@Somnathhalder914 1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground. 2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Hello, 1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground. 2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Bhai jab mai alt hold mode mai 50% throttle deta hu uske baad motors apne aap rotate hoti hain or potantial throttle loss (3) ka massage show hota hai pleaae koi sollution dijiye
@@Trymbak13 if not then connect your drone to your desktop/laptop and go to esc calibration and click it then disconnect the usb from your desktop/laptop, then connect the battery to your drone and wait for the esc calibration sound to go and then your problem will be fixed if your motors, escs and battery has no issues!!!
bhai stability nahi aa rahi suddenly thrust jerks aa rahe hai , mai throtle stick 20% pe rakh raha hu but still suddely kabhi bhi drone ka thrust increse ho raha hai aur drone gir ja raha hai
@@kaustubhshriyam3278 try to calibrate your esc then fly your drone in stabilize mode, do not put her in altitude hold mode, once you get comfortable in stabilize mode then fly in altitude mode!!!
This happens when your gps do not connect with sufficient sattelites, for safe loiter mode flight you need to get connected with atleast 12 sattelites, try to go out side of your room or a bigger open place I am sure your problem will get resolved!!!
Hi Somnath, First of all your drone videos are very engaging and helpful. Thanks you so much for posting these. I am facing a problem. I have Radiolink Crossflight controller. I have calibrated all its paramters on Mission planner software. Not when I tried flying it gets flipped to 1 side only. I have also seen that when i push 30% throttle on remote then only 1 motor runs and when I give 40% throttle then 3 motors run and when its 50% then all the motor starts running. Can you please tell me what should i do, so that it does not gets flipped to 1 side and gives balanced takeoff flight? Also the motor running mismatched is the cause of flipping and if yes whats the solution to it?
arm nahi ho pata kabhi kabhi, message aata hai mission planner mein ki - prearm: battery is critical failsafe < low . But battery full charged hai 12.5 volts hai. failsafe mein maine 10.1 volts save kia hua hai. Aur battery monitor mein bhi sahi dikhara hai battery 12.49 volts. To issue kahan par hai. Please help
Mere sath bhi ye problem hota hai kabhi kabhi, battery ko kholkar dobara lagane se thik ho jata hai, may be the voltage and current censor in the flight controller sometimes gives faulty values, it does not cause any serious problem in my case, all I do is unplug the battery then plug again.!!!
Bhai gps neo7m ki wiring batao please
Is this mini pix the same as the holybro mini pix 6C?
Sir, How to setup OSD cable and Micro SD Card...
Bro konsa gps module use Kiya hai apne ?
@@FXZElectronic m8n
@Somnathhalder914
1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground.
2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Can I please get ur personal contact your help is required on this plz...
Hello,
1. I am using DJI naza as my flight controller. My drone take off is stable, but when I use roll or pitch then it struggles to get stable (wobbles) and flips downwards to ground. Can you pleass help me with my problem... its flipping to ground.
2. I am using Fs i6 transmitter. When I place throttle stick above 50% then motor speed increases and at almost 80% movement of throttle stick motor is at max speed. But when I decrease the throttle stick the motor speed does not decrease till throttle stick is 50% or below.
Bhai jab mai alt hold mode mai 50% throttle deta hu uske baad motors apne aap rotate hoti hain or potantial throttle loss (3) ka massage show hota hai pleaae koi sollution dijiye
@@Trymbak13 did youcalibrate your esc?
@@Somnathhalder914 yes
@@Trymbak13 if not then connect your drone to your desktop/laptop and go to esc calibration and click it then disconnect the usb from your desktop/laptop, then connect the battery to your drone and wait for the esc calibration sound to go and then your problem will be fixed if your motors, escs and battery has no issues!!!
bhai stability nahi aa rahi suddenly thrust jerks aa rahe hai , mai throtle stick 20% pe rakh raha hu but still suddely kabhi bhi drone ka thrust increse ho raha hai aur drone gir ja raha hai
@@kaustubhshriyam3278 try to calibrate your esc then fly your drone in stabilize mode, do not put her in altitude hold mode, once you get comfortable in stabilize mode then fly in altitude mode!!!
Bhai mera mai 13 v hi dikha rha hai
mera esc calibration nahi ho ra hai
Bhai no gps likh rha ready to sky ka hai m8n help kr do
This happens when your gps do not connect with sufficient sattelites, for safe loiter mode flight you need to get connected with atleast 12 sattelites, try to go out side of your room or a bigger open place I am sure your problem will get resolved!!!
Sir can I get your number,
I have to show my project and very less time is left. Plzz help me sif
@@YuvrajSingh-ux4vv somnathhalder914@gmail.com send your contact no in this mail I will contact you
Ok thank you so much sir
Hi Somnath,
First of all your drone videos are very engaging and helpful. Thanks you so much for posting these.
I am facing a problem. I have Radiolink Crossflight controller. I have calibrated all its paramters on Mission planner software. Not when I tried flying it gets flipped to 1 side only. I have also seen that when i push 30% throttle on remote then only 1 motor runs and when I give 40% throttle then 3 motors run and when its 50% then all the motor starts running.
Can you please tell me what should i do, so that it does not gets flipped to 1 side and gives balanced takeoff flight? Also the motor running mismatched is the cause of flipping and if yes whats the solution to it?
arm nahi ho pata kabhi kabhi, message aata hai mission planner mein ki - prearm: battery is critical failsafe < low . But battery full charged hai 12.5 volts hai.
failsafe mein maine 10.1 volts save kia hua hai. Aur battery monitor mein bhi sahi dikhara hai battery 12.49 volts.
To issue kahan par hai. Please help
Mere sath bhi ye problem hota hai kabhi kabhi, battery ko kholkar dobara lagane se thik ho jata hai, may be the voltage and current censor in the flight controller sometimes gives faulty values, it does not cause any serious problem in my case, all I do is unplug the battery then plug again.!!!
Hi how to contact you