to proof test the relay? thanks
Excellent 👌
thanks for sharing information
How to clear byapass module
Thanks bhai
Can u show red color on Power supply module.
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
What price
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
Kindly make a vedio on display interface module. 3500/93
We don't have 3500/93 module on site, still we will try to provide the info regarding what are the options available in this module through a therotical video.
Sir, we are PLC/DCS company in China. If you need any model, you can contact us. Whatsapp: +86 18059275924
What is the function of trip multiplayer
It will increase the signal setpoints by the multiplying it with th TM value & its mostly required during startp. However, the change shoudnot exceed the bearing clearance.
Thanks sir
Nice ...
Thank you & keep supporting.
Good information but the background noise is too much
Needs step's to replace 3500/50 model
you need to buy the last tach model. and try to use the last version of the 3500 config sw...
Hi sir pls explain deeply
Hi,
This is the overview part as suggested in video title.
Thank You,
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
Sir I want talk to you sir
Send me E male id I want to contact u sir
Hi All,
For any query, help or suggestions you can communicate me on shivkumar.chirde@gmail.com
Thank you.
i can help you if you want. my e-mail alberto.alarconn@gmail.com
i can help you want, alberto.alarconn@gmail.com
Hi, we are PLC/DCS company in China. If you need any model, you can contact us. We'll send you quotation. Whatsapp: +86 18059275924 email: nelson@nseauto.cn
How do you put the sensors at bypass? If you have to work at 1 bearing?
You need to use the utilities seccion of the sw, choose software switches and select which one you wanna bypass, alarm or channel..