Fix Stuck Razor MX650 Forks!!
HTML-код
- Опубликовано: 17 окт 2024
- Disassemble, fix, lube, and reassemble stuck Razor MX650 or MX500 forks. If your forks are binding and won't move any more, this video will most likely get them moving again. I also show all of the internals and parts of the forks and how they work.
Thanks for the info Tim! This issue occurred for me literally within a week of my 9 year old getting his 650. I was able to use extensions and make my own tool to remove the Allen bolt and glued weed whacker line around top of the bushing to make a new lip. So far soo good.
Thanks for the video my mx500 has a busted white plastic piece so I’m hoping to replace it and this might be possible without replacing the whole thing now that I see how it is assembled.
Cool! Hope it works!
Will a 12 inch bit holder work?
Thanks for making this video.
Would you happen to have any measurements of the springs and bolts that go up the fork leg¿? I'm trying to get bigger springs and bolts to makes my suspension ALOT better but IDK what the original parts measure.
I don't but there are guys on the "modified razors" Facebook forum who have done what you are talking about and have the specific parts you need
Great job
Install a 48v 30Ah Lithium battery in your Razor MX650!! It's a tight fit, but will fit in your MX650 or MX500. I estimate this will give you 3-4 hours of constant hard riding run time with the 1800watt 48v upgrade. Please like and subscribe.
ruclips.net/video/4XnDhtz9sRg/видео.html
My bushings are worn out,they have a lot of play in them. To bad you can’t buy parts.
I know a guy who 3d printed them. I helped him with the 3d model. I can connect you if interested
Tim Armbruster That’s pretty cool,I have the MX 500 model which is probably the same..but not sure.
@@TimArmbruster I'm interested. I would buy a few depending on his price. Does he have an email address? Thanks for the video too, by the way.
@@rx3701 If you are on Facebook, join "modified razors" group and ask about them. If not, let me know and I will try to put you in touch. I only have Facebook contact.
@@TimArmbruster Hey Tim I found a guy in that group that 3d printed the bushing, but he says his printer is having issues. Is it a guy named "Don" that you were referring to?