I have a cisco project to make for college, and one of the tasks was "configure static routing so each device can communicate with another". Do you know how i do that?
Yes, notice the only thing he configured were IP addresses on the router interfaces (g0/0 & g0/1) and the IP addresses for the end points (PCs). These switches are L2 devices, and do not require IP addresses for communication. Only for remote access, which is another topic. I know I’m late but, oh well! Lol
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
is the router by default allow all traffic from one port to another on its firewall, bacause you put 192.168.1.1 255.255.255.0 on g0/0 port and on g0/1 is was 192.168.2.1 255.255.255.0... if the router by default firewall rule allow all all that is fine, but if the other way around.... it is more sense if the ip of g0/1 is 192.168.1.2 or up to .254 255.255.255.0, base on the goal you want to do is send data from pc 39 to pc 42
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
You really dipped after giving us a banger on Cisco.
thanks for showing the basics bro, 3 years later and still helpfull
Very clutch video! Thorough and easy to follow. Appreciate the help bro !!
Thank you very much. This is more handy than the whole day in class
Thank you so much. My book was bad-written and you helped me.
Very well done, thank you for this. Looking forward to more.
Really good intro, thanks for the help getting started!
Great step by step guide
Great step-by-step guide. I hope to see more content like this, perhaps progressing from simple to complex. Excellent work, regardless.
This man is my hero! YOU ARE MY HERO!
You have come back and upload more videos. Your content is very informative
very useful video, please do more videos like this!
Hi! is it not needed to use simple pdu like a switch to another switch in different network to check if there's connection?
I have a cisco project to make for college, and one of the tasks was "configure static routing so each device can communicate with another". Do you know how i do that?
im ur 1000th sub
Just a question why you did not configure the switch no need for it? ty
Yes, notice the only thing he configured were IP addresses on the router interfaces (g0/0 & g0/1) and the IP addresses for the end points (PCs).
These switches are L2 devices, and do not require IP addresses for communication. Only for remote access, which is another topic.
I know I’m late but, oh well! Lol
Thnx bro 😅❤ u really helped me out
Thanks for the help :)
Can you please configure printer with same PCs
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
Super Bro
nice video best explanation keep it up friend
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
Do we have to use the CLI to do the configuration?
very good!!!
well done
thanks a lot, subscribed and liked. Please do more
how do you know what ip address to apply to the router?
You can decide for yourself. But in real life there are organizations that decide this.
@@saimirfan902So you can just write ip adress 2526237 or what does the 168.162 stand for?
How to design anetwork having two enddevice,two routers and a cloud
is the router by default allow all traffic from one port to another on its firewall, bacause you put 192.168.1.1 255.255.255.0 on g0/0 port and on g0/1 is was 192.168.2.1 255.255.255.0... if the router by default firewall rule allow all all that is fine, but if the other way around.... it is more sense if the ip of g0/1 is 192.168.1.2 or up to .254 255.255.255.0, base on the goal you want to do is send data from pc 39 to pc 42
hi i can provide cisco packet tracer topology teaching （I can also provide homework help if you are completing your assignments） if you need you can tell me your contact details
What type of network topology is this?
tree i supose
thanks for the help mr. subbed
Sir part 2 with little brief and using more devices
Thank you so much!!!
most of the other videos did not show the default gateway part idk how it worked for them but thankyou ....
good video. thanks
thanks mate my staff was suffered to take this
I can’t send message to each pcs tell me why
Great Thanks
When I click on pc it doesn't show fast ethernet
where his g0\0 come?
What to do if it still not communicating ?
Can You Make a Net work that has 4 routers and 2 switches and PCs are connected to PCs.
Need more videos my guy
Thanks Bro
can you change 1 pc into a printer?
thank you so much!
Life saver
thank you so much
Thank you
Its not working 😢😢😢
😂😂
More videos man
Isac Light
Script kals bhai explanation ga beka
.
huinya ebanaya
Thnx bro 😅❤ u really helped me out
thank you so much
thank you