Woods riding with Spike Tires on my Raptor 700!
HTML-код
- Опубликовано: 9 фев 2025
- I finally tried these snowmobile studded tires off the lake and they were a ton of fun! I was nervous about how they would hold up but they handled a variety of terrain really well! I'm going to really keep an eye on the sharpness of the snowmobile studs if I continue using them off ice to test their longevity.
Check out my Website! www.petehager....
2019 Yamaha Raptor Special Edition
HMF Full Exhaust System
Power Commander 5
Pro Taper Contour Bars www.rockymount...
Pro Taper Universal Bar Mount Kit www.rockymount...
ESI Extra Chunky grips amzn.to/2S94WWm
Pro Armor Bully front bumper
Pro Armor Nerf Bars
Alba Racing rear grab bar amzn.to/2FLPgmp
Alba Racing gas cap amzn.to/2FYuz5Y
Upp Racing case saver
Moose Racing wheel spacers
GYTR A-Arm skid plates bit.ly/2BacjTM
Warning Plate Delete
Intro Music-"Dynamite Dust 2" by Jack Elphick
Tire Swap Music-"The Drop In The Club 3" by Niclas Gustavsson
1st Person Filmed with GoPro Hero 7 amzn.to/2MHvxVl
3rd Person Filmed with Nikon D3200
MotoVlog Mic: Purple Panda (10% OFF) www.purplepand...
**Must purchase GoPro adapter to run microphone amzn.to/2SjdM3O
3rd Person Mic: Rode Microphone amzn.to/2MLe6n2
Big thanks to Todd Tanhoff for letting me use his Nikon Camera!
Links in the description are typically affiliate links. If you click on one and purchase, we’ll receive a small commission. This helps support our channel and allows us to continue making videos like this one! As always thank you very much for your support!
Follow Me On:
Instagram- / pete.hager
Facebook- / pete-hager-media-21519...
#savesportquads
congratulations on 15,000 pete. heres to 15,000 more!
RaptorMan thanks man! This is pretty nuts how fast it’s been growing. Those 2 uploads did wonders for my channel! I can’t wait to ride with new people!
Im here at 107k lol
You have the best looking, sounding, and set up on your raptor.........when I watch your videos I wish I had one...... I'm a raptor fan
I'm a Banshee guy through and through...but if I were to own a Raptor, I would hope it would be one just like yours. Badass machine man!
Thanks man! Someday I'll have a banshee too :)
Exceptional video, beautiful country, great machine, with the best exhaust sounds I've heard getting that exhaust, along with Alba arms, and few other mods, looking forward to seeing other videos of snow riding
Another killer video, great shots, great quality.
Pete Hager you have to try these in the summer on grass. I bet they hook up amazing!
Sell the lawnmower
Airrate the lawn haha
Haha that would be quite the site to see! 😲🤔
Imagine the views 😵
@@ononewheel7 lol that would definitely get some attention if I filmed it right. I think it's a pretty funny idea, now I need someone to sacrifice their lawn
Awesome dude! What an amazing place to ride and that exhaust spout sweet thrashing up the valley 🤘🤘awesome video bro
awesome video! and wow, those spikes are bad-ass!!
Absolut Cooles Video wie immer!!!!
Danke Pete 👍
Great video
Nice riding 👍
Next Adventure thanks!
that looks way too fun!
Awesome! This video is gold!!!
so sick!
good vid man...i was rippin in snow 3 days ago with a raptor and 2 yfzs on my last video lots of fun
I just figured it out why you REALLY record..it gives you a sense of purpose on the raptor..like something to do. Riding is always fun but can be sometimes boring or lonely when you’re alone.Its hard to put into words, But you know what I mean.
Snatch Block I was definitely inspired by old riding videos when I was a kid. I started filming videos in high school until my early 20’s and then picked it back up again when the Hero7 came out in fall of 2018. I’ve always loved listening to quads from a distance and it’s fun to capture that! This video has some great exhaust notes 😊🤘
Pete Hager well what you’re doing is pretty cool man. Carrying the tradition of great riding videos and becoming part of that Quad history. People really get excited in other videos you feature, so you have a positive impact and probably inspire people to create and ride and be respectful etc...thanks for being cool and thanks for riding the little O in Michigan... that’s where I ride and it was cool to see on RUclips.
Snatch Block all awesome to hear man thank you 😊
The little O trail is still one of my favorites and I only got to ride a quarter of it! I can’t wait to return to finish it someday! I can’t wait to start doing subscriber meet ups again
Pete Hager yeah I’m willing to bet you’d have a pretty serious meet up in Michigan especially the little O area.. that’s all they do in that area is ride. I’ve been watching your vids all day cuz it’s too hot out to ride right now..
Would look good with some RuKind black headlight covers on it. Blacks out your lights except when on. There are Yammy branded ones as well. Keep up the good work.
Another great video! Thanks
Amazing content. 😄Keep it up!😎
LOVE THE CONTENT!!!!!
09:10 man u nailed it with that...;- ()
I was pretty stoked when the sun came out later in my ride!
Very cool!
you must feel the weight in those tires!
You know your hooking up when you just pull the front in all that ice and snow.
Traction ✅
Love ur raptor
Does sound great. Even my stock can am sounds good in the woods but could sound way better. I'm running screw in studs . 15 mm with only 1 mm carbide tips. So not aggressive at all but they seem to keep you somewhat safe on ice. Haven't lost one yet.
Forecasted to get 6 to 9 inches of snow....ronnie mac is smiling somewhere right now
Yo man. Love the videos. I have a red 19 as well with only 2 hours one it. I am breaking it in like the manual says but I am getting a chatter sound from the motor during acceleration
Thanks for checking out the vids! Mine makes rattling type noises at times.. A lot of it is chain noise for the most part. My front brakes on my old machine would make noise sometimes too..
How did you get those spikes in so good, when I did mine a couple would fall out like every other tank
Grey Heckman i didn’t make the tires. I bought them this way. I was amazing how durable they were. I thought I would’ve ripped one out on one of these rides
tardsquad was here!!
Would you recommend these stud or snow tires from a newer video?
Super likes keepo👍🏻
great vid, hand guards might help keep cold air from blasting your hands.
vegan demon not a bad idea actually!
Powermadd handguards would be a good addition. I really like the ones I have on my Honda. The only problem was finding room on the bars to mount them.
What year is your raptor?
It’s a 2019 👍
Okay thanks because I started saving for one
@@thetrainmaster.100 awesome! It’s a great color combo that’s for sure! 🤘
@@PeteHager yeah, I like the red, and your the whole reason I like yamaha
cool
Do you do your edits on your phone or computer? What program do you use?
jb awesome rider 420 I’m using a MacBook Pro and edit with Final Cut Pro
Where did you get the tires? I'm looking for my 660.
I bought them all studded up off craiglist.. I was very lucky to find them. They have 1 inch woody's snowmobile studs in them. The tires work super well but if anything theres too much traction at times. I'm planning on making a regular set with screw in studs 👍
@@PeteHager awesome thank you
you run heated grips in winter?
The way your quad is popping on deceleration is indicating either a lean condition or an exhaust leak. My 700r never popped on deceleration running full aftermarket exhaust with an EFI controller. Are you running an EFI controller with your pipe?
I'm sure this chap is running his quad correctly. Most pop all the time anyway. I know atleast 20 lads with quads and they all seem to do the same. Surely we can't all be set up wrong? Or is it because of the cold air. Also sometimes you get a loud bang when riding in cold when coming down from speed fast. Cold air sucking in the pipe. Apart from what you previously wrote. What else could it be?
I have a power commander 5. It was popping worse but I had my dealer re-flash the controller. It pops here and there but it doesn't seem to be an issue. My previous machine was the same
It very well could be the mapping for which I should've mentioned. Just in my experience its usually lean or sucking air somewhere in the pipe connections. I have had to replace header gaskets before to get the popping to stop. Either way I noticed in your other vids & after watching this vid decided to mention it. Sure it still can be running like a top just with a pop lol. Sweet bike though & as usual love the vids. 👍👍
Pete Hager
Yeah the Ktm quads pop on decel from the factory as the exhaust header doesn’t sit completely flush against the engine. My 525 popped on decel up until I changed to an aftermarket exhaust system.
Get it dyno tuned for a much more accurate map
I’m getting a 2019 Honda trx 250 tomorrow I’ve heard it’s a great fourwheeler but how fast is it?
Congrats!! Honda makes very reliable products, I'm not sure what the top speed is on the 250?? I would assume theres some youtube videos that could help you!
Pete Hager ok thanks love the content
60 at the most
I didn't see it on your list. What kind of Helmet and Goggles do you use?
The Thor helmet I use is several years old. I’m hoping to replace it soon, I haven’t started looking. I’ve been using 100% goggles, I like them so far 👍
@@PeteHager Thanks for the info. I was looking at the Revzilla website and trying to decide whether to get a Snowmobile Helmet or a Dirt Bike Helmet. Some of them have the goggle/face shield built into the helmet and some don't. I suppose that separate goggles are better because you can clean them easily.
@@OU8Aspark hmm if it’s strictly for the winter that’s up to you. Snowmobile helmets are pretty practical and will be warmer, plus their designed not to fog up. I don’t ride snow much or I would maybe invest in one.. I’m assuming you have a summer helmet but if you don’t you might as well get a regular one 😅👍
The four-wheeler I have is a 1986 suzuki 230 quadsport
My dad got one when he was a kid and still has it
Hey Pete can you set me up with a link for the grab bar “plate mounting” parts I can’t find a setup like yours to use my plate
I'm assuming you're referring to the license plate? The mounting plate is a factory plate that they started using the last couple model years. I don't think it will directly bolt up to older models. I would go to your local Yamaha dealer and see about fitment since it's an OEM Part. I bought an aftermarket rear grab bar that had the mounting points for the new plate. It's linked in my video description
God bless spread his word!
Its been 35-55F here and i havent been out riding because of it. IDK how people ride in the snow haha. Maybe if my feet didnt instantly freeze i would still go out and ride.
Trivelino10 you definitely have to dress for it. The hardest part for me is keeping cameras warm. They like to freeze up unfortunately
Cool
I almost say winter riding is better than summer riding sometimes?!..
You know nobody is going to diss you if you buy a snowmobile to ride on the snow, right?
;)
Our winters are spotty and most of the time there isn't enough snow to ride a sled. The northern part of the state gets considerably more snow than we do. Last winter was the most snow we've had in years
@@PeteHager I'm just giving you crap man. Love the vids. I'm actually from SE MN myself so I know all too well about the spotty weather. I literally just watched your video at Hurricane Hills before I saw your comment here. I grew up in Zumbrota, so right down the road from Mazeppa. I just bought my first quad since having them growing up, so it's been 20 years for me. Bought an '03 400ex so naturally I started watching your videos and found out you were also in southern MN.
I do have a question if you could help out a new again rider. Where's the best place to get information on where one can ride ATV's? I know that each town and township can have different ordinances and rules, but is there a general rule where you can ride them on county roads? I saw vids of you riding in ditches, can you still do that or does that depend on where you are? I'm getting mixed information from people and the Department of Natureal Resources information seems quite vague. Anything would help out. Thanks a bunch for the videos. Great stuff!!
@@James225 Nice to hear from another Minnesotan! You know all about our unpredictable winters lol Thats awesome that your getting back into the sport! The more sport quad riders the better! Here's a link showing the cut off for ditch riding between April 1st and August 1st. www.outdoornews.com/2011/04/09/minnesota-dnr-reminds-riders-of-atv-ditch-riding-restrictions-in-agricultural-zone/
As far as riding on county roads the best thing would be to call your local DMV/Government Center and hopefully they can tell you whats allowed in your area. I followed the "MN ATV Riders" Facebook page and they're very active during the regular season. It's nice to see photos and hear what people have to say about certain trail systems. I use this website a lot when I'm looking for new trails to ride! www.riderplanet-usa.com/
What bend are your handle bars?
They're the Pro Tour Contour "ATV Mid" bend. I have them linked with the clamps I used in my description
Where in mn are you from. I'm in mn and nd
MidnightPolaris800 I’m in the Mankato area, where are u in MN?
@@PeteHager near Detroit lakes mn
@@MidnightPolaris800 theres good riding in that area isnt there?? I'm looking to ride the northwoods a bunch this year! Do you know a lot of trail systems up there?
Apa bisa ber jalan
Learn how to shift bud
Isaac Aubel shut tf up
Diamond Joey why’s that
Isaac Aubel he can shift fine
Diamond Joey can he tho?
Isaac Aubel I don’t get how he couldent i mean...
What mufflers you got on your ram?
It has a Muffler and Resonator delete