How To Begin And End A Hemp Necklace With Minimal Knotting | Professionally Finish A Hemp Piece
HTML-код
- Опубликовано: 28 авг 2024
- Hey guys! I hope this video finds you well and happy! I made this simple video just showing how to begin and finish a hemp necklace with as few knots as possible. I hope that this helps you and makes things easier and more fun for you!
Remember to tag me on Instagram @thecraftnut with the things you make! I would love to see your work too!
If you dont want to make anything but you love something you see I would love to make it for you! Contact me on Instagram @thecraftnut or at thecraftynutt@gmail.com
Happy Creating!
Peace Love Music
This work is copyright of The Craft Nut © Mystee Bardgett 2019. All Rights Reserved. Any redistribution or reproduction of any part of this pattern and the intellectual work therein is prohibited. You may use the pattern for your personal use, and non-commercial use. You may sell your items made from this pattern, referencing back whenever and where ever possible. You may not, except with my expressed written permission, distribute or commercially exploit the content. Nor may you transmit it or store it in any other website or other form of electronic retrieval system.
Best DIY hemp necklace tutorial I've seen thus far. Very descriptive yet simple, Thank You!!
Sweet detail. I haven't made a hemp necklace in 20 years, but you've got me excited to make one again. Cheers!
You have the BEST closure of all the videos I've seen!! LOVE IT!!
I needed a refresher course bc my daughter and I are going to be making some summer ankles. The safety pin hack is genius and so much easier and messing around with tape or a clip board. Thanks so much! ❤
I’m so glad to be of help! ☺️☮️💙🎶
I am a beginner and this is just...BRILLIANT!!! Thank you very much for sharing...i was thinking of a way to reduce the number of knots i was making in my practice pieces. I was just scrolling and your video just popped up without me searching for it.
I love that! I am so glad this is going to help you ☺️☮️💙🎶
This is the best beginning and ending I have seen!
I’m so glad!! 😊😊☮️💙🎶
This is exactly what I needed! Thank you so much.
🙏☮️🤍🎶
Thanks! I am out of clasps, and needed a simple tutorial to end my bracelet without a huge, bulky knot.
☮️💙🎶
This is such a good tutorial! Will definitely be using this for my crystal necklace
I’m so glad! Thank you! ☮️💙🎶
I just started making hemp necklaces and this was a huge help! Thanks for the great video!
Absolutely!! Thank you!! 😊☮️💙🎶
this helped me with my necklaces for my business. Thank youu so much!
So glad it helped! Thank you! 🙏☮️💙🎶
Brilliant! And the clip on clothes idea is amazingly clever! Bravo !
I’m so glad you found it helpful!! 😊☮️💙🎶
You're amazing. Your channel is great. So many cool diy ideas. Much Love.
Awe thank you so much! I am glad you like it! 😊☮️💙🎶
Thank you for sharing this! I have always hated the knots. Now I can finally make a bracelet.
I know what you mean! ☮️💙🎶
Great video! Thank you for explaining such a great technique clearly and understandably!
Glad you enjoyed it! Thank you for your kind words! ☮️💙🎶
Thank you for this 🥺 it was easy to understand and not super complicated ❤️
I’m so glad it worked well for you 🙏☮️💙🎶
I sense your sarcasm
I love the way you ended this!!! Thanks!
I’m so glad you like it!! Thank you!! 😊☮️💙🎶
This! This is what I’ve been looking for. Thanks for existing :)
Absolutely! Thank you! 🙏☺️☮️💙🎶
Thank you!! You are so helpful!! Finally!!!
Ive never liked having my end anchored. I just hold it up in the air. I hope to learn something today, ive tied 10 necklaces this weekend and am looking to learn anything i can to improve before i figure out how to open an etsy store.
very interesting! it’s too willy nilly for me if i hold it. my knots come out a lot more uniform if i anchor it. hope this helped you learn a few new things! ☮️💙🎶
Perfect video. Just what I was looking for. Thank you for posting!
😊😊🙏🙏☮️💙🎶
😊Exellent!!!!!
Cool video. Maybe it’s just me but that seems so confusing. I guess I learn by doing.
That looks so much cleaner!
🙏☮️💙🎶
Really great job!!! 👍🏻 💟
I wish you showed how you close the necklace to wear because I have never seen anything like this. Its beautiful. I am learning to make hemp necklaces and would love to see more patterns!
I kind of do but I understand where it could get lost in translation. You will want to make your loop just slightly bigger than the bead you are wanting to use to close the ends together. Then on the other side with the bead you will connect the bead like it is shown 😊 this is shown and somewhat explained in the beginning and end of the video, hopefully that helps 😊☮️💙🎶
Super cute 👍
Ty so much for this!! ❤
Excellent video
Super helpful, thank you😀
🙏🙏☮️💙🎶
Thank you so much ;) great teaching style :)
☮️💙🎶
Thanks Nut!
😂🙏☮️💙🎶
That's cool! Thank you!
😊🙏🙏☮️💙🎶
Awesome, thanks.
The way you ended it though,. If you pull on the rope with the bead on it it pulls out of the necklace. I only did 5 stitches and that wasn't enough to keep the loop in place. How do you prevent this. More stitches?
Yes definitely more than five stitches. I usually do about ten if I can that way it gives it enough room to hold onto that string. I also work the last stitches as tight as I can to prevent that from happening! ☮️💙🎶
Awesome thanks
Very. Ice how you did this but I'd like to see it closer, maybe even slower making half the necklace. I don't understand how to twist. Is it all the same knotting.
yes all the same knotting
Best video thank you!!!
😊😊☮️💙🎶
That was great. xo
Do you have any advise on how to stop the ends from fraying? Just to make it easier to add the beads if that hole is on the smaller side?
I either use a piece of tape to keep it stiff and try to get it through the hole or I use a little bit of elmers glue on the end of the string and let it dry, I particularly like the glue when there are two or more strings cause you can twist them together with the glue on them and basically make them one string. Hope that helps! ☺️☮️💙🎶
@@TheCraftNut thanks a bunch the glue works great!
Interesting 👍👍👍
Me at 2:01 HOLY S**** I DID IT !!
Whoot whoot!!!! 💃🎶
@@TheCraftNut wait till you see my finished necklace(s)!!!
Can’t wait!! Tag me on Instagram!! 😍☮️💙🎶
GRACIAS🎉🤍👏 POR COMPARTIR🌷⚘ .🕊.DIOS BENDIGA ESTE CANAL..Y DIOS BENDIGA A TODOS ..SEAN TAN AMABLE⚘🌷 DE HACER MAS EXELENTES VIDEOS COMO ESTE .
.MUCHISIMAS GRACIAS.❤🎉
I’m trying to connect my necklaces but they are in individual pieces. For a dangling layered crystal necklace. Thank you.
Are you needing help with anything? Just confused as to what’s going on?? Would love to help! 😊☮️💙🎶
Very nice thanks
🙏☮️💙🎶
could you explain why, at the start, a 3rd string (11 inch) is used to tie the knot around the other two length cords? can you just use the two lengths to make a knot? i have add and a lot of tutorials are really hard for me to follow.
There are four string because you need two to tie and two to tie around ☮️💙🎶
@@TheCraftNut Hello. What are the measurement of the 2 string? TIA
Hello! What size string and bead is that? I ordered 1mm hemp and 8mm beads. Is that what you use?
I honestly am not sure I’m sorry I just use what I have on hand most times ☮️💙🎶
I go it
Question how do you know how much to use I wanna make like a 21inch necklace?
I tend to use 2-3 times as much as I am making it long. So I would use 42-63 inches
nice video dear
Thank you 🙏☮️💙🎶
Did you mean to say an 11 FOOT knotting piece of vine? I am new to this but that is confusing? Did you mean 11 inches?
Yes I meant to say an 11 foot piece of hemp folded in half for knotting. It takes quite a lot of hemp to make a whole necklace. I also don’t switch out the pieces that I am using to knit, I use the same piece all the way through. ☮️💙🎶
What size bead is used for the end of necklace?
You can use what ever size bead you would like ☺️☮️💙🎶
So your making macrame square knots 🪢
Yes ☺️☮️💙🎶
Thank you! instagram.com/p/B3eVT41HEMr/ : )( :
Love that!! Love that you put it on Instagram!! If you want to tag me in the caption of the photo or in the comments I'd love to feature it on my page!
@@TheCraftNut thank you again :) .....and sure, I will if you'd like.
@@acemanhomer1 thank you so much!! ☮️💙🎶
@@TheCraftNut no problem, thank you too
@@acemanhomer1 of course!! ☮️💙🎶