oh there were multiple factor causing this while I test it afterwards: Hopup rubber is chipped off, 4 BBs went crashing up towards the inner barrel instead of inside the barrel, swapped to a old maple leaf 60 and it's fine The nozzle oring apperently snapped as well causing the nozzle to unable to push back all the way causing gas "explosion", swapped oring and it's all smooth now Buffer spring guide kept unscrewing itself (don't know how it will affect the gunbut it probably would) added locktite and it seems to stay fine.
@@kenba96 Heya, just a quick update if you still wanted to know, turns out the Ratech nozzle is the main issue, causing all these issues mentioned above. Changed back to stock VFC gen3 nozzle seemed to fix everything. (I will make a gameplay of the fixed gun soon with lol)
@@Airsoft_Ricky In my experience with VFC's 416A5, if you have a gen3 VFC or one that is running V3 internals please don't downgrade to ratech or z-parts internals, the slight difference in tolerances and materials used will wear and break other parts or your replica. I've had double feeding and tearing of the hopup rubbers because of a zparts bolt. A metal ratech nozzle actually scuffed up my magazine feed lips and destroyed the plastic guide of the hopup unit where the nozzle feeds into. The stock internals are pretty amazing out of the box and really well balanced for the Gen3's imo The only upgrades I found to be really worth it is a TNT S+ hopup/barrel combo and a real steel tungsten filled buffer (ST-T1)
So it seems you’ve got some bad bolt bounce going on get yourself an h2 buffer weight and boom problem will be gone Iv run my bcm for 3 years tough now and love it currently waiting on my last upgrade part and that the 4uad smarter airsoft gbbr bucking they’ve made shoot have my baby shootin lasers out to 300ft
Turns out it was just the RAtech nozzle being trash and runing everything inside the gun. Swapping it back to stock V3 nozzle and it work wonders. Also swapped back to 2016 maple leaf hopup fixed some feeding issues
@@Airsoft_Ricky I was referring to the double feeding and losing a bb sometimes out your ejection port vfc buffer isn’t the greatest and creates some of those issues as well Iv found out but swapping to a real steal 3.5 oz or 4.5 oz buffer will do ya wonders my dude and actually makes the rifle a tad bit quieter
Lotta mws fan boys here lol sick video my dude the vfc gen3 gbbr lines are top tier Iv got 20 plus k run through mine with very little changes to the build changed the buffer weight the barrel and the bucking and mine shoots dimes out to 250 ft also switch to a npas nozzle vfc one not ra tech fuck ra tech lol
Good stuff 👌 I use an upgraded WE 416 currently as my gbbr. So far it’s been quirky but overall solid. Also did I see a Magpul MS3 sling on your rifle? Cause that’s what I use as well lol
i got a we m4 and so far has been great, i've admittedly been using primarily 3.0 gas so it was shooting almost way too hot for my local field, at the moment i'm trying to turn it down but it's been a fantastic gun.
Why did the gas come out the rifle whilst trying to shoot i don’t know that much about gbbr guns and im planning on branching into it just wanna know??
Overgassing it will cause that issue when shooting normally. But in my case, the bb jammed the whole hopup unit, so the nozzle can't sit in all the way but the hammer has been reset. So the gas just spills out but not into the nozzle but outside instead when I pull the trigger
@@Airsoft_Ricky Oooh ok. So In that case was it due to improper lubricant on or simply the bb tumbled and got stuck?? Either way thanks for the explanation 👍
@@lordrothschild7021 My friend swapped in a RA-tech magnetic nozzle in before giving it to me, that nozzle itself caused a lot of problems. I switched back to the stock V3 nozzle and it works as it should! So not changing a single thing would be the best bet. (Perhaps the hopup rubber and inner barrel, that's all)
You don’t know how to correct minor issues that’s why you went back lol Iv got well over 20k bb put through mine and changed nothing really except barrel bucking and buffer weight I run it in sub 20 degree f weather and still no issue just use a little more powerful gas and always run lubricant free gas if you can my dude and she’ll treat you right
False there are many issues with the mauri mws one being if you live in the states you’ve gotta immediately change the nozzle return spring that’s just to have it be playable here without breaking on you 100 shots in
@@beandon0917Iv mos def got this outer barrel wobble you speak of two ways to fix it both pretty easy one being zipp ties and the other being barrel nut spacers which take up that little bit extra space snd make the barrel but a little tighter went this route but used zip ties in the moment and my baby was shooting lasers no issues
![Fireteam Charlie [Squad Short Film 4K]](http://i.ytimg.com/vi/V3e1FtB-Ncw/mqdefault.jpg)
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Who taught this guy how to peak corners lol. He been watching to much John wick🤣
Where?
Clearly you have never had a fettuccine alfredo
Laughs in mws
My mws has not worked consistently in 2 years. My mpx is the only flawless gun I own.
Nothing against tm. Just want fun gun to be fun
Real
@@ronin_smuprolly shldve taken care of it. if your not cleaning it every shot it’s not gonna work
youve gotta field strip it after the second failure xD
XD
Snap it in half and hold a funeral
wait a minute.....
Bro, you have very nice gun handling!
You feel the gun, i See IT
And Also your mates know to Position, nice gameplay
Thank you! I hope "it" didn't scare you
Awesome video dude, Man I need to branch off into GBB, AEG only over here lol
oh yes you should! We had a blast with GBB only game here Everybody's serious in ammo count that day 😂
VFC? VFC MOMMENTTTTT
The barrel on my BCM came loose ://
1:10 my man literally ejected the round what da
REALISMMMMMM
that double leak at 2:30
XD
Once you got it fixed, it seems to work well!
My foking VFC SR16 has no pop up that makes it fall out from barrel if pointed down
Do you know how to adjust it?
this was a funny video lol new sub
Thanks man!
looks like you might have a bounce on the bolt that fuck up the position when fiering allso a hint to that is the dubble feed you see on semi
oh there were multiple factor causing this while I test it afterwards:
Hopup rubber is chipped off, 4 BBs went crashing up towards the inner barrel instead of inside the barrel, swapped to a old maple leaf 60 and it's fine
The nozzle oring apperently snapped as well causing the nozzle to unable to push back all the way causing gas "explosion", swapped oring and it's all smooth now
Buffer spring guide kept unscrewing itself (don't know how it will affect the gunbut it probably would) added locktite and it seems to stay fine.
@@Airsoft_Ricky Jesus dude. That is a casked for bad luck. But nice to know the symthomes
@@kenba96 Heya, just a quick update if you still wanted to know, turns out the Ratech nozzle is the main issue, causing all these issues mentioned above. Changed back to stock VFC gen3 nozzle seemed to fix everything. (I will make a gameplay of the fixed gun soon with lol)
nice to know thank you
@@Airsoft_Ricky
@@Airsoft_Ricky In my experience with VFC's 416A5, if you have a gen3 VFC or one that is running V3 internals please don't downgrade to ratech or z-parts internals, the slight difference in tolerances and materials used will wear and break other parts or your replica. I've had double feeding and tearing of the hopup rubbers because of a zparts bolt. A metal ratech nozzle actually scuffed up my magazine feed lips and destroyed the plastic guide of the hopup unit where the nozzle feeds into. The stock internals are pretty amazing out of the box and really well balanced for the Gen3's imo
The only upgrades I found to be really worth it is a TNT S+ hopup/barrel combo and a real steel tungsten filled buffer (ST-T1)
bro wee need a vidéo about your headgear setup, i can spot a c50 gaz mask with a black gsgm and anvis 10, we need to see it
Well you got everything right on my helmet! Perhaps I may show them in the future
So it seems you’ve got some bad bolt bounce going on get yourself an h2 buffer weight and boom problem will be gone Iv run my bcm for 3 years tough now and love it currently waiting on my last upgrade part and that the 4uad smarter airsoft gbbr bucking they’ve made shoot have my baby shootin lasers out to 300ft
Turns out it was just the RAtech nozzle being trash and runing everything inside the gun. Swapping it back to stock V3 nozzle and it work wonders.
Also swapped back to 2016 maple leaf hopup fixed some feeding issues
@@Airsoft_Ricky I was referring to the double feeding and losing a bb sometimes out your ejection port vfc buffer isn’t the greatest and creates some of those issues as well Iv found out but swapping to a real steal 3.5 oz or 4.5 oz buffer will do ya wonders my dude and actually makes the rifle a tad bit quieter
Lotta mws fan boys here lol sick video my dude the vfc gen3 gbbr lines are top tier Iv got 20 plus k run through mine with very little changes to the build changed the buffer weight the barrel and the bucking and mine shoots dimes out to 250 ft also switch to a npas nozzle vfc one not ra tech fuck ra tech lol
VFC BCM lol 上槍身做低左 飛機做厚左 灰匣匣頂做高左 即係頂住隻飛機 每次扣隻飛機都要磨住隻匣頂 久而久之一係飛機收皮爆氣 一係撞針磨到花哂卡住槍都開唔到🥲 之前有把 執到傻 冇耐性繼續執放左
VFC is gun easy to fix and isn't complicated. Not like MWS toy.
Good stuff 👌 I use an upgraded WE 416 currently as my gbbr. So far it’s been quirky but overall solid. Also did I see a Magpul MS3 sling on your rifle? Cause that’s what I use as well lol
Nice! I like 416s, and yes it is a MS3 sling!
i got a we m4 and so far has been great, i've admittedly been using primarily 3.0 gas so it was shooting almost way too hot for my local field, at the moment i'm trying to turn it down but it's been a fantastic gun.
wow wonderful :D i like that baby
i love gas guns! ^_^
Why did the gas come out the rifle whilst trying to shoot i don’t know that much about gbbr guns and im planning on branching into it just wanna know??
Overgassing it will cause that issue when shooting normally.
But in my case, the bb jammed the whole hopup unit, so the nozzle can't sit in all the way but the hammer has been reset. So the gas just spills out but not into the nozzle but outside instead when I pull the trigger
@@Airsoft_Ricky
Oooh ok. So In that case was it due to improper lubricant on or simply the bb tumbled and got stuck??
Either way thanks for the explanation 👍
@@lordrothschild7021 My friend swapped in a RA-tech magnetic nozzle in before giving it to me, that nozzle itself caused a lot of problems. I switched back to the stock V3 nozzle and it works as it should! So not changing a single thing would be the best bet. (Perhaps the hopup rubber and inner barrel, that's all)
@@Airsoft_Ricky
Thanks for the info
thats what you get for buying VFC, not sure what you expected
Fixed it by reverting the parts back to stock, it's all good now
Vfc baby😀
try a lightweight bolt my firend... i use one inmy Poseidon sniper and it makes the vfc system run amazing... I am also a Rickey lmao
RIP
thats why i abondon my vfc and pick up a ghk
You don’t know how to correct minor issues that’s why you went back lol Iv got well over 20k bb put through mine and changed nothing really except barrel bucking and buffer weight I run it in sub 20 degree f weather and still no issue just use a little more powerful gas and always run lubricant free gas if you can my dude and she’ll treat you right
Told u guys Marui is the best 😂
False there are many issues with the mauri mws one being if you live in the states you’ve gotta immediately change the nozzle return spring that’s just to have it be playable here without breaking on you 100 shots in
Buy a TM MWS :-D
Check out my other video! I bought one recently in Hong Kong and it work wonders :D
@@Airsoft_Ricky Ah ok :-D
What mask do you use?
AVON C50 gas mask, painted like SCP overlord masks so you can see the white things on my mask
lmao i remember the first gbb thaty came to the US from we tech....... they suckedd
Is your BCM a gen 3?
Yep! They only release Gen3 for BCM MCMR
@@Airsoft_Ricky Ah ok does the outer barrel wobble since I heard it’s two pieces
@@beandon0917 It didn't wobble at all but the hopup grub screw will come loose overtime, needs blue locktite to secure the hop
@@beandon0917Iv mos def got this outer barrel wobble you speak of two ways to fix it both pretty easy one being zipp ties and the other being barrel nut spacers which take up that little bit extra space snd make the barrel but a little tighter went this route but used zip ties in the moment and my baby was shooting lasers no issues
What hop rubber was it that caused the issue?
2023ver Maple leaf 60degree silicone hopup
@@Airsoft_Ricky Oof I've got one of those ready to go into my mp7a1 maybe I will rethink it haha thanks
lol
why is the guy at the beginning doing a chamber check? hahaha so cringe