Thank you! I’m half you’ve liked it! Valved exhaust was the only option for me as this exhaust isn’t really legal here 😅 you would be correct on the accent 👍 I’ve spent most of my life over in Ireland
I would honestly rather a car lift. What you don’t see in this video is me having to crawl like a sewer rat in order to get out because the manhole isn’t long enough. Could be nice for shorter cars or if the garage would be longer. With that being said, I’m happy that I have it instead of not having one at all. I should have my garage done with a car lift by the end of 2025
@@marcelk_98 oh yeah a car lift would be great, but they're also thousands, the way i see it is it's a fantastic compromise, much better than crawling under the car whiles it's on stands haha 🤣
@@rs4jolib717 when the valves are closed its quieter than stock. I’ve experienced no drone with valves closed. With valves open there is some drone when on low rpm in high gear under load (going up hill)
@ they should be changed anywhere from 70k-100k km. Mine were done at around 76k km I believe. I will need to double check. I don’t strain my car too much, but the next interval will probably be at around 150k km. I rather do them prematurely and sleep well at night
Zamówiłem z alibaby. Dodałem link w opisie. Musisz poszukać jeżeli chcesz jakiś inny. Dużo różnych wariantów jest na alibabie więc znajdziesz coś dla siebie
With the windows down I can really smell it, BUT I do have an exhaust leak because of the shitty clamps I got. I practically don’t smell anything when I put my windows up. I still have to put on a map for no cats and get better clamps or some liquid gasket to seal the exhaust properly. I don’t think it will smell as much as it does now, but it’s still alright. Honestly anything for that sound 😅
I'm catless. Was worried about the smell after reading the forums when I initially bought mine. But I ride around with the windows down pretty frequently and didn't smell anything when I first installed it and still dont 👌
Brzmi mega! tak z czystej ciekawosci jak jest z dolem w tych m3? faktycznie tak mega slaby? masz jakiegos znajomego albo moze ty masz porównanie z S5 4.2 albo tych starszych S4? Sam mam S5 i w przyszlosci chcialbym zrobic podmianke na wlasnie m3 e92 no bo nie ma chyba lepiej prowadzacego sie auta z v8 w takich pieniadzach
Z dołem czyli chodzi o korozję? Porównania do S nie mam, ale w m3 to tylne sanki przeważnie rdzewieje. Dyfer też w sumie jak i podpora wydechu. Powyższe elementy można zregenerować jeżeli korozja jest powierzchowna. U mnie m3 była garażowana i to było widać, ale jak już mi stanie garaż to będę chciał od spodu całą zrobić na nowo
@@marcelk_98 hahaha, z dolem chodzi o jezdzi na niskich obrotach. Bo z tego co wiem m3 cierpi na malo niuta z dolu i jak to u ciebie wyglada. Do przezycia?
@ nie jest źle jak pokazują cyfry. I tak na mieście masz jeden z szybszych samochodów. Też nie kupiłem go żeby się ścigać ale jak pociągniesz bieg do końca i zmienisz na wyższy to i tak jesteś już na tych 3k + obrotach więc jest trochę momentu. Mi to nie przeszkadza ponieważ kupiłem go dla frajdy z jazdy i dźwięku silnika. Mogłem wziąć f80/2/7 na przykład a i tak wybrałem e92 i tego bym nie zmienił
@@marcelk_98 glownie kieruje sie dzwiekiem tylko jak sie naogladalem tych filmikow z usa to w doslownie kazdym mowia o tym slabym momencie z dolu. Co by nie mowic to v8 przewaznie dol ma bardzo dobry
Ma niski dół w porównaniu do samochodów co oni tam mają. Aż tak bym się tym nie przejmował. Też śledziłem/ śledzę temat jak tam się wypowiadają ale tam jest inny świat motoryzacji
Whats the point in getting an M3 if you're gonna put this Chinese garbage on it..do that to a regular 330 or 335, car deserves more. No hate but that's just bad taste.
The manifests for all these manufacturers selling these exhausts is public info and if you look into it, you can see that virtually all these companies get these exhausts from the same supplier in china and mark it up 3-4k. Thats why the remotes and vacuum boxes are all the same. Besides, an exhaust is just pipes. It either lets the sound out or it doesn't regardless of where you get it
If it’s not made from scratch by most likely someone independent or a local company it’s definitely not perfect quality in terms of welds going through fully. It’s all machine made
very useful , lovely made it ! ⭐
Thank you! I really appreciate it! Once my garage will be done it will be much easier to make those videos with better quality 👌💪
You should be able to re-learn the remote signal to the OEM garage door opener buttons on the mirror. Buddy of mine did it to his.
@@ldadol I completely forgot this exists honestly. I’ll have to check it out! Thanks for that tip!
Sounds so freakin good
Damnnnnn didn’t expect to see you here! Thank you and it means a lot 🙏
Super sound from the exhaust, well done! Looks fantastic also. The best of both worlds, loud and quiet! I detect an Irish accent am I right?
Thank you! I’m half you’ve liked it! Valved exhaust was the only option for me as this exhaust isn’t really legal here 😅 you would be correct on the accent 👍 I’ve spent most of my life over in Ireland
I wish Australian garage had those manholes for working on car's like the UK does. Would be so convenient.
I would honestly rather a car lift. What you don’t see in this video is me having to crawl like a sewer rat in order to get out because the manhole isn’t long enough. Could be nice for shorter cars or if the garage would be longer. With that being said, I’m happy that I have it instead of not having one at all. I should have my garage done with a car lift by the end of 2025
@@marcelk_98 oh yeah a car lift would be great, but they're also thousands, the way i see it is it's a fantastic compromise, much better than crawling under the car whiles it's on stands haha 🤣
Stands are dodgy AF! To put the car up I’d ideally use 4 stands and like 2 jack stands
Hi mate. How is it on a long drive. is it droney with valves closed? thanks
@@rs4jolib717 when the valves are closed its quieter than stock. I’ve experienced no drone with valves closed. With valves open there is some drone when on low rpm in high gear under load (going up hill)
@ good to know! Will consider getting one. Thanks mate.
@ no problem! Thanks for commenting! 👍
@ only problem is I think it wont pass emissions here lol.
@ that’s true. Same here, I just swap it out 🤷♂️
Have you changed rod bearings or throttle actuators?
Previous owner has rebuilt throttle actuators on better components. He also done rod bearings. I still have a bit to go before having to do them
@@marcelk_98 same 😊
@@marcelk_98 How will you know that the rod bearings must be changed again?
@ they should be changed anywhere from 70k-100k km. Mine were done at around 76k km I believe. I will need to double check. I don’t strain my car too much, but the next interval will probably be at around 150k km. I rather do them prematurely and sleep well at night
Cześć, napisz prosze skąd zamawiałeś. Che tez kupić ten sam w titanium lub normalny.
Zamówiłem z alibaby. Dodałem link w opisie. Musisz poszukać jeżeli chcesz jakiś inny. Dużo różnych wariantów jest na alibabie więc znajdziesz coś dla siebie
Is the smell of being catless bearable for you?
With the windows down I can really smell it, BUT I do have an exhaust leak because of the shitty clamps I got. I practically don’t smell anything when I put my windows up. I still have to put on a map for no cats and get better clamps or some liquid gasket to seal the exhaust properly. I don’t think it will smell as much as it does now, but it’s still alright. Honestly anything for that sound 😅
I'm catless. Was worried about the smell after reading the forums when I initially bought mine. But I ride around with the windows down pretty frequently and didn't smell anything when I first installed it and still dont 👌
Brzmi mega! tak z czystej ciekawosci jak jest z dolem w tych m3? faktycznie tak mega slaby? masz jakiegos znajomego albo moze ty masz porównanie z S5 4.2 albo tych starszych S4? Sam mam S5 i w przyszlosci chcialbym zrobic podmianke na wlasnie m3 e92 no bo nie ma chyba lepiej prowadzacego sie auta z v8 w takich pieniadzach
Z dołem czyli chodzi o korozję? Porównania do S nie mam, ale w m3 to tylne sanki przeważnie rdzewieje. Dyfer też w sumie jak i podpora wydechu. Powyższe elementy można zregenerować jeżeli korozja jest powierzchowna. U mnie m3 była garażowana i to było widać, ale jak już mi stanie garaż to będę chciał od spodu całą zrobić na nowo
@@marcelk_98 hahaha, z dolem chodzi o jezdzi na niskich obrotach. Bo z tego co wiem m3 cierpi na malo niuta z dolu i jak to u ciebie wyglada. Do przezycia?
@ nie jest źle jak pokazują cyfry. I tak na mieście masz jeden z szybszych samochodów. Też nie kupiłem go żeby się ścigać ale jak pociągniesz bieg do końca i zmienisz na wyższy to i tak jesteś już na tych 3k + obrotach więc jest trochę momentu. Mi to nie przeszkadza ponieważ kupiłem go dla frajdy z jazdy i dźwięku silnika. Mogłem wziąć f80/2/7 na przykład a i tak wybrałem e92 i tego bym nie zmienił
@@marcelk_98 glownie kieruje sie dzwiekiem tylko jak sie naogladalem tych filmikow z usa to w doslownie kazdym mowia o tym slabym momencie z dolu. Co by nie mowic to v8 przewaznie dol ma bardzo dobry
Ma niski dół w porównaniu do samochodów co oni tam mają. Aż tak bym się tym nie przejmował. Też śledziłem/ śledzę temat jak tam się wypowiadają ale tam jest inny świat motoryzacji
Uuuuuu…..
Finally the video is out 😅
Whats the point in getting an M3 if you're gonna put this Chinese garbage on it..do that to a regular 330 or 335, car deserves more. No hate but that's just bad taste.
And you do realise that a lot of those branded exhausts come from China and just get companies logo slapped on
An exhaust is just metal pipes lol. That’s not a mechanical part. But if you want to pay $6k to have the same sound go for it 😂.
@@Parops facts. The companies that do slap their logo on make minor adjustments, but they aren’t worth $4000 extra
The manifests for all these manufacturers selling these exhausts is public info and if you look into it, you can see that virtually all these companies get these exhausts from the same supplier in china and mark it up 3-4k. Thats why the remotes and vacuum boxes are all the same. Besides, an exhaust is just pipes. It either lets the sound out or it doesn't regardless of where you get it
If it’s not made from scratch by most likely someone independent or a local company it’s definitely not perfect quality in terms of welds going through fully. It’s all machine made