@@atlex2 how will they do it foe you for free? And you shouldnt do it outside. You do it inside at a table. Also, buying tge supplies ia the cost of 2 waxings
Simply rub wax onto the ski, go over with the iron, then scrape. No need to melt on excessive amounts to then scrape off. I learned this at a tuning class.
A regular iron is fine as long as you a) set it to "wool" for proper temp; b) don't use it for anything else, especially clothes! (ask me how I know ;)
Hi, Following several RUclips "tutorials" I've started waxing my families skis. It's quite fun doing it by yourself. Still one aspect is unclear: after a couple of waxing days, tiny, fine particles of wax are trapped on the brush / bristles. How do you clean your brushes? Thanks, Alex
If you are just using your skis to do some general skiing all you need is a base prep wax so when you buy it it will say BP for vase prep and then a number depending on the temp of the snow but if your ski racing then you will need about 4 other diffrent kinds of wax that are very expensive but I can’t explain all that right now
Thanks for this concise video. However, I don't catch the brush process. Would it be better off to finish with the nylon brush instead of horse hair? Also, the bronze brush does it affect the structure? When do you use it?
wire brush first, more abrasive and stiffer to get the excess wax off. nylon next, because it’s a little less stiff, and can kinda smooth put the wax better. horse hair last, because it is the softest, and really polishes the wax. also the wire brush does not affect the base of the skin at all. the wax is thick enough to protect it, because it doesn’t remove much wax at all, just leaves a little bit of wax dust.
Is there a different technique used to wax skis prior to off-season storage? Do you skip the scraping step, then scrape and brush prior to next time you go skiing?
Yes, when I wax my skis I buy a premium skiing wax and it is semi expensive. When I'm done scraping, I keep the used wax in a container and re-mold it.
Should I still scrap the wax off for storage at the end of the season? Isn't it better to let more wax stay on the ski during summer? Any other tip for ski storage is appreciated, a newbie is here!
I never bother to scrape it at all. The action of skiing itself scrapes it down after a few runs unless you are only skiing powder. Is there any real benefit to scraping it? I mean, maybe if you are racing -but for an ordinary “advanced” level skier?
The first time I waxed my whole family's skiis, I skipped all the scraping and brushing. Everyone was mad on me that the skis barely slide. It was a warm weather with wet snow though.
People, please make sure you understand that fluorinated waxes contain PFAS. They are now finding major PFAS contamination in groundwater near ski resorts. Certain produces are now making non-fluorinated waxes.
The wax fills microscopic pores in the ski base. It's not a thick layer of wax that helps, it's filling in the tiny holes in the ski base. It also will repel water from sticking to the ski, and a tiny layer is all that's needed to keep the bottom water free.
There are tiny little "pores" in the base of the ski that the wax fills up, giving the base a smoother glide. You want to scrape the wax off because it will create a smoother base. Don't worry, scraping the skis won't take the wax out of the tiny pores. Of you leave the wax on it will only make your skis stick to the snow and slow you down.
Thank you for this helpful video. The unspoken thing I should have noticed about this video is that guy is waxing the skiis OUTSIDE! Don’t try this on your kitchen counter if you don’t want melted wax everywhere! 😆.
You need not let the ski/wax go "cold" after ironing............ Allow to "cool" to a elevated room temp, arbitrarily 100 F/38 C and rather than scrape hard........, skim at a lower angle (20 degrees) preferably with a steel "scraper" - albeit with a softened edge. Simply skim the slightly soft wax from the surface and when adequately removed THEN let the ski get "cold"/set up for last minute touch up - skimming before full scrubbing, followed by brushing with scrubbing and brushing brushes, respectively.
You can leave on the light coating of universal wax that all skis come with for your first few lessons. It will keep speeds down yet still keep the base healthy. Experienced skier: Immediately rewax your new skis, putting on a thick coat of wax chosen for your anticipated snow conditions. You can read more here: bit.ly/3VARhVT
After watching this I've decided I'm not gonna wax my skis myself
It is the easiest thing ever...
Not much of a handyman hey? Lol
This is too hard for you?
@@ThatSB You have to buy a bunch of stuff and have space outside to work whereas REI will do it for me for free 🤷
@@atlex2 how will they do it foe you for free? And you shouldnt do it outside. You do it inside at a table. Also, buying tge supplies ia the cost of 2 waxings
Simply rub wax onto the ski, go over with the iron, then scrape. No need to melt on excessive amounts to then scrape off. I learned this at a tuning class.
A regular iron is fine as long as you a) set it to "wool" for proper temp; b) don't use it for anything else, especially clothes! (ask me how I know ;)
a travel iron is really handy. Small shape and only dedicated to ski waxxing
Easily the best ski was tutorial on you-tube. Simple and clear. Onya
Great video very concise with great expert advise, just waxed my skis and it feels great!
Hi,
Following several RUclips "tutorials" I've started waxing my families skis. It's quite fun doing it by yourself.
Still one aspect is unclear: after a couple of waxing days, tiny, fine particles of wax are trapped on the brush / bristles.
How do you clean your brushes?
Thanks,
Alex
Try hot water and dish soap
There is a brush for that. 😉
I use my copper brush to clean the other brushes.
Use a copper brush to get off the little wax shavings from the wax brush.
@@Sqwivig and then, the wax from the brass brush?
What kind of wax would you prefer, thank you for the great video!
Tutorials With Mmbubba ttkj p 00q39eioeoeoeeee3 the 3iq3k l vxxxxv
Amin Kh what the hecc?
@@iremainunknown3399 this guy knows
If you are just using your skis to do some general skiing all you need is a base prep wax so when you buy it it will say BP for vase prep and then a number depending on the temp of the snow but if your ski racing then you will need about 4 other diffrent kinds of wax that are very expensive but I can’t explain all that right now
The best ski wax video on the tube. Thank you for sharing in an efficient instructive way.
Sttm35 j
XT Cy no no no chchuchino iii
Nice and to the point video
Thanks for this concise video. However, I don't catch the brush process. Would it be better off to finish with the nylon brush instead of horse hair? Also, the bronze brush does it affect the structure? When do you use it?
wire brush first, more abrasive and stiffer to get the excess wax off. nylon next, because it’s a little less stiff, and can kinda smooth put the wax better. horse hair last, because it is the softest, and really polishes the wax. also the wire brush does not affect the base of the skin at all. the wax is thick enough to protect it, because it doesn’t remove much wax at all, just leaves a little bit of wax dust.
Is there a different technique used to wax skis prior to off-season storage? Do you skip the scraping step, then scrape and brush prior to next time you go skiing?
I think it's called 'winterising' and basically you just ensure the ski is dry, wax it then leave it.. scrape and brush when you're ready to use.
Hi, can we reuse the wax that has been scrapped off?
Thanks
Yes, when I wax my skis I buy a premium skiing wax and it is semi expensive. When I'm done scraping, I keep the used wax in a container and re-mold it.
It’s a bummer that I just bought a $150 ski tune kit from REI and it doesn’t have the stuff that they say I need.
Why do you scrape all the wax off? Doesn't that defeat the purpose of waxing them?
*this dude showing his multiple tools and special was* ... *me watching this while waxing them with a candle*😮
Yeah, and plus an old no steam hot iron. It's not much high-tech but gets the work done.
yeah right?
I’ll ride my Onewheel to REI with my skiis for them to wax it for free
...and have to wait 5 days minimum before you can come pick them up because they're always busy.
Should I still scrap the wax off for storage at the end of the season? Isn't it better to let more wax stay on the ski during summer?
Any other tip for ski storage is appreciated, a newbie is here!
leave it on for the summer, it will protect the skiis from drying during off-season 👍
I never bother to scrape it at all. The action of skiing itself scrapes it down after a few runs unless you are only skiing powder. Is there any real benefit to scraping it? I mean, maybe if you are racing -but for an ordinary “advanced” level skier?
that does work especially on icy snow, but scraping and brushing *significantly* help your glide, and therefore ability to control your ski.
If you're going to all the trouble to wax them why wouldn't you scrape and brush them too? Not like it's time-intensive
You should always scrape the wax off. It will make you go faster lol
The first time I waxed my whole family's skiis, I skipped all the scraping and brushing. Everyone was mad on me that the skis barely slide. It was a warm weather with wet snow though.
People, please make sure you understand that fluorinated waxes contain PFAS. They are now finding major PFAS contamination in groundwater near ski resorts. Certain produces are now making non-fluorinated waxes.
Im an advanced skier and I’ve never used wax
I didn't even know you had to wax your skiis :(
Toko Express pocket Liquid wax :)
Brilliant video. Concise, clear and expert. Thanks
Atleast an hour? Try 20 min
What about 5
@@Bas-uv6ki 2? 😄
especially if you're working in a cold shop
I used a barrel curling iron to melt-drip then press evenly across the surface. I scraped with an old credit card. It was fun!
Why does it seem like we’re removing all the wax we just added? It seems a spray would do as much.
I don’t understand. You put the wax on then you scrape it off?
why would you want to scrape the excess of wax tho? Cant you scrape it too much and run out of new wax on the base?
The wax fills microscopic pores in the ski base. It's not a thick layer of wax that helps, it's filling in the tiny holes in the ski base. It also will repel water from sticking to the ski, and a tiny layer is all that's needed to keep the bottom water free.
There are tiny little "pores" in the base of the ski that the wax fills up, giving the base a smoother glide. You want to scrape the wax off because it will create a smoother base. Don't worry, scraping the skis won't take the wax out of the tiny pores. Of you leave the wax on it will only make your skis stick to the snow and slow you down.
How long should I wait before waxing after cleaning base with rubbing alcohol?
Hi Stephen! Allow it to dry for about 20 minutes.
@@rei Awesome, Thank you.
Ok how do you clean the brushes after the waxes stay on the brush
I work at a ski shop. most of it usually comes of but if it doesn’t it still works with wax on it
I work at a ski shop too and just wash the brush with water
vacuum cleaner
Do you wax all the way to the tip?
wouldnt you like to know
Thank you for this helpful video. The unspoken thing I should have noticed about this video is that guy is waxing the skiis OUTSIDE! Don’t try this on your kitchen counter if you don’t want melted wax everywhere! 😆.
Not to mention that unless you get non flourinated wax, you're depositing PFAS in your kitchen.
wax on, wax off
Woodprix has a lot of plans to choose from.
Link to the stuff you bought??
Thank you. Great vid.
Great video, Thanks!
You need not let the ski/wax go "cold" after ironing............ Allow to "cool" to a elevated room temp, arbitrarily 100 F/38 C and rather than scrape hard........, skim at a lower angle (20 degrees) preferably with a steel "scraper" - albeit with a softened edge. Simply skim the slightly soft wax from the surface and when adequately removed THEN let the ski get "cold"/set up for last minute touch up - skimming before full scrubbing, followed by brushing with scrubbing and brushing brushes, respectively.
pretty sweet table setup
Do new skis need wax before first use ?
You can leave on the light coating of universal wax that all skis come with for your first few lessons. It will keep speeds down yet still keep the base healthy. Experienced skier: Immediately rewax your new skis, putting on a thick coat of wax chosen for your anticipated snow conditions.
You can read more here: bit.ly/3VARhVT
am i able to use a plastic ruler as a scraper will that damage it??
Rei I have this roll of wax lookin stuff that acts like wax but is doesn’t melt. What is this?
Possibly Ptex, its used for reparing your base if its gouged deeply. It melts very hot so waxing irons might not be able to melt it.
It is orange? It might be cheddar. World's most popular cheese! (Not 'round here it isn't!) Lol
Imma try do it my self
so how do it go?
Which direction am I doing all the work?? Front to back or back to front?
Tip to tail.
From tip to tail
Always tip to tail. Never the opposite direction.
Why don't they show how they sharpen the edges
tom bidwell because it’s a waxing video
Rip
Why don't they tell me how to change the oil in my 2018 Nissan altima