Lavazza coffee machine problem

Поделиться
HTML-код
  • Опубликовано: 25 окт 2024

Комментарии • 23

  • @XRL8omnitrix
    @XRL8omnitrix 8 месяцев назад +4

    I have similar issue but my one it is slightly worse as my silver lever pops up with the pressure and the coffee falls in the capsule tray.
    My machine is out of warranty of 2 months and Lavazza won’t fix it.
    They suggest to buy a new machine from them 😅
    I assume the issue it has something to do with the mechanism that keeps the silver lever locked in down position.
    You could try holding the lever with your hand down as I do and see if the coffee comes out.
    It works for me even if it is not ideal but for now would do until I’ll buy a new machine.

    • @PaulSinnett
      @PaulSinnett  8 месяцев назад +1

      Yes, mine broke down out of warranty too. I suspect it's a design flaw in the model. I've moved on to a bean to cup machine. But that requires constant cleaning. When this one breaks down I think I'll go for a separate grinder and an air press.

    • @thehandyman1985
      @thehandyman1985 7 месяцев назад

      Hello!! Here's the Handyman from Italy! I left a comment above with a link to a video how I solved it! I link here as well
      ruclips.net/video/0YAOFWxax-c/видео.html
      In my channel you can find other videos on coffee machines and much more! @@PaulSinnett

    • @DeusXM
      @DeusXM 5 месяцев назад

      Same happened to me. I bought the machine yesterday and its not working right now. I Did nothing wrong 😢

    • @nikitagm5015
      @nikitagm5015 13 дней назад

      I have the same issue and thought that descaling will fix it. Descaled 2 times with even more concentrated solution to water dose and didn't fix the issue. I guess I will have to keep holding the lever every time I try to make a coffee...

  • @helenmacdonald-taylor3070
    @helenmacdonald-taylor3070 Год назад +1

    We have this problem too. Have you found a solution?

    • @PaulSinnett
      @PaulSinnett  Год назад

      Sadly no. I made that video for the customer support team at Lavazza. They said it needed to be repaired, but my machine was out of warranty. I took a look inside, but the bit that was failing was sealed and not apparently maintainable. All I could do was take it for recycling. I've gone for a bean machine this time to avoid getting locked in to those coffee pods.

    • @jimmywaters8929
      @jimmywaters8929 Год назад +4

      It could just be the video, but it look like no you’re capsule lid was not all the way down, hope you find a solution

    • @lukassnek598
      @lukassnek598 9 месяцев назад

      I had the same problem. I found that solution but wasn’t able to fix it for good. There is rubber pipe that brings the hot water under pressure to the capsule and it came out of the outlet. That why the hot water goes directly to the waste bin. I put it back a couple off time but it always got off the fitting again.

  • @carlosanzone3986
    @carlosanzone3986 3 месяца назад +1

    O notato la capsula dietro non e forata bene !!!

  • @carlosanzone3986
    @carlosanzone3986 3 месяца назад

    Buona sera ma usate le capsule originali!!!

  • @houdamastro2578
    @houdamastro2578 8 месяцев назад +1

    come decalcificante la macchina lavazza mug deséa

  • @mircobob3067
    @mircobob3067 7 месяцев назад

    E' la pompa dell'acqua. Difetto cumune. Il problema che identica a quella originale è impossibile trovarla. Ce ne sono simili che vanno bene uguali. Costo 15/20 euro.

  • @mounir1777
    @mounir1777 8 месяцев назад

    Any solution ?

    • @PaulSinnett
      @PaulSinnett  8 месяцев назад

      No fix. My solution was to dump the machine and get something else.

    • @doiaru22
      @doiaru22 6 месяцев назад +2

      @@PaulSinnett i just bought an used one, has to arrive yet.. because one of my colleague has it and i like it. I fix things, and also i`ve moded 2 machines, and repaired about 5, my advice is to clean the pins that punch with a toothbrush. Or try another brand capsule, that lot of capsule might have the plastic too thick. If necessary want to finish that capsules try to make holes with something before inserto into machine. Also use a small mirror, like the dentist mirror + light to inspect the punch holes pins. Good luck

  • @carlosanzone3986
    @carlosanzone3986 3 месяца назад

    E sempre meglio usare le originali Lavazza!!!

  • @bosiorne2292
    @bosiorne2292 6 месяцев назад

    Worse machine ever before it was good quality now is bad I bought tiny eco temperature is to high and coffee is not very good tasting Better If I bought the jolie

  • @tindogmedia1216
    @tindogmedia1216 Год назад

    Close the top silver lid down all the way until it clicks - you haven't closed it properly

    • @StrawberrySky64
      @StrawberrySky64 11 месяцев назад

      How, if that is impossible?

    • @billyhill5622
      @billyhill5622 2 месяца назад +1

      nah, my machine just has the same issue. the lever cannot stay down after you hit start button

    • @enricomarasco3146
      @enricomarasco3146 Месяц назад

      @@billyhill5622 Any solution ?

    • @billyhill5622
      @billyhill5622 Месяц назад

      @@enricomarasco3146 Not really, I switched to nespresso