CROWN 2400 amplifier restoration / 24 transistor amplifier restore

Поделиться
HTML-код
  • Опубликовано: 27 май 2022
  • Thanks for watching, subscribe & share!
    CROWN 2400 amplifier restoration / 24 transistor amplifier restore
    ► Subscribe to channel: / mrelectricity1111
    Please give me your opinion. Where is not good Let me improve.
    ------------------------------------------
    Thank you for watching the video. please support me. Thanks you very much. love everyone.

Комментарии • 379

  • @via4527
    @via4527 8 месяцев назад +2

    Ну да, после Пакистанского ремонта, я уже ни чему не удивляюсь. Рубрика ещё походит! Главное все замыть и покрасить 😅😅😅😅

  • @lebakaify
    @lebakaify Год назад +23

    Judging from the scars on the left handle of the front panel, the last test machine was not the same machine at all

    • @AtanasPaunoff
      @AtanasPaunoff Год назад +6

      I also noticed that in the end when he closed the cover transistor wasn't soldered at all...

    • @mikem2k38
      @mikem2k38 Год назад +9

      Also the faceplate is a different color and the knobs lost their black inserts. The resistor being soldered where a zener diode goes takes the cake!

    • @jetblakink
      @jetblakink 3 месяца назад

      Well spotted!…

  • @McTroyd
    @McTroyd 2 года назад +36

    Those amps are beasts. That one might still have worked somewhat in its pre-restored shape, as long as all the blown transistors were pulled out. Post-restore, should work well for years yet. 👍️

    • @SangTran-iu7ih
      @SangTran-iu7ih 2 года назад +2

      hhh

    • @puciohenzap891
      @puciohenzap891 Год назад +5

      They have one stupid problem though, they won't function without that motor-fan being operational.

    • @McTroyd
      @McTroyd Год назад +2

      @@puciohenzap891 Didn't know that, but it makes sense. The underlying amp technology wasn't necessarily the most efficient; there'd be a lot of heat to dissipate. I prefer the protection mode of "attenuate the amp based on heat load," but I guess a safety like that is better than nothing. Must be a headache during a live show though.

    • @whynot6795
      @whynot6795 Год назад +3

      Pre restored worked (at least led' are binking). After rusting in chemicals and puliing out transistors its only for trash.

    • @ragaviniroshan1760
      @ragaviniroshan1760 Год назад +2

      😊😊
      88i8i

  • @sareas3294
    @sareas3294 Год назад +30

    28:32 "restorated" amplifier
    29:09 different amplifier

    • @MoparStephen
      @MoparStephen Год назад +4

      Say it ain't so - a restoration video on RUclips that is a fake?!?

    • @tyronenelson9124
      @tyronenelson9124 Год назад +3

      Different label on the front.

    • @DerekHundik
      @DerekHundik Год назад +3

      @@tyronenelson9124 29:09 FAKE FAKE FAKE its different amplifier The old "restorated" one has 3 orange diodes on the top and new one has light green. The scale on the two knobs are longer on new one is shorter and its says level the "restorated" has no level written on it. FAKE FAKE FAKE

    • @DerekHundik
      @DerekHundik Год назад

      ale koles scieme zrobil dwa rozne wzmacniacze tej samej marki. Stary niby "odrestaurowany" ma na górze 3 pomarańczowe diody, a nowy ma jasnozielone. Skala na dwóch pokrętłach jest dłuższa, a nowa jest krótsza a nad pokretlami napisane Level , ten stary tego nie ma. Co za sciema.

    • @gglegreff1858
      @gglegreff1858 Год назад

      Oui, faux, les poignées ne sont pas les mêmes : original...choc a la gauche
      Nouveau....rien, problème ?

  • @aspjake123
    @aspjake123 Год назад +7

    Amazing rebuilds. How in Gods name do you remember all the connections going back! I would be lost and hooking up wrong wires.

    • @wraiths_
      @wraiths_ Год назад +3

      He reviews the videos?

  • @arifinilham3141
    @arifinilham3141 2 года назад +1

    Hai, saya sangat menyukai video restorasi amplifier anda, salam dari Indonesia 🇲🇨

  • @sting1111
    @sting1111 Год назад +4

    That was the holy relic back in my days of sound reinforcement.

    • @MrJef06
      @MrJef06 Год назад

      Brings back memories too. I still own a MA1201 I bought second hand some 25 years ago. Works like a charm (although I don't use it much anymore).

  • @carlosalbertoosilva8012
    @carlosalbertoosilva8012 2 года назад +6

    Muito bom trabalho!Parece novo!!!!!!🤗🤗🤗

  • @user-hi8hm6lx3t
    @user-hi8hm6lx3t Месяц назад

    Great restoration perfect job 😊

  • @user-xo4wy9nl2k
    @user-xo4wy9nl2k 2 года назад +4

    Трудовой импульс-по восстановлению винтажного усилителя конечно-же ---огромный-мастеру -большое уважение и автору видео!

    • @nnnvp
      @nnnvp Год назад

      Какое уважение обманщику и мошеннику?
      Видео для простых олу.хов.
      Сначала он просто отмывает убитый усилитель и машет для вида паяльником
      Потом включает другой усилитель

  • @Djshaw1kinglegend
    @Djshaw1kinglegend 2 года назад +3

    My favorite amplifiers i have a few 3600vz 👍🏾🔊✅ nice

  • @rogelioaleman9588
    @rogelioaleman9588 2 года назад +4

    Exelente trabajo , muy buena presentación, gracias por compartir,

  • @pablocarpentereljunior4295
    @pablocarpentereljunior4295 Год назад +3

    crown los mejores amplificadores del mundo 👍🙏📀💫

  • @josemanuel2724
    @josemanuel2724 2 года назад +8

    És um grande artista fizeste um bom trabalho parabéns pelo seu trabalho obrigado

  • @jorgepoot3033
    @jorgepoot3033 Год назад +3

    Tengo dos que necesitan de un buen mantenimiento y de un gran experto como usted. saludos y felicidades por su gran trabajo, desde Mexico del estado de Yucatan.

    • @josuebalam5119
      @josuebalam5119 5 месяцев назад

      Buenas noches si le dieron su mantenimiento a los de usted acá en Yucatán..?
      También soy de Yucatán y tengo uno que igual necesita su buen mantenimiento pero la verdad no sé en dónde o con quien

  • @Acoustic_Theory
    @Acoustic_Theory Год назад +2

    That amp will be a joy forever.

  • @rudihamda4699
    @rudihamda4699 2 года назад +1

    Mantap....biar sudah ronsok bisa di benarin.
    dan powernya sangat bagus suaranya

  • @washingtonrenato7070
    @washingtonrenato7070 2 года назад +4

    Top demais esse circuito

  • @andymarterior1698
    @andymarterior1698 9 месяцев назад +1

    Wow excellent performance.

  • @user-wk5yh8zg7m
    @user-wk5yh8zg7m 2 года назад +1

    크라운파워 국내에서 알아주는 명기인데 고장난 제품 기술력으로 완전 환골탈태 테스터기로 찍어서 쇼트난 tr 아주 잘 찾아냈습니다..
    출력단 다이오드하고 마일러 콘덴서 저항들 불량 찾는 솜씨가 베테랑급 입니다...
    명기답게 사운드 아주 좋습니다....
    캔디알 방식이라 사운드 좋아서 타운타운 음악 pa용으로 인기있는 명품인데 추억 돋습니다...

  • @carlossantiagobenedithcasi1364
    @carlossantiagobenedithcasi1364 2 года назад +2

    Hola amigo saludos excelente trabajo amigo al 💯 quedó el amplificador saludes y Dios y los bendiga todos allá bay

  • @ezequielsilva2709
    @ezequielsilva2709 2 года назад +9

    Excelente trabalho 👏👍

  • @tadeucampos484
    @tadeucampos484 Год назад +2

    Very good job, my friend! You really know what you do. Congratulations from Rio de Janeiro - Brazil! 👋👋👋👋

  • @tei0930
    @tei0930 2 года назад +1

    Kereeen juga ya tuh amplifier
    Power badak pada masanya mungkin yak

  • @Mr.ky89
    @Mr.ky89 4 месяца назад

    He is highly skilled in restoring electronics

  • @user-cc4xz3ib7w
    @user-cc4xz3ib7w 2 года назад +6

    Ремонтировал один аппарат, а в финале подключил и демонстрирует другой... Оформление передних панелей отличается и др.элементы. Липа какая-то...

    • @user-ek9vs4xi7x
      @user-ek9vs4xi7x Год назад +1

      Я тоже заметил,что что-то не то.Последнюю плату вообще просто положил,не закрепив.Понятно,что лажа.

  • @manueltirado4130
    @manueltirado4130 2 года назад +1

    Muy bien hecho, volvió a la vida

  • @miguel--rush
    @miguel--rush 2 года назад +1

    Excelente trabajo...saludos desde Buenso Aires..! Gracias!

  • @micrometer1484
    @micrometer1484 Год назад +5

    That's a quick way to solder through hole components! I suppose whatever works, instead of the longer process of soldering through the hole to the trace side. I also noticed that the working amp doesn't appear to match with the restored one.

    • @nitroboy2
      @nitroboy2 5 месяцев назад +1

      i see , the left handle is magicaly fixed

  • @samwatcharin3246
    @samwatcharin3246 2 года назад +2

    ทำได้เหมือนจริงเลย กล้าสุดๆ

  • @hyderlanycostadossantos6607
    @hyderlanycostadossantos6607 Год назад +2

    Aparelho excelente e confiável

  • @B-Doy
    @B-Doy 2 года назад +1

    ติดตามทุกคลิปเลยครับ เก่งมากๆเลย ผมอยากทำให้ได้เหมือนคุณจังเป็นกำลังใจให้นะครับ จะติดตามตลอด สร้างคลิปดีดีอย่างนี้ออกมาเรื่อย ๆนะครับ

  • @anatolynord7781
    @anatolynord7781 2 года назад +2

    Супер лайк Вам ребята.

    • @nnnvp
      @nnnvp Год назад +5

      За что? За то что снял фейк о том как он якобы делает усилитель?

  • @dragocas1
    @dragocas1 2 года назад +2

    Хороший видео материал.

  • @riskasoundsystemchanel5973
    @riskasoundsystemchanel5973 Год назад +1

    Sip sip👉👍👍👍👍garapan nya

  • @skorodumski8882
    @skorodumski8882 4 месяца назад

    Автор, я тебе лайк поставил за то, что не отказываешься от работы, но есть нюансы в твоей работе:
    Во-первых: ты не обновил оловом некоторые закисленные контакты
    Во-вторых: после покраски я увидел, как краска обуглилась в некоторых местах корпуса.
    Если делаешь работу, то постарайся, пожалуйста, сделать это максимально красиво и качественно.
    С уважением, от подписчика, который любит твои работы.

  • @heikobarisch3235
    @heikobarisch3235 Год назад

    Crown PA Amplifer Made in Japan sehr schönes Video Respekt kann man nur sagen Super gemacht und lehrreich. LG.🤗🤗🤗🤗🤗👍👍👍👍👍👍

  • @kisadimun9034
    @kisadimun9034 Год назад +1

    Pinter temen Rika pak....👍👍

  • @FWS99channel
    @FWS99channel 2 года назад +2

    Good amplifier.

  • @catalin-constantin4197
    @catalin-constantin4197 2 года назад +11

    You did a awesome job restoring that amplifier 👍

  • @tomjohnston9794
    @tomjohnston9794 Год назад +5

    I was a Crown authorized factory warranty tech for years in music stores in Austin..Repaired many of those and the older ones and the micro techs too..A curve tracer makes troubleshooting a breeze instead of a DVM though..The old DC#))'s did just that..they DC straight into your cab when an output shorts...Peavey CS800 crowbar protect circuit was the answer, we built them on small cards to for in the banana jacks on those..fun stuff.

    • @THEtechknight
      @THEtechknight 6 месяцев назад +1

      That crowbar circuit on the CS800 took me for a ride one time when I was just getting into amplifier repair as a teen. Theres a couple concerns in this particular video though. He doesnt show the replacement transistors, only soldering in the old ones and not showing the replacements. And then at the end of the video it looks like a completely different amp with the sticker looking new..

    • @connerlabs
      @connerlabs 6 месяцев назад +1

      @@THEtechknight Yeah I was watching to see what he used for the replacements, the Crown output transistor is just a rebranded MJ21194 or MJ15024 or something IIRC?

    • @josuebalam5119
      @josuebalam5119 5 месяцев назад

      Tengo un crown2400 macrotech tiene el problema de que la encenderlo un canal no enciende el LED rojo y me saca el audio ruidoso ronco y bajito no sabrá cuál sea el problema..?

  • @RestorationAustralia
    @RestorationAustralia 2 года назад +2

    Well done. 👍

  • @K-Effect
    @K-Effect 2 года назад +2

    Crown for the win

  • @davidclark3603
    @davidclark3603 2 года назад +1

    Brilliant job!

  • @rickybelaongtv.3994
    @rickybelaongtv.3994 2 года назад +2

    good 👍 job

  • @eliseoflores9192
    @eliseoflores9192 2 месяца назад

    It's amazing how you took it apart and put it back together, I did it but I only took half of it apart.

  • @joaoclaro311
    @joaoclaro311 2 года назад +5

    Excelente restauração ! Parabéns pelo bom trabalho ! Adorei 🥰

    • @tilingaseme773
      @tilingaseme773 Год назад +1

      esa reparación no fue buena ubo muchos detalles que no captaste por lo tanto., el trabajo no sirve

    • @josuebalam5119
      @josuebalam5119 5 месяцев назад +1

      ​@@tilingaseme773tengo un 2400 un Canal como que no enciende y me saca el audio ruidoso y bajito

    • @tilingaseme773
      @tilingaseme773 5 месяцев назад

      limpia y observa filtros y diodos y despues resolda todos los puntos de la fuente de poder y sino arranca tu aparato de sonido......Me capo amigo mio@@josuebalam5119

  • @jeffersomdesouzasilvasilva6771
    @jeffersomdesouzasilvasilva6771 2 года назад +1

    Amigo excelente 👏👏👏👍👍

  • @milagrosrivas8449
    @milagrosrivas8449 2 года назад +1

    buen trabajo hermano super desde venezuela

  • @DjDelaFlav
    @DjDelaFlav 7 месяцев назад

    Those Crown👑 Macro Amps Are Like an Army Tank..They Never!! Ddie💪 I've Had four in my previous past and there is nothing else more obsolete Then Crown👑

  • @DouglasSilva-hy7jd
    @DouglasSilva-hy7jd 2 года назад +2

    Good job

  • @electronicshelpcare
    @electronicshelpcare Год назад +1

    I like crown amplifier

  • @manuelcastellanos8286
    @manuelcastellanos8286 2 года назад +5

    Excelente amplificador tengo uno en uso desde hace más de 25 años y como que nada. Saludos desde Guatemala 🇬🇹

  • @tsimeone
    @tsimeone Год назад +10

    Looks like different amp on the finish, no damage..

    • @nnnvp
      @nnnvp Год назад +4

      Its fraud

    • @tsimeone
      @tsimeone Год назад

      @@nnnvpso many of these so called restorations are getting that way these days. A few good ones out there. But lots of fraud too

  • @Tom-zq7lu
    @Tom-zq7lu 2 года назад +2

    Fantastic and beatifull restauration ok 👍💯💢💯👍

  • @kidulkono
    @kidulkono 5 месяцев назад

    cool, what a superb skills

  • @sonidobaiker2978
    @sonidobaiker2978 2 года назад +1

    Exelente video

  • @re-fix9678
    @re-fix9678 2 года назад +1

    good restore😘😘

  • @user-fp9mq9vx5o
    @user-fp9mq9vx5o 2 года назад +2

    лайк за труды

    • @nnnvp
      @nnnvp Год назад +1

      До чего же все слепые
      Нет там никаких трудов
      Видимость работы
      А в конце другой усилитель 😅

  • @jt.rewinding6533
    @jt.rewinding6533 Год назад

    Always watching sir

  • @carlospaz1251
    @carlospaz1251 Год назад

    Excellent Work 🤝🏾

  • @tiktokers2584
    @tiktokers2584 Год назад

    High classs👍

  • @thomaslechner1622
    @thomaslechner1622 Год назад +2

    So you installed the same 25 year old dry and basically dead electrolytic caps again?

  • @jorgepoot3033
    @jorgepoot3033 Год назад +1

    Magnifico trabajo como me gustaria tener un gran maestro asi en mi pueblo!!!!! Donde se hubican???

  • @gafarys2582
    @gafarys2582 2 года назад +1

    Nice.....👍👍👍
    🇮🇩🇮🇩

  • @Asubuhi
    @Asubuhi Год назад

    Awesome! Good Job❤❤

  • @dennisrowe4145
    @dennisrowe4145 2 года назад +2

    This guy works really really fast....

    • @vpowerelectrix998
      @vpowerelectrix998 2 года назад

      It's sped up,😀

    • @puciohenzap891
      @puciohenzap891 Год назад +2

      He is so fast that at the end of the video he replaced the whole amplifier! Look at the details, it's a different amp.

  • @bobmartin6816
    @bobmartin6816 Год назад

    Looks great ..... what solvent did you use for cleaning the circuit boards......

  • @alexko5504
    @alexko5504 2 года назад +3

    Красавчик!!!!!

  • @catcheat6945
    @catcheat6945 Год назад +1

    Excellent job, Master.

    • @nnnvp
      @nnnvp Год назад

      Excellent fake 😉
      29:09 not this amp

  • @edmundsmerud4797
    @edmundsmerud4797 Год назад +2

    great amps

  • @user-uw4tp4lj3l
    @user-uw4tp4lj3l Год назад

    Good~~~~!

  • @JaviersDIY
    @JaviersDIY 2 года назад +1

    Very interesting

  • @elreyboricuacamacho1886
    @elreyboricuacamacho1886 2 года назад +1

    Excelente excelente 100

  • @94Fayin
    @94Fayin 2 года назад +2

    Excelente restauración, en hora buena.
    Que tipo y serie de transistores usa este amplificador..?
    Saludos desde la Ciudad de México.

  • @MCKINGINDIA
    @MCKINGINDIA Год назад +1

    Your new 🆕 subscriber 🙏💖

  • @cesars4445
    @cesars4445 Год назад +3

    Nice restoration job Mr.Electricity congratulations... is a hell of detailed work. Not sure if the restored amp ever worked, since the tested one seems to be a different one.

  • @crazyxyzindia2022
    @crazyxyzindia2022 2 года назад +1

    Your new subscriber 🙏

  • @paulessdot2
    @paulessdot2 2 года назад +1

    I long for one of these amps, nice job 👌

    • @donaldcatlett5850
      @donaldcatlett5850 Год назад +1

      I did too , just got one bout a year ago 😊🎉👏🎶🎵I'm blessed

    • @paulessdot2
      @paulessdot2 Год назад

      @@donaldcatlett5850
      Nice 👌

  • @Afterburner
    @Afterburner Год назад +4

    I was curious if you used heat sink compound with those power transistors when you replaced them? Great video!

  • @sajutm8959
    @sajutm8959 2 года назад +1

    Nice 👍🏻

  • @jasaserviselektronik
    @jasaserviselektronik 2 года назад +1

    Very good

    • @nnnvp
      @nnnvp Год назад +1

      Very good fake 😉

  • @marcosrodrigues9415
    @marcosrodrigues9415 Год назад +3

    Chique show 👍👍!!!!

  • @vimalkumar3815
    @vimalkumar3815 2 года назад +1

    Old beauty 🤩...

  • @chongshenchang9367
    @chongshenchang9367 2 года назад +25

    What the hell... Left channel power transistors were not replaced, and still he is playing both channels. It's a fake restoration.

    • @manashmondal1744
      @manashmondal1744 2 года назад +8

      I think another channel Transistor are working 🤣🤣

    • @puciohenzap891
      @puciohenzap891 Год назад +7

      Of course it's fake, the amp at the and is a different one! Look at the details, these people know no shame.

    • @uncanalmasdemusicasincopyr1294
      @uncanalmasdemusicasincopyr1294 Год назад +2

      Hay algunas personas que estan en contra de la Restructuración en equipos de gama media, por alguna razon se quejan de ello no admitiendo que se hizo lo correcto?

    • @Adisehatkembali
      @Adisehatkembali Год назад +2

      This is cleaning the amplifier

    • @d.jkellzworldentertainment9561
      @d.jkellzworldentertainment9561 Год назад +2

      Please try to make your own video let's see if you will replace good transistor

  • @marcosbarreto3969
    @marcosbarreto3969 10 месяцев назад +1

    essa marca de potência e um das melhores

  • @paser_ikan
    @paser_ikan 2 года назад +1

    Wow amazing

    • @nnnvp
      @nnnvp Год назад +1

      Amazing fake

  • @hoanvu7538
    @hoanvu7538 6 месяцев назад

    mình không biết bạn ở đâu?nhưng hâm mộ trình độ của bạn

  • @heromail2903
    @heromail2903 Год назад

    You are extraordinary....

  • @user-wq9qh5jm1c
    @user-wq9qh5jm1c Год назад

    お上手ですね!

  • @DeadlyVenomKing
    @DeadlyVenomKing 3 месяца назад

    You be working for one of those crowns authorized repair shops.

  • @user-so2ep5um6p
    @user-so2ep5um6p Год назад

    ...super man...

  • @AudioNote
    @AudioNote 2 года назад +2

    May I ask what brand of soldering iron you are using?

  • @wilsonaugusto2463
    @wilsonaugusto2463 4 месяца назад

    É uma das melhores marcas de áudio profissional

  • @fauzanaf2203
    @fauzanaf2203 2 года назад +1

    Mantap....

  • @tassottia
    @tassottia 2 года назад +1

    bravo!

  • @DjDelaFlav
    @DjDelaFlav Год назад

    The Kings!! Of Amplifiers no company Does it Better✌️

  • @marditeknisi99
    @marditeknisi99 Год назад

    Indonesia hdir

  • @user-ek9vs4xi7x
    @user-ek9vs4xi7x Год назад +1

    Просто разобрал и собрал назад,без всяких настроек?Не верю.Последнюю плату вообще просто так положил,не закрепив в штатные клипсы.Кстати вижу,что не один я заметил,что в конце показан совсем другой усилитель.

  • @harripersaddaniel3321
    @harripersaddaniel3321 2 года назад +3

    Great work on these amp

    • @nnnvp
      @nnnvp Год назад

      29:09
      Not this amp 😂