How to reset Error Canon iR 2016/ 2018/2020/2022 solution code: E000-0000, E001-0000, E002, E003.
HTML-код
- Опубликовано: 17 сен 2024
- How to reset Error Canon iR 2016/ 2018/2020/2022/2025/2030 / 2318/ 2320/iR 2420/ 2422/1600/2000/
2010/1600/2000/2010 solution code: E000-0000, E001-0000, E001-0001, E002-0000, E003-0000, E003-0001.
Code: E000-0000
Fixing temperature abnormal rise. The temperature detected by the main or sub thermistor does not rise to the specified value during startup control.
Remedy: Check the fixing film connector. - Replace the
fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Code E001-0000
Fixing unit temperature rise detection (by main thermistor). The main thermistor detected an abnormally high temperature (240 deg C) during temperature control.
Remedy: Check the connector of the fixing film unit. Replace the fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Code: E001-0001
Fixing unit temperature rise detection (by sub thermistor). The sub thermistor detected an abnormally high temperature (295 deg C) during temperature control.
Remedy: Check the connector of the fixing film unit. Replace the fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Code: E002-0000
Low temperature during temperature control. The target temperature is not reached during temperature control.
Remedy: Check the connector of the fixing film unit. Replace the fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Code: E003-0000
Abnormally low temperature (detected by main
thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Remedy:Check the connector of the fixing film unit. Replace the fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Code: E003-0001
Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation.
Remedy: Check the connector of the fixing film unit. Replace the fixing film unit. Replace the DC controller PCB.
★ ★ ★ ★ ★ ★ ★ ★ ★
Sir ,
Canon 2004n may, error- E001-0000
Keaya problem hay ???
Please answer
Canon iR2000
Error Code: E0O1
Description:
The main thermistor reading reaches 220°C or
higher (fixing high temperature error)
Remedy:
1) Wiring ls the connection of the connector
(CN8) on the power supply PCB and the
connector (J103) on the DC controller PCB and
the wiring to the fixing assembly normal? NO:
Correct the connection and wiring. 2) Fixing
assembly Try replacing the fixing assembly. Is the
fault corrected? YES: End. 3) Power supply PCB,
DC controller PCB Try repacking the power supply
PCB. Is the fault corrected? YES : End. NO:
Replace the DC controller PCB. 4) Error With the
power switch ON, clear E000 through E004; then,
turn off and then on the power switch.
@@TechHumayunkabir
Thanks , ❤️❤️❤️❤️
Sir, humko kis chis ko change korna paraga ???
@@krish87677 reset kar do
@@krish87677 ruclips.net/video/1DAfonmOODI/видео.html
Thank🙏🏻🙏🏻🙏🏻
Explain and write
how to fix E000007-0001- thanks- Any idea
আসসালামু আলাইকুম। ২০২২ পেপার জ্যাম হয়ে যায়, ড্রাম ইউনিটের নিচেই থেকে যায়। দয়া করে বলবেন কি সমস্যা থেকে হচ্ছে
ড্রাম বা সেপারেশন রোলার হয়তো ঘুরে না, তা ভাল করে সেক কর। তাছাড়া ক্রাসফিট হচ্ছে না। ক্রাসটি পরিস্কার কর, ক্রাসটি পীছনের কভার খোলে মাদারবুডের নীচে পাবে
Good, but too slow to show it.
Thanks for the comment, because many have trouble understanding.
hey bro i want to know how to connect ir 2022 with usb??
You can install USB printer driver from Google but not scanning with USB.
how to solve the error E261 canon ir 2018?
Code: E261-0000
zero-cross signal error
If failed to detect zero-cross signal cycle of the power supply when initializing. When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment.
Replace the power supply PCB. - Replace the DC controller PCB.
Canon ir 2420E000007-0000 ফিলিম অল সেট নিউ তার পরেই হয় না কেন ভাই এটা কোন বডে থেকে হস্ছে ভাই
Fuser flim জেম হয়ে যায়, Fuser flimমের ভিতরে রং করা আছে তা মেশিনে কুপি করার সময় গরম হয়ে hiterরের সাথে আটকে য়ায়, পরে ঠান্ডা হলে free হয়েছে যায়। original flim লাগান।
Sir meri mashin me error code E000064-0003
Enter the medal number of the machine.
Como resolver erro canon imageRunner 2204
O que você quer saber sobre a Canon 2204? Escreva o erro.
@@TechHumayunkabir Erro E350-0000, como eliminar
2016j197কোড দেখাচ্ছে কি করবো
পাওয়ার সাপলাই বোটের বা স্কেনারের কনেকশনের সমস্যা হতে পারে, resolution করুন।
CANON 1R 2022 E355 ERROR
Mismatched serial number between the SOFT-ID, the Flash Rom and the FRAM.
canon ir 2420. E000-100-0000
Error code: E100-0000
Replace the drum unit Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB.