HobbyKing's Tips Bench Tuesday - Checking Motors & ESCs with a Servo Tester
HTML-код
- Опубликовано: 7 ноя 2022
- For this edition of Tips Bench Tuesday, Stuart goes over tips on how to quickly check electric motors and/or ESCs using a simple servo tester.
The Turnigy Servo Tester: bit.ly/3WBR5Xb
Don't forget to like, share, subscribe, and hit the notification bell for regular HobbyKing videos
Enjoy, stay safe, and let's keep growing the community.
• Sign-up for Email Updates: bit.ly/2YahBd5
• Facebook - / hobbyking
• Twitter - / hobbykinglive
• Instagram - / hobbyking
#turnigy #servotester #hobbyking #rcfun 
Развлечения
Great video. Thanks for posting! It helped me figure out how to configure my CellMeter 8 to test my brushless drone motor even though that was not tester you were using.
In 40 years of flying RC (20 or so using the brushless technology and testers we use today) and thousands of RC videos, this is the most useful, I honestly had no idea my tester could handle such loads for motor testing. Thank you Stuart
The tester is only supplying the control signal, the ESC handles the power to the motor.
Excellent, Stuart ! This was a VERY USEFUL & CLEAR presentation of an alternate application of a servo tester which l haven't readily seen elsewhere.
Glad it was helpful!
@@HobbyKingOfficial Most respectfully a big YES.
Couldn’t imagine not having a servo tester in my toolbox, works great for a great deal of applications, including centering servos for proper linkage set up, to motor or EDF checks and run ups, thanks for another great tip Stuart 👊🏼👊🏼
Right on
Great tips Stuart. I've never used a servo tester for that...great use for it!
Thanks 👍
An excellent tip video. I've always thought this could be done but have yet to have the need to do it. This method is so much easier than doing it in a bound model and swapping ESC and motor till I found which part was faulty. HobbyKing was very wise to get you back.
Glad it was helpful!
Thank you finally I've been looking for just that for a trolling motor for my kayak using a brushed 880 esc from hobbywing. Best video I've found.
Great tip Stuart
Glad to help
Thank you very much...
thanks Stuart ! Great tip
Excellent tip👍
Thanks 👍
Handy tool, I like mine!
Thanks for the bonus tip, the lights are blinding. think I will use your tip as I had just been putting my finger over it till now 😀
Glad to help!
Better way: open up the box, put a 100 ohm resistor in series with the LED.
(Or try different values until you get it the brightness you want.)
Also, the metallised film bags that ICs are packed in make very good darkening filters for overbright LEDs. Maybe two layers.
Great video! I did not know about the ESC and motor testing capability. Is there a practical limit (say1500 watts) for controlling a motor under load with this tester, assuming right size of ESC and battery? Also, when testing servos I have been powering this tester with 4 alkaine AA cells- is that OK?
Great video how would you get forward and reverse on this.
is there anyway to turn the pot into trigger type? I want to use it to run a bldc motor but don't want to have to turn the pot, turn it into a button also help? please help
Awesome.. would the motor run full if the knob is turn all the way when when the battery is plugged in and armed
How many AA cells should I use to provide power to test motor and/or servos ? 2,3,4 ??
I just received mine and coincidence how a video was just released for it. LED's are blinding bright could use those on our planes.
Landed in bush, smelled like speed controller burned out. Tested replacement speed controller and it works, motor runs great. Took plug and put it into receiver. None of the servos responded. What could be wrong?
I suggest join a Radio Control Model forum, you may need to post a diagram to explain the problem.
does it work the same for car esc and motors?
Yes sir
habe enliche regler mit 3 schwarze kabel und ich weis nicht welche von dem wer wer ist , also plus minus signal
Probly can't even get a servo tester from hobby king.....they have nothing in stock.... literally everything I look up is out of stock with no word on when or if it will be in stock....I bought a savage bobber 3 months ago and it still doesn't have a motor because none of their parts are in stock.....c'mon hobby king what's up
All but US available right now and I just got one from Global order and I'm in the US about 2 weeks.
As of 28 December 2022 the non-aluminum cased servo tester is available from HK USA. The aluminum cased one is available from HK Global ( Hong Kong ).