Can you tell me why certain boards stop allowing display input on ports 1-3 and only work on port 4 (media) port? and sometimes this will flip back to only allowing 1-3 and not port 4??? It it a gremlin/bug, or is there a remedy/fix for this??!?
Do you know what it means when the m600 power button on the projector is just an Amber color ? I connect the laptop to it and the screen won’t turn on either
I no longer work with these boards, but this might be of help. community.smarttech.com/s/article/How-to-manually-restore-interactive-displays-when-stuck-on-the-Updating-screen?language=en_US
In a case like this, you can try. However most likely the lock screen will persist on start. Because the unit runs on base android utilizing the factory reset button may be necessary. This will completely erase everything though.
Turning off the switch will work, but it is not safe to do so, as it can brick your board. I've said this on another comment: Press and hold the power button until "Slide to save energy appears" Then slide and afterwards wait until the board's light turns red, turn it back on again. You should be greeted by the SMART logo followed by a loading icon. If you have an OPS module plugged in, your display may instantly boot to there instead of IQ. To fix this, press the HOME button on your display
If the home button lights up it's not an issue. If the light turns green and the board turns from black to grey, it is also not an issue. If the board light turns green, and nothing happens you can contact smart support now
Check if your OPS module is seated correctly. You may also need to replace it, otherwise, you can contact SMART support. If the home button lights up, that just means it's trying to boot
Hello We have problem with smart board in our school. Kids put password then they forgot about this . Now we could not use it . Please help how we can unblock
Press and hold the power button until "Slide to save energy appears" Then wait until the board's light turns red, turn it back on again. You should be greeted by the SMART logo followed by a loading icon. If you have an OPS module plugged in, your display may instantly boot to there instead of IQ. To fix this, press the HOME button on your display
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Can you tell me why certain boards stop allowing display input on ports 1-3 and only work on port 4 (media) port? and sometimes this will flip back to only allowing 1-3 and not port 4??? It it a gremlin/bug, or is there a remedy/fix for this??!?
Hi there,
I cannot locate the "recents" button on the Smartboard in order to split the screen. Any tips?
Do you know what it means when the m600 power button on the projector is just an Amber color ? I connect the laptop to it and the screen won’t turn on either
Having lag with pens. Already restarted it. Any other suggestions?
How do I connect and view files on my usb?
Do you know how to lock and unlock the screen to keep the kids from constantly playing with the screen
Yes please
On screen keyboard does not appear when trying to edit a Word Doc or type on a blank screen, but does appear when searching a RUclips video. 😧
I've got a frozen mouse suddenly on smartboard and the green light is blinking. It's been all updated too. Hmm..
Hello sir i am the moniter of my class so when i open the baored it shows rainbow so is the solution that button only?
I’ve got one stuck in a boot up.
Just says smart and stays hung there.
Tried various power off techniques and it’s still happening
I no longer work with these boards, but this might be of help. community.smarttech.com/s/article/How-to-manually-restore-interactive-displays-when-stuck-on-the-Updating-screen?language=en_US
Will turning off the switch work for someone who's locked out of the smart board because they forgot their pin code?
In a case like this, you can try. However most likely the lock screen will persist on start. Because the unit runs on base android utilizing the factory reset button may be necessary. This will completely erase everything though.
Turning off the switch will work, but it is not safe to do so, as it can brick your board. I've said this on another comment:
Press and hold the power button until "Slide to save energy appears" Then slide and afterwards wait until the board's light turns red, turn it back on again. You should be greeted by the SMART logo followed by a loading icon. If you have an OPS module plugged in, your display may instantly boot to there instead of IQ. To fix this, press the HOME button on your display
THANK YOU SO MUCH!!! You just saved my day !!!
Sat once my smart board lost every thing on the screen.power comes.Only vissible word is SINGER .help me please
Display not in bright and very dull, how to rectify
How do i conect it i pushet it in but noting lol i press power button noting i have green licht and it clicks when switching power on
If the home button lights up it's not an issue. If the light turns green and the board turns from black to grey, it is also not an issue. If the board light turns green, and nothing happens you can contact smart support now
How can unlock extramarks smart board in school
wow...glad I watched this!
I have an issue that the Browser won't play any videos.
attempted connecting to multiple networks. same issue. Help please?
Are you getting a specific playback error that is being listed on the video frame?
A work around to test would be in the browser click the 3 dots on the upper right side. Then look for an option that says "Request Mobile Site"
Hello hi. I have the problem like my screen show no picture. Nothing on the screen.
hdmi cable needs replacing
Check if your OPS module is seated correctly. You may also need to replace it, otherwise, you can contact SMART support. If the home button lights up, that just means it's trying to boot
Ours will not go past the blue smart startup screen, the pinwheel just spins
Newline touch disabled. Ugh
I did and it's not working
How to unlock screen
Very helpful video,thanks for your sharing,sir
i am not able to start it on
On the first boot, your board can take up to an hour to boot
Hello
We have problem with smart board in our school.
Kids put password then they forgot about this .
Now we could not use it .
Please help how we can unblock
Press and hold the power button until "Slide to save energy appears" Then wait until the board's light turns red, turn it back on again. You should be greeted by the SMART logo followed by a loading icon. If you have an OPS module plugged in, your display may instantly boot to there instead of IQ. To fix this, press the HOME button on your display
Note: You have to slide to the right to shutdown
Good
Not at all
Hello sir . i have problam , smart board only work ony side , how to fix??? and need your email adress for contact you
Sir, password forgot then do what?
I no longer work with these boards, but usually there is a factory reset button that can be accessed by a paperclip on the android module.