Altium Designer 5 Useful Design/Routing Tips
HTML-код
- Опубликовано: 26 ноя 2021
- Altium Designer 5 Useful Design/Routing Tips/tricks
==========================================
Free License of Altium: www.altium.com/yt/myvanitar
==========================================
Check other videos: bit.ly/2N9OlPa
==========================================
In this video, I talked about five different design and routing tips for Altium Designer. The first tip is about easy track selection/trace selection. The second tip is to modify the track width/trace width efficiently, both using the design rules and using the favorite interactive routing widths table.
The third tip talks about how to mirror/flip the component in the schematic document. the fourth tip talks about the angle of rotation in the PCB document. In the fifth tip, you will learn how to calculate the length of a track/length of the trace to estimate the current handling of the track/current handling of the trace.
-----------------------------------------------------------------------
Music by Atch
SoundCloud: bit.ly/AtchSoundCloud
Spotify: bit.ly/AtchSpotify
Instagram: / atchmusic
----------------------------------------------------------------------- Наука
Thank you for your input! It was of great help tp me.
You're welcome!
to select entire Net in the first tip try to hit Tab twice
Yes, thank you, that's another method. One way also is to simply click a part of the track on the desired layer and press the TAB key. Because basically, the TAB key works first on the pre-selected layer.
how you are selecting multiple trace manually, which you did in this video initially at 0.18sec
Shift + Mouse-Click on your desired tracks
@@MyVanitar thank you