How To Fit A Camper Van Roof Vent | Thule Omnivent Fitting Guide | DIY Camper Conversion | 006
HTML-код
- Опубликовано: 29 ноя 2024
- How To Fit A Camper Van Roof Vent | Thule Omnivent Fitting Guide | DIY Camper Conversion | 006
In this Transit Camper Conversion episode, I installed a Thule Omnivent Roof Vent with a fan into the roof of my Transit Minibus.
Here's what I used in this video:
Thule Omnivent: ebay.us/B9dgmg
Mastic tape: ebay.us/y6hZXt
Sikaflex 522 Sealant: ebay.us/Pae2s2
It can get very stuffy in a campervan, especially when you are sleeping or in there for a long time. The accepted wisdom is to put in roof vents so that the warm air can escape upwards. To help this a fan is usually installed in the vent.
I managed to find a second hand Thule Omnivent for half price, but I would have bought a new one if I hadn’t been that lucky.
Cutting the hole is very nerve-racking. You need to make sure that it is square, as well as in the right place. But taking our time and using Pythagoras we did it fine. We used an air saw, mainly because it was easily to hand, but a jigsaw would have been fine.
To clamp the vent in place we made a framework out of 36mm by 24mm timber. Better woodworkers than us would have made it perfectly, but our effort worked very well. We just needed to make sure it was square before tightening the clamps to the vent.
Because the roof was uneven we needed to use Mastic Tape to make an even surface for the vent to sit on. We then used Sikaflex 522 adhesive sealer to complete the waterproofing.
To test the van we used some existing wiring, but when we complete the wiring of the van we will run it from the leisure battery system.
For more helpful how-to guides and restoration project logs, visit our blog: www.spannerras...
As an Amazon Associate, Ebay Partner and Awin Affiliate, we earn a small commission from qualifying purchases. Some of our links are affiliate links, and if you decide to purchase things through them, we earn a small commission. It costs you nothing but helps us to keep the content coming. Thanks for your support!
This video was really helpful! thank you 🙃
Thanks Ellie, I'm glad it helped you out! 😁
I'm a fan of yours!! Nice one 😃 👍
Thanks for your Video. It's now 2 years old and im curious to know if you had any water coming in at your roof vent.
Ive read a guideline that says you should compress the mastic/butyl by 50% so it has best sealing performance. In your case you stack 6x2.5mm =12.5mm an compress rhe upper two stacks.
Your answer would give me confidence to get a second vent. Cheers
There was no problems with water coming in around the vent at all. Although I have now moved on from that van, the subsequent owner, who has been in touch occaisionally, hasn't had any issues. I hope this helps.
Good job !😊
Thank you!
I've not seen those clamps before! Do they come with the window?
They came with the one I bought. Very useful.
How many tubes of sealant did it take to do that job? Was it more than 1 ?
I suspect you could make do with one. But I did start a second tube, but I think we were generous with it. Good luck.