Roblox OneSkyVed's Trolleybuses Place (indev) - how to start and how to do a Route. (doing route 10)
HTML-код
- Опубликовано: 16 май 2022
- Play game here: www.roblox.com/games/23371029...
#roblox #trolleybus
credits:
"music elevator" Jay_You (freesound.org/people/Jay_You/...)
Licensed under Creative Commons: By Attribution 4.0 License
creativecommons.org/licenses/... 
Игры
Nice
ok, what I have seen in some other videos is....before the switch(it doesn't automatic.) press "E" to switch right and to switch left, press "W".
Here is a comment from Noname: ("Well, for example, too high a speed, worn pole heads and remember that when you want to go to the right you do not have to press the accelerator pedal. Also, if your compressor is still running, to switch to the right you will need to turn it off (E) and after going through the switch, turn it on again. Going left is easy - just press the accelerator just before the switch.")
I wanted to put something here but I forgot so ye
for ZiU-9 poles switching, look at your control circuit, if the switch is facing left, your poles will turn left, if it facing right, it will go right [Keybind: E]
for routes, I will list down the routes below:
Route 6: Start from Hard Bass Island depot, then switch left to start
route 9: start from Main island depot and head to skyscraper area
route 10: start's from main island depot onwards
route 14: same as route 9
route 16, same as route 9 and 14
for ZiU 10 poles switching, there is two switches: switch left and switch right [Keybind Q & E], to turn left on a switch, just hold the switch left using keybind and hold it till you cross the switch, and to turn right on a switch, do the same but with the switch right
Don't go faster than 15 over the switched and not over 30 in hard turns or the panthograph will fall off
Informative video, already I know where to go on this route. But also on 7:47 how did you reverse the bus? I’ve adjusted the wrench and it doesn’t seem to move
Have you accidentally set the Wrench to "Neutral"? Obviously, it's not going to move if that's the case.
You have to set the wrench all the way back.
@@norbert099 oh yep, I did. Did you hold a specific key while doing so? I tried holding w to reverse, didn’t work for s either
@@SMB1559J it's almost the same with the gearsystem from a car. You put it in reverse and then step on the gas pedal.
@@SMB1559J mouse right click to put wrench in reverse but don't click on the wrench directly or else you take it off like that.
But you can left click on the wrench directly
so we dont talk about him having -58 driver points
i think he ran so many red lights
mine is doesnt show up the route set
I put the line things into the lid, but the game doesnt recongnize that I am driving a route, is there anything more I need to do?
Usually not.
Have you put all 3 line "things" into their place?
Same
Norber are my músic test Roblox studio
how do you put the passenger in the seat I have route 10 im in the lighthouse and i cant put passengers in my bus can someone help me
When arriving at a stop, it should let passengers in/out automatically by setting parking brake and opening doors.
You probably are doing something wrong.
Have you placed all 3 Planks? One small one and two long ones for Route 10?
@@norbert099 I put the parking brake and opened all the doors but still they werent going in and I put two planks but whats the other one can you tell me
update: i got it working i forgot to put the other plank thanks for the help norbert leaving a like :) and maybe a sub too
I have also a trouble when doing routes my bus kept stopping and it cannot go forward
Me too, I can't move it again
Does this happen after the connectors go through a "switch"? Or are you driving too fast?
Sometimes breakers go off on there own.
MY bus randomly stopes, even tho I have the poles conected, and the gearbox set to forword, and the heads at 100%
Haven't you checked the Breakers behind you while driving? Sometimes the Breaker pops, especially when you drive uphill.
It does happen really often on the big bridge.
@@norbert099 Hm I havent, will look next time if it happeds
Also what doI do when the pooles snap off the wire during the intersection?@@norbert099
you simply put them back on but if you are too far away from the wires, then you either have to reset or ask for a tow.
it dont show me where i should go and where should i park bruh
Did you do everything right?
Also, this game has a Map which can help you to navigate through the...Map.
t@@norbert099 thanks!!!!!!!
BRUH THERE IS A THIRD BOARD???
*yes*
your tutorial doesnt work
Maybe they changed something in their game.
Or it's my video being a bad tutorial or it's you being bad at understanding it.
I'll check out their game if I can.
sorry, i just forgot to install side route panel xd
Bro same, I only put the back and the front one, I was forgetting the side one
Good tutorial btw 👌
same :/ its akward@@gazlover2.0.