Thank you Alfredo! Glad to see you back on RUclips! I have learned so much from your videos, and always look for new ones. Please keep 'em coming, the industry needs you! Great work sir!
Did one of those vehicles took me awhile to figure that out. Been watching you for awhile. Can you show how you do rock chips please. At our shop i'm the one show how to do rock chips repairs. Will like to see your tips. Your videos real help me with a lot of the newer cars. Thank you!!
I’ve done one other day, you DO NOT have to take it all apart unless to vacuum glass if needed. Yes there are ways to do these with only taking off doorpanel and loosing bolts and nuts on certain areas.
How about a friend, a very good video, I am dedicated to installing crystals in Mexico to be exact in Acapulco myself and installed that journey glass and did not remove the elevator cover I put it through ariva is a bit
Why on gods green earth are they moving to in design, they just need to go back to bolts and the regulator inside the door design. It was simple this is crazy
At least the new ram doors have the notch pre cut to drop it though the top. Our shop got a mopar parts person to look up their how to vid on and the triangle aluminum was taken off and a little notch cut into it behind the exterior chrome piece to put the glass in. This was with a laminated part but a 15 or newer grand cherokee This is quite a bit safer though
Thank you Mr Alfredo very helpful I don't know how the ugly Dodge and ford build such a difficult for the technicians to work on it honestly nothing Beautiful like Toyota or Subaru 🙏 Super easy to do 💖💕
You don’t have to remove the lock from the door, all you have to do is unhook the metal rod that locks the door off the latch and just take the latch on its own without disassembling so much
are you serious you open the whole door panel and regulator toke it out for just to put door glass inside the door , back door glass we do it in 15 mint without take anythink out ,just door panel i will upload short video for you to show you how easy is when i have dodge journey in my shop .
Thank you Alfredo! Glad to see you back on RUclips! I have learned so much from your videos, and always look for new ones. Please keep 'em coming, the industry needs you! Great work sir!
Thank you 😊
Very helpful thanks man
Been doing autoglass since 1977, glad I am about to retire. Thanks for your input.
????
I’m learning more and more thanks to your videos, keep up the good work
I’m happy to hear that! Thank you 🙏
Thanks for the videos 👏🏻👏🏻❤️
Please show the whole process from beginning to end. Thank you 🙏
Did one of those vehicles took me awhile to figure that out. Been watching you for awhile. Can you show how you do rock chips please. At our shop i'm the one show how to do rock chips repairs. Will like to see your tips. Your videos real help me with a lot of the newer cars. Thank you!!
Thanks for the video buddy. I ended up disconnecting the cable from the outside door handle I found that to be a little bit easier.
Exelente video ,saludos de México
Gracias igualmente, saludos!
thank you very much! worked great on 2018 grand cherokee
Thanks for a great video
I’ve done one other day, you DO NOT have to take it all apart unless to vacuum glass if needed. Yes there are ways to do these with only taking off doorpanel and loosing bolts and nuts on certain areas.
Can you explain further man. My back door window on my Dodge Avenger shattered. I have the door panel off already and not sure what to do now
That's me 2019 jeep Cherokee glass shattered can't figure out how to get glass back in
Thanks for the videos. Did you know that you can use clip/scuttle remover tool to unclip the door panel instead of trying to pull it off.
How about a friend, a very good video, I am dedicated to installing crystals in Mexico to be exact in Acapulco myself and installed that journey glass and did not remove the elevator cover I put it through ariva is a bit
Complicated but if the glass comes in, you can tell me why you do it that way, thanks for the very good video and greetings.
Why on gods green earth are they moving to in design, they just need to go back to bolts and the regulator inside the door design. It was simple this is crazy
At least the new ram doors have the notch pre cut to drop it though the top. Our shop got a mopar parts person to look up their how to vid on and the triangle aluminum was taken off and a little notch cut into it behind the exterior chrome piece to put the glass in. This was with a laminated part but a 15 or newer grand cherokee
This is quite a bit safer though
Thank you Mr Alfredo very helpful I don't know how the ugly Dodge and ford build such a difficult for the technicians to work on it honestly nothing Beautiful like Toyota or Subaru 🙏 Super easy to do 💖💕
I Agree! I don’t understand why they make it so difficult 😅, Japanese engineers think of us and make it easier for us 😃
You don’t have to remove the lock from the door, all you have to do is unhook the metal rod that locks the door off the latch and just take the latch on its own without disassembling so much
Wait. Isn’t it possible to undo the latch from the door handle, and then pull the latch and the plastic mid barrier as one whole unit?
Yes it’s possible but way more time consuming, this is just one way. It works that’s why I thought I shared my technique.
Dodge nitro tho?
Do you have classes?
are you serious you open the whole door panel and regulator toke it out for just to put door glass inside the door , back door glass we do it in 15 mint without take anythink out ,just door panel i will upload short video for you to show you how easy is when i have dodge journey in my shop .
So did you ever upload your own video? It would be super helpful to know how to do it in 15 minutes
Major overkill it’s not necessary to remove all those parts only door panel
How would you do it with only the door panel removed Im trying to replace the rear door glass in my 2011 Dodge Avenger
These are the devil
😂