Это видео недоступно.
Сожалеем об этом.
POCO X3 Pro Disassembly Teardown Repair Video Review
HTML-код
- Опубликовано: 19 авг 2024
- POCO X3 Pro Disassembly Teardown Repair Video Review.
Repairability SCORE: 8/10
Twitter: / pbkreviews
Instagram: / pbkreviews
Patreon: / pbkreviews
TikTok: / pbkreviews
Smartphone Tool Set: amzn.to/3P8yZuD
Smartphone Tool Set Deluxe: amzn.to/3qLq3AU
Home Tool Set: amzn.to/43ZmSUV
Other Tool Sets: amzn.to/43VzDQg
iFixit Isopropyl: www.ifixit.com...
Smallest Smartphone Thermal Camera: www.amazon.com... (use code PBKreviews for $20 off.)
Crypto Hardware Wallets: shop.secuxtech...
Adhesive: amzn.to/2XAvFga
300LSE Adhesive: amzn.to/3pSu40W
Heat Gun: amzn.to/2SOkS0x
Pry Picks: amzn.to/3YbBi0Q
Other Replacement Parts: www.etradesupp...?acc=c5ab0bc60ac7929182aadd08703f1ec6
nice bro its rare to find teardown of these mid range xiaomi with good english and good explanation
Thanks!
Mid range?? This is high range with mid price range
@Aviation Club ya but overall is like the only bad lack point i can find. Highest level Ips lcd is also good tho plus the gorilla 6
@Aviation Club ya buts its introduced mainly for gamers not movie watchers
@Aviation Club like me lol
Very detailed clean and bright image
That's a pro right there
Thanks!
一
I literally got my Poco X3 pro repaired recently, I had to replace the main flex cable, charge type c port in my Poco X3 pro and replace the internal battery to go along with that 😁. It Allende's being nicely repaired and it's like my phone is brand new and got a fresh start to a new lease of life 📱
👍
this is probably the best and most informative teardown guide I've ever seen, great job
Thanks!
Its good to see that you are replying every comment :)
😀 I try to reply to as many as I can. 👍
Good video. Had to replace the charging port and power button after roughly over 2 years. The power button was honestly a pain in the ass, but other than that this was one of the easiest phones I've ever repaired.
👍
Its a good idea to put themal past on the Soc? Would it improve the regulation of heat dissipation? And how would it be placed?
Thank you for this video.
My Xiaomi X3 Pro had stopped charging. I had installed a new USB-C board, but that brought no success.
The problem was that I had not attached the rubbers of the old board, which were installed around the USB-C slot on the new board. That was the missing key :) its working now. 17 € for saving this gem of a smartphone.
You're welcome, glad you were able to get it working.
Jerry would be proud.. an easy to repair budget upper midrange spec phone, and the best thing is that the parts that break or wear out the most are easily replaceable, like the battery, charging port, display... It's better for everyone.
yep :)
And cant forget the motherboard which tends to short very often
@@gamewewersder4583 that's unfortunate, but I can relate as my device is shutting down randomly, but only while being used. It works for photo and video taking however, so it's not completely useless just yet. I have went back to my old phone, which after a factory reset is about as speedy as before.
My poco x3 pro's battery is dying and it drains faster than before. This video helped me to change my phone's battery and now everything seems good. The battery drains much slower like when I just got this phone. Thank you so much for this brother! 🥂
You're welcome :)
Where did you get the replacement battery?
@@subgivtara shopee
Thank you for this great teardown. It was very concise as well as being detailed. It helped me fix an issue I was having with my microphone
You're welcome, glad it helped.
@@PBKreviews indian not ohhh
Watching it in the same phone
Nice!
god tier job . clean explanation and video . now i can replace battery on my own. there's a lot of problem on charging circuit too . and i have to wait a week to fix this. wow i can just do it myself in hours. you save me! thx a lot
Thanks! And you're welcome 👍
Primer comentario en español 😜😎
Excelente video, me gustó mucho ver lo bien explicado que haces la demostración del desmontaje, bastante útil al momento de necesitar cambiar algún componente de mi POCO X3 PRO.
Saludos desde Venezuela 🤗
Hi, Thank you!
Thanks for your work and time, that video can be helpful in the future, for me and the others!
You are welcome!
Thank you for this! Now I know where to properly place my active cooler!
You're welcome
It's little down left side of the camera . Am I right?
@@aditiprasad6680 yes, somewhere in that area. 2:54 if you look on the video you can see if you watch a little further the location of the processor. The area with the most thermal paste sandwich over the copper plate. 😊😊
@@robboostph6689 ok 👌thanks for that.
Would it be possible to take out the snapdragon 860 and put it into a redmi note 11s?
Amazingly priced beast, but the cooling truly sucks. They should have made this into a metal uni body phone.
@DANIEL CHUKWUKERE WOW. IS THAT TRUE?.
@DANIEL CHUKWUKERE So, it will feel hot in my touch but the insides are not in danger, like the battery?.
@DANIEL CHUKWUKERE So, the over heating is caused by demanding graphics and the battery drains fast because of the heat or because of the graphics itself?.
Best teardown video!!!!
Excellent video. Short intro, and full of information. Loved it.
Thanks, glad you enjoyed it!
Amazing your expert!!!
Thank you!
Thanks for clip I was curious about that phone👍
You're welcome
Madarboard is main part .. all connections wired is joining this board .🤯💥
Top disassembling instructions, good video.
Thanks 👍
Fantastic. Just what I needed. 👍
Thank you for the review, it's very detail and the explanation is simple but clear.
Very nice informative video, highly clarifying the build of this phone! Thank you! Yesterday my phone, out of the blue, won't charge anymore. It doesn't react in any way on connecting it to the powercable to charge it. Unfortunately the charging part of the phone is not covered in your video.
Thanks. You would probably need to replace that sub board with charger port shown @3:39 in the video
Same happened with my phone, is it really a phone problem?
@@orestisplayz7443 After how much time after you bought your phone this issue occur for you?
Same thing happened to me! My X3 Pro is only 7 months old and 2 days ago it stopped charging. I tried different chargers and cables, plus wireless chargers. Xiaomi are willing to repair under warranty, but they will wipe my phone and I will lose SMS messages from my late Mother who recently passed away as no back up could be done. My worst nightmare. Wonder if this is a common fault?
@@shuggythebear If the data on the phone is very important to you, I suggest you go to third party and have the memory chip transplanted to working x3 pro.
Subscribed and like 👍...u deserve this 😀
Thanks!
this helped me replace my phone's battery. thank you!
You're welcome!
Watching in Poco X3 pro
Genial buen video..gracias.
Thank you and you're welcome!
Said on x3 nfc and saying again. This is one of easiest battery swappable phones for diy people.
Yup, love the fact they do this.
There is no thermal paste on sd 860. What do you think about this design?
You're right, usually there would be a thermal pad or paste between the copper tape and the processor as well, but the tape is very flush with the processor so I guess it still does the job since it has the thermal paste on top of the tape still. Not sure what the reason was for not also including one in between the processor and tape, maybe space? no clue.
@@PBKreviews bro i don't know what is thermal paste can you explain please 🙏
@@Miyamoto_x_Musashi thermal paste helps ensure the transfer of heat made from processor to the cooling copper heat pipe... understand?
@@verynice1192 ok thank you😅
It's also the reason why most of the Poco X3 Pro is dying after 2 years plus is because of this and shitty thermal design
thanks bro
it's so helpful 🎉
Welcome 😊
Excellent video
Thanks for detailed teardown.
You're welcome
Good know that the processor and memory is at upper right, no wonder why when i play game that part will be warm
Yup :)
Where is liquid heat sink that is mentioned in the specs?
@@TS0G0 inside the copper heat sink i suppose cuz i've seen some videos of Jerryrigeverything take apart some phone that using it
Appreciate you man
👍
@@PBKreviews bro it's been a year i'm worried my poco x3 pro keeps on restarting on loop for a week at least 5times a day, lastly the mobile went white screen and didn't turn on later....
Very nice! Subscribed.
Thanks!
@@PBKreviews your are welcome 💪
Great disassembly tutorial.
Thanks!
These are on offer on Amazon UK right now, along with F3. £229 and £299 respectively - or close to that anyway.
Edit: X3 Pro 8/256GB = £229 - F3 5G 8/256GB = £329 and £199 & £299 for the 128GB models in several colours.
Please make a side my side comparison between poco x3 and poco x3 pro.
Hi, I don't have the poco x3 anymore so I can't do a side by side, however I have a video of the poxo x3 teardown as well you can watch and open the videos side by side to see.
Truly enjoyed it....
Glad you enjoyed it.
What adhesive are you recommending to glue the back cover back on?
Hi, you can watch this video which will better explain: ruclips.net/video/T4iiPUIM7-Y/видео.html
New sub here... Nice work
Thanks!
Not bad. Keep it up Sir ☺️ Godbless 😘
Thanks!
Great clear explanation. Thank you🙏🙏🙏🙏
Thanks! :)
Thanks for video))
You're welcome
Can u try pc thermal paste on poco x3 pro for testing of temprature and it's googd to see the insane result...
I usually try not to use different thermal paste since every type of thermal paste has a conductivity rating. Some are more conductive vs others based of the type of material they are composed of. Using something more conductive can cause your phone to short if the thermal paste gets onto other chips or between resistors making a connection between two chips and so forth.
@@PBKreviews www.amazon.com/ARCTIC-MX-5-Incl-Spatula-Non-Conductive/dp/B08T621LGC
Arctic MX 5 is exactly that man
hi!
thank you for your great video
the POCO X3 PRO has some heating issues
but the NFC model does not have this problem!
i can clearly see why!
the PRO model does not have any thermal paste on the chipset!!!
isn't that right?
You're welcome. Yes you are correct, it seems it has thermal paste on the outside but none over the chipset itself. Seems kind of odd why they would not include it. Usually some sort of thermal paste or a thermal pad is needed to properly draw heat away from the chipset to the other heat transfer materials.
have models without nfc?
@@Airihav previous commentor was comparing it to the poco x3 nfc i assume not x3 pro nfc
If they had used a good amount of thermal paste, those phones would never have died.
At last someone did this
👍
Thank you sir
You're welcome!
Thank you for SPEAKING. Most of the videos have become silent movies. I can't stand them.
You're welcome 👍
Thanks mate I really needed an English speaking
👍 you're welcome
Is there any piece that holds the volume buttons? The repair guy I've sent this said the buttons were in pieces when he opened. He just made some fixes so that the buttons are tactile except the button keeps falling from the case and only the vol down is working
If you can find a replacement button, you can pull the old one out and push in the replacement. It just pops in from what I can tell on this phone. Nothing really internally holding it in place.
Hi! What kind of adhesive you use?
And maybe you know for what reason this phone discharged to quickly?
And why u battery li-ion but about my battery in some apps writing like li-pol?
Im not able to remove the backplate. 3 questions. 1) how safe is it to apply heat? 2) Whats the estimate time of applying heat (with a hair dryer) before im able to remove it? 3) do i need a special item to do so or is for example a guitar pick sufficient? Thank you for the video!
Hi, its safe, just use a hair dryer instead of a heat gun which is safer against damaging anything. You can gradually heat it so its hot to the touch, just move it around all areas to evenly heat it up. Then you can use a suction cup tool to help you lift up and pull up a side or corner to get your guitar pick in, then you can apply more heat as you work your way around prying it off. You can always use a metal tool like a razor blade etc to get in between the glass and frame without using a suction cup tool, but you would scratch up the frame.
I'm using Poco X3 Pro 😊 but I want to ask you one question: why is this phone is slightly heavy 215g... Is there any reason... Or inside the Copper Liquid cooling plate makes it weight..???
Its probably a mix of things like the materials in the frame, the battery, and other components like the copper heat pipe etc.
Big phones with big batteries are usually heavier, and since this phone has a powerful 5160 mAh battery, it will be heavier.
3 Years after vide release. My mics are not working, is it possible to repair them or have to replace boards ? TNX
fingerprint logic. Thks
Great videos
Thanks!
1:35 Can I add graphene copper sheet there?
Thanks 😄👍
Very nice
Thank you 😀
Thanks for the review. Poco X3 Pro is a cool smartphone. 🔥✌️😎
Everything is fine, but it’s interesting, can I lubricate something over the processor or somewhere so that the phone doesn’t get very hot?
You can change the thermal paste and add a better thermal paste which can help. Just make sure not to use a thermal paste that is highly conductive so if it leaks or spreads to areas you don't want it to be, it won't short the phone.
I m watching with my poco x3 pro...
Nice!
Assistindo do meu poco x3 pro.. espero nunca ter que abri-lo
Nice. Yup hopefully you won't have to :)
Great video! What size screwdriver is needed for the phillips screws?
Any smartphone Phillips screw driver should work, but I believe a size 1 or 2 should work fine.
My battery DIDN'T come off easily, I had to fucking prybar it with a sword-shaped keychain. Otherwise yeah this guide is on point.
Shouldn't be that hard. You can always apply a little heat with a hair dryer or use isopropyl alcohol. 👍
Nice bro
Thank you
So cool
👍
something missing as the top panel is still connected i guess it is the antenna, and was the reason for consultincv the vid.
ما شاء الله ممتاز جداً
Thanks!
Gyro auto moving ka issue bhi Motherboard issue me hota h kya?? 🧐
I have a question.. At what part is the antenna band on the phone.. Is it the same with the nfc antenna?
Hoi, i know i'm late to the party but i just noticed something funneh...
The X3 NFC and the X3 Pro seem to have literally the same layout between them,
Would you think that if i would take the logic board of the X3 Pro, will it fit the X3 NFC variant? i dunno, a ghetto upgrade, i'd say but would it be feasible? :D
Good job 👍
Thanks 👍
Hello, can you change an lcd display for an amoled? for the POCO X3 PRO??
hi man! is poco x3 screen compatible with poco x3 pro ? i cracked my poco x3 pro screen and i cant find any replacement part
i have the same question
try it and report back here!
Yes its the same screen for both.
Hey Razvan Did you know if the screen worked for both cell phones? I'm in the same problem rigth now
@@Eliucinhovarela does it worked?
Looking at the design it look like most of the heat produced by soc is dissipated to the screen by a heat pipe, i wonder if i put a thermal pad on the back of the soc so that the heat can transfer more efficiently to the back cover would work. Or a paste if a pad is too thick?
I'm not sure if it would help much but I don't see it being a bad thing. In general, replacing the thermal compound or paste on this phone to a better one should help a bit.
@ 2:12 I can see that there are 4 lens on the camera module but when you take it off it just shows one big lens on the lower right (in my pov) so does that mean that the other 3 lenses are just for aesthetic/design purposes? Please correct me if I'm wrong and please do enlighten me on this as I'm new to your channel.
Hi, all the cameras are real and work. You can see those other 3 camera lens cables disconnected from the main board prior to taking off that assembly which holds those 3 cameras. And welcome to the channel :)
Great thanks 👍
You're welcome! :)
Thank . Bro!
You're welcome!
Eh, tearing down and reassembling didn't make this piece of junk work again, it is what it is. Thanks for the video!
I got my POCO X3 PRO repaired; CPU reballed, RAM extended and smth UFS error. Everything is fine but Gyro, Magnetometer and Accelerometer aren't working. What might have happened? Could you please help?
Hi do you know if there is any way to reduce the vibration of the phone, since apparently when the sound is considerably loud the rear and bottom begins to vibrate noticeably, it can be a bit annoying.
that's normal for 2 speaker phone,get used to it
3:22 very strange poco did not put thermal paste on the SoC that's why the heating issues and some are bricked because of that design mistake, It feel me to put a better thermal paste because that's little to me
Yea, a bit surprising.
Very detailed and excellent teardown Sir. Anyway, there is an annoying and aggresive vibration from, I dunno the vibration motor or speaker from this device. If I may ask, is the vibration motor removable? Or is there a way to minimize the vibration from the X3 Pro? Thank you.
Thank you. The motor is held down with adhesive and is removable. Might be a faulty vibration motor. When do you hear the noise?
Frame plastic or aluminium
aluminum alloy
I saved this video, because I will try and fix my phone myself
👍
So the Gaming Cooler for Mobile, can't really do its job to cool the CPU or Processor? Because its on the side of the Camera
I had to replace a spicy pillow and was surprised by how easy this phone is to repair despite being glued shut.
👍
Do you have to apply any glue or similar when inserting again the black plate? Without any glue does it come off easily?
Yes, you can watch this video to see how: ruclips.net/video/T4iiPUIM7-Y/видео.html
@@PBKreviews Thanks
some people say that the heating issue is due to no thermal paste on the phone, is this true? Could it be a software related problem?
It's definitely possible. The thermal paste was not the best I have seen lol. Replacing it could help, also the copper heat pipe looked much cheaper than the one used in the prior X3.
My Poco X3 died today. After a couple of days were the screen went "blue" with an immediate restart following that, it now remains at a black screen. No more reaction when pressing any button and/or plugging the charger in. Which of the shown components could most likely be the culprit?
My poco x3 stopped vibrating full stop, is almost new and im very disappointed , do u think i should to replace the vibrating motor?
im thinking of replacing my poco x3 pro and was wondering if the sd card is soldered into the phone or not
Great video! Do you know if I can put the LCD screen of the Poco X3 NFC in a Poco X3 Pro? Is there will be any problem of software compatibility? Thank you in advanced
Hi, I believe it should be the same and work fine.
Hi I have question.
I have poco x3 pro which has 48 megapixel camera .i am thinking to buy poco x3 camera that has 64 mp camera and 12 mp ultrawide . Will it be possible to change .i will buy spare part of it .pls reply
Not sure, I haven't tried it. It might or might not. There might be software issues but not sure.
@@PBKreviews thanks