DIY Custom PedalBox, part 9 on the Smart-Hayabusa project
HTML-код
- Опубликовано: 26 авг 2024
- Yes, I'm back!! 🙌 After 2 months without video, here is part 9 on the Smart Hayabusa Project
⬇⬇⬇Parts⬇⬇⬇
Wilwood Master Cylinder:
amzn.to/2N80fuY
Pedal Box kit:
ebay.us/VNpnN8
ebay.us/bzJ3Nf
ebay.us/gD9HcS
Don’t worry about making long videos.
Just found your channel, and watching the videos!
Merci!
The wire brush trick to clean your magnet squares is really smart I used compressed air but next time I go to clean mine I’m trying that.
Thanks man, glad I could help! 😁
Finally waited for your new work, great
Thank you man!
Hi I installed I wilwood pedal Box to my smartbosa but what I saw today is something stronger then wilwood pedal Box. You are realy Professional💪.
Hey thanks Yaser, Send me some more pictures of your project by email! I want to see your progress!
Complimenti, bravo, hai poche visualizzazioni e il tuo lavoro ne meriterebbe sicuramente molte di più!
Grazie! Anch'io la penso così, ma su RUclips devi essere paziente ..... molto patinet! Grazie per il commento!
Two week ish! See you there ish!
Maybe...it will be less... 😲
Great job, Vinnie!
Thanks!
Binge watched it!
🍕🍺🍗🍿 Thanks!
Hey vinnie I am glad to see you back bro.
I'm back man, and I've got a lot of video to edit and release!, stay tune!
Super travail mon ami! J’adore suivre ton “build”....keep it up!!!
Merci Sylvain! 😁👍
I want to try and fit a 22r in mine. 28 inch tires and a tow bar. Smart car pulling a travel trailer. Also... what is that music in the beginning? Incredible.
Thanks man, the song is Benji- Dyalla and good lock with your project, make sure to send me some pictures during fabrication! 👍👍👍
Good job
Thanks!
I love this vid!
Thanks
Amazing videos hope your channel blows up!!
I hope so too! thanks Thomas
salut, je voit tes vidéos un peu tard mais bon ahaha, je fais le même projets depuis quelque années mais avec un Zx12R, beaaaauuucoup d'heures de plaisirs!! :) Je fabrique toute mes propres pièces aussi mais étant beaucoup moins équipé j'envoie tout à la découpe laser et au pliage et le gros machinage aussi! En touka beau projet ! :) j'en suis qu'a la partie 9 mais je compte bien les faires toutes!
Hey merci mon cher!! Lâche pas! C'est vraiment un long projet à faire!
@@VinyB57 ho oui, il y a vraiment beaucoup de choses à prendre en compte pour que ça fonctionne bien et que ça reste fiable! Moi il va etre pour la rue donc le plus discret que je suis capable! Je suis rendue à l'étape de mes entrées d'airs, elle vont être moulé en carbone dans les deux petites fenêtres arrière chaque coté!
Great stuff as always , you may want to check your spelling in the title hayabusa so you may get more views
Hey thanks man!! 👍👍👍 Hayasusa 🤦♂️
Two WEEKS! dam !!!!!
U can't bring your energy in too my house then tell me two weeks!!!😪😊😛
HEY Linday...for once I did 2 vids in a row with the raking garbage bin! Hope you enjoyed it 😁
@@VinyB57
U did my friend !
Hats off to u and keep them coming
I know one day we will meet i hope?
Maybe on a collaboration I just started taking footage and I'm going to try and put my first video out I'll let you know when I do and again thanks for those memories!👍👍👍 please pin this comment my channel wont be on this account have a great day
@@VinyB57
Lmao i just liked my own comment who does this?😛
Anyone else catch them self closing their eyes when the arc lite up on the welder?? Oh, Just me...LOL
Good one... 😅💥🎇✨
we miss you bro!! don't do it again :D
Thanks man! I'll try....next vid will be really soon....spoiler..it's not on the smart Busa.. 😲😲
@@VinyB57 i am looking forward 😮👍
My guy. On point bra👌👌
Thanks! 😁
Great video man 💯👍
Appreciate it Ryan! (I know, I'm 2 weeks late 😅)
very nice cant wait to see the finished car see you in 2 weeks cough cough
Again with the cough cough!... 😉 It may be less then 2 weeks... 😲
Hello,
Great job. I was looking around for a pedal box parts drawings. Is there any chance to buy these in DXF?
Need to build one myself.
write to my email, I'll send you all I have on this pedal box design57@outlook.com
Can you share blueprint
Why not just use the busa clutch lever mounted to your shifter? Looks great just seems like alot of work
It is a lot of work. I just wanna have the same feeling as a regular car, using a clucht pedal. And I'm always up for a challenge!
Great stuff, Vinnie!
Watchin you from Ukraine ;)
Im new here but the subscribe button now is grey, good luck man
Oh yes!! Welcome Vladyslav Mukha! Me like the gray button!
salut vinnie comment a tu dimensionner les maitre cylindres ?
J'ai pris un kit std sur ebay. Et j'ai racheté un Wilwwod: Maître-cylindre 260-15091. Pour la clutch, je limite le déplacement parce que j'envois bcp trop d'huile et j'ai craké le support du slave cylinder. Ensuite il faut jouer avec les distance pied-pivot-cylindre pour que cela fasse du sens. J'te donne mes dimensions, j'ai fabriqué: 8.5'' du pied au pivot et 1.25'' du pivot au cylindre!
Oh ok it just wasn't in the playlist. :)
Best way to clean your square is with compressed air.
My God man I thought I was going to have to break into Canada and come to your funeral
Don't come in Cananda, we have Covid here....wait...it's every where! 🤦♂️
@@VinyB57
It's closing in on every one of us lol
“Brake bias” en anglais
Ho thanks man! 👍 Didn't know that!
why tf did u make it so heavy ?????????
I like it that way...🤷♂️
Hi I sent you email for cad files thank you!
Mrs Richards: " I paid for a room with a view!"
Basil: (pointing to the lovely view) "That is Torquay, Madam."
Mrs Richards: "It's not good enough!"
Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..."
Mrs Richards: "Don't be silly! I expect to be able to see the sea!"
Basil: "You can see the sea, it's over there between the land and the sky."
Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction."
Basil: "Why?! Because Krakatoa's not erupting at the moment?
Found your channel when seeing your trailer video. I then subscribed and went back to see the Smart Hayabusa build. You do great work and was looking forward to seeing you work. I've come this far and I must say, while I love what you do, your videos are mainly about you talking and being a comedian instead of the build. Its unfortunate that you spend so much time doing that instead of showing your build. If I wanted to watch comedy I would watch the news network. Hope you change your format or I will lose the remaining little interest. As I said, I love your work, if this channel is about comedy, I'm gone.
I cannot change who I am and surely cannot please to every body, that is not my goal!
@@VinyB57 I'm not suggesting you should change who you are, you are quite funny, I'm just suggesting you should show more of what you do, 80% of the video being about you talking and showing funny skids is not a build channel. Just saying, yes, its your call, I'm just letting you know what people that watch builds like to see. Good luck.