This is what it means to listen and treat your customers with respect. Due to numerous requests, it has been fulfilled. Thank you simagia and good luck in mastering new products)) maybe the traffic system is just around the corner🙏
Weird choice using unbrako screws, I had to use a drill to get mine out when I was to add more padding. Used my own star screws which actually could handle screwing... Short cables make cable management hard, because I cant hide the controlbox.. You would have thought simagic listened to the feedback regarding this on the p2000 controlbox but no..
@@simagicofficial6890 Let's hope because according to the video we will almost not have the possibility of running the Cable along the arm of the pedal to make clean and discreet wiring
They are in fact too short to hide the wires. I’m in process of building my new rig around an Alpha U and P2000 . I’m only using 1 haptic motor with 2 pedal set up and I may end take it off as the wire is to short for me.. I do not want wires showing as it makes it look tacky. I can’t do this as it then means I can’t hide the control box and power supply. Sorry but it’s way too short.
Dears, I have the P2000 pedals that were absolutely perfect. Yesterday i bought the haptic motors, did all the necessary to attach the motors to P2000 pedals but....now throttle is flickering a little bit...and i don't know why. I kept the ground cable as before, could be this one the problem?
Please tell me the cables coming off haptic units are longer than they look in this video. I do not want that control box sitting in between my petals. Also, we need to buy a new control box It looks like.
The cables are not longer than shown in the video. It is a terrible design flaw. They are about 30cm/12inch. You have to buy extensions if you want to place the control box anywhere else but on the pedal tray.
Wish you had an official reseller in mexico-central america, its really hard to ship it without increasing A LOT the final prices :/ just placed an order of the alpha u + fxpro and p2ks (Florida oficial reseller.. nice 10% extra..) to arrive in 20ish days (hopefully) 2024 will be a good racing year :)
Just in case anybody is considering Simagic products. I installed the shakers to my fanatec pedals, and the result was that the connection from my wheelbase to my iracing simulator was destroyed. And I can't get it back. Fanatec refuses to help me, so I'm forced to buy new equipment. I wanted to anyway, but if you can't afford it, don't risk it.
You would only need one power supply and one control box no matter how many haptics you are running😉However you need to match the amount of brackets to the amount of haptics that you're running
This is what it means to listen and treat your customers with respect. Due to numerous requests, it has been fulfilled. Thank you simagia and good luck in mastering new products)) maybe the traffic system is just around the corner🙏
Simagic you guys have out done yourselves yet again. I cant wait to buy these for my P2000 pedals.
Weird choice using unbrako screws, I had to use a drill to get mine out when I was to add more padding. Used my own star screws which actually could handle screwing...
Short cables make cable management hard, because I cant hide the controlbox.. You would have thought simagic listened to the feedback regarding this on the p2000 controlbox but no..
Yeah I pretty much 99% just rounded one of mine just now and some how with the 1% left, managed to only just get it out
Hype hype hype but The Simagic Haptic Reactor pedal cables are short, right?
Should be more than enough for the purposes they're for😉
@@simagicofficial6890 Let's hope because according to the video we will almost not have the possibility of running the Cable along the arm of the pedal to make clean and discreet wiring
@@simagicofficial6890 can we use some kind of extender cables ? juts suggestion, you should offer longer cables as option. thank you,
They are in fact too short to hide the wires. I’m in process of building my new rig around an Alpha U and P2000 . I’m only using 1 haptic motor with 2 pedal set up and I may end take it off as the wire is to short for me.. I do not want wires showing as it makes it look tacky. I can’t do this as it then means I can’t hide the control box and power supply. Sorry but it’s way too short.
Dears, I have the P2000 pedals that were absolutely perfect. Yesterday i bought the haptic motors, did all the necessary to attach the motors to P2000 pedals but....now throttle is flickering a little bit...and i don't know why. I kept the ground cable as before, could be this one the problem?
Please tell me the cables coming off haptic units are longer than they look in this video. I do not want that control box sitting in between my petals. Also, we need to buy a new control box It looks like.
@@blue84x67 I actually found some extension cables on Amazon for 10 bucks and put the control module back underneath where it was before.
The cables are not longer than shown in the video. It is a terrible design flaw. They are about 30cm/12inch. You have to buy extensions if you want to place the control box anywhere else but on the pedal tray.
Hi, I have a question? Does this Simagic haptic pedal reactor also work with PlayStation 5?
Good .now i can install haptic motor on my p2000 pedal😊😊😊
Wish you had an official reseller in mexico-central america, its really hard to ship it without increasing A LOT the final prices :/ just placed an order of the alpha u + fxpro and p2ks (Florida oficial reseller.. nice 10% extra..) to arrive in 20ish days (hopefully) 2024 will be a good racing year :)
Nice work again Simagic!
Hey Simagic this is a dream came true, question will this replicate engine vibration ETC ?? or just ABS ?
There are more feedback options in the works! Though this suggestion is a interesting one for sure...🧐
How loud are the motors for haptic feedback? What does it sound like?
hi, how can i make this simagic haptic pedal reactor work on gt7?
I'm waiting for a p2000 inverted hydraulic brake kit I have a simlab inverted pedal rack collecting dust.
get a flex tube to make sure the reservoir is pointing in the right direction :D
is it working on VRS pedal ?
Just in case anybody is considering Simagic products.
I installed the shakers to my fanatec pedals, and the result was that the connection from my wheelbase to my iracing simulator was destroyed. And I can't get it back.
Fanatec refuses to help me, so I'm forced to buy new equipment.
I wanted to anyway, but if you can't afford it, don't risk it.
if i purchase two haptic motors one for brake and throttle. Would I need two PSU's for each one?
You would only need one power supply and one control box no matter how many haptics you are running😉However you need to match the amount of brackets to the amount of haptics that you're running
Thank you. I ordered two haptic motors + One control box and two sets of brackets for the brake and throttle. @@simagicofficial6890
Simagic should make base plate pedal p1000 as accessories for p2000 pedal... because all wiring can hide under the base...😂😂😂
OMG🙌🏼✊👌💯where can I get some now
You can get them through our distributors now!😉full list here: en.simagic.com/experience?typ=0
Need these adapters for other pedals until you come up with an elastomer-free solution
🔥🔥🔥
good game