@@tiniustreider9466 because, it doesnt make sense. The comment is stating that "it feels like they are turning R and U moves only". But the reply is telling what he already knows. Which is weird, of course they are turning with their right hand and using the top finger is easy. It doesnt explain anything at all.
Its cool how there are different methods to solving certain layers. I just learned how tp solve a rubiks cube, and ill be setting this as my next goal!
@@Lukcarrotif it gave u H perm then you excuted the alg from wrong angle . E perm can be excuted from 2 angles and the rest of the times ( ie incorrect angle) will give you a H perm .
I just imagine that its a burger first the top wich going down and back then we have the meats and veagies so up down left or rightthen we have the bottom bun
this is why i feel like he should mention this case is called the e perm and that algorithm will only solve an e perm and not "the last four corners" in general
@@doraemonoldvideoso basically after you have solved the first 2 layers u use oll which brings all the yellows at the top as u see in the vid then u use 2 steps of pll which solves the corners in one part and edges in the other. This is one of the steps of pll
@@ironic8340 we're talking about the E perm, one of the easiest PLL algorithms. and even beginner cfop users at the 30 second mark should know full pll
@@zaynab27 denotes the difference between moving just the outer layer(capital letters) vs moving 2 respective layers together(lowercase letters). A ' in front of a letter denotes clockwise or anticlockwise. R would be a clockwise turn of the right layer while R' would be an anticlockwise turn of the same layer.
When i search for this e perm algorithm, it always shows the L U version but im better at using my right hand so i looked for an R U version which is exactly the one in your video
Hi, can I ask? I just bought a rubik's cube, and stupidly I scrambled it out of order. When I look at the toturial on ytb, I position the yellow center at the top, and the green center facing me. but I found a difference, where my red center was on the right side, and the orange center was on the left side. It looked different from the Rubik's video I watched.
Развлечения
![Sean Rii, Karyon, Sharzkii - Taungule [My Love] (Official Music Video)](http://i.ytimg.com/vi/eJoMuypbSzQ/mqdefault.jpg)
I will definitely put this one into practice!
Same
Same
When i look at speedcubers it feels like they are only doing r and u moves
They do it because it’s usually easier and more precise to turn the side with their right hand and turning the top with your left finger is quite easy
@@Supergoat1332what a weird reply
@@Minjeyo_why
@@tiniustreider9466 because, it doesnt make sense. The comment is stating that "it feels like they are turning R and U moves only". But the reply is telling what he already knows. Which is weird, of course they are turning with their right hand and using the top finger is easy. It doesnt explain anything at all.
@@Minjeyo_I think he thinks the og comment wasn't talking about prime moves
Its really useful the fact you dont regrip
You regrip at the beginning of the alg. The nice thing about this e perm is that you get AUF on the U face and not the F face
no, u can do it without regrip at the beginning, just get good
insanely unergonomic lmao@@danggumball5730
@@danggumball5730The hell kind of fingertricks are you using. Thumb on B face is mad 💀
@@MyoKyawKhant probably a rolling R’ (lift the thumb off the cube and do an R’ with either of your fingers)
step 0: get a good cube
Can't
That’s so true
$8 Amazon easy. Or $14 but it's not that hard or expensive lol
@@Mason-is4mr Bro even if it's $1, I would still feel pain. Forget about $8. That's sky high expensive.
@@nirnaysinha8864The Rubik’s brand cube is literally more expensive, if you spend 8 dollars you can get a good functioning budget cube
I tried this all in the beginner method and all it did was put the corners in their correct spot
This is not beginners method
I love the color scheme of the MoYu Weilong v9 special edition the blue internals look sick
Thank you for helping me solve the formula
Never thought an E perm could be good
Im used to the convencional e perm tho
I've always used this one, one of my favorite algorithms 😅
It requires a certin case?
I learned the left version that includes a rotation at the beginning (though it feels more like a r' regrip)
Its cool how there are different methods to solving certain layers. I just learned how tp solve a rubiks cube, and ill be setting this as my next goal!
I love me a perfect rotationless e -perm
Ah, yes, Timon Kolosynski
Non cubers: here is a much easier one it has one less move! Oh wait i forgot it
Cubers: E perm go brrrr
I like how dani has influence over the cubers too 😂( I guess)
I'm already using this E perm. Great alg, probably one of my favs
I use the inverse but I should probably switch
Yeah idk who’s teaching the inverse of this to you guys
@@Eddievak no one lol I figured it out myself
@@svoda Lol yeah I found the same thing and have been using the inverse, did you end up switching?
@@LucyDogGuy nah, I actually ended up using the standard alg (it’s consistently sub 0.9 for me)
@@svoda alright, thanks
I like the e perm, it’s slow for me but it’s fun to execute. I used to do it the wrong direction lol
I prefer the commutator algs for tht case
Ain’t no way bro made me just do it so I had the same cube
Thank you❤
Thanks
The original e perm has rotation as well as we have to regrip also , i will try this 👍
Can’t figure out what I’m doing wrong but it won’t work
Same
Did it turn into H perm?
Only works on two sides
That's E perm
@@Lukcarrotif it gave u H perm then you excuted the alg from wrong angle . E perm can be excuted from 2 angles and the rest of the times ( ie incorrect angle) will give you a H perm .
How did u get ur oll solved at the same time ur yellow edges align with the yellow cross???
Thank you
Thanks super helpful
Its so funny when you try to say his name
Best E perm out there, fuck the standard alg
rotationless e perm?
Thanks I'm finally sub 5 at ally plls. I used to be sub 3😊
Gotta practice
fast in 4 seconds 🥵😎
thank you
I just imagine that its a burger first the top wich going down and back then we have the meats and veagies so up down left or rightthen we have the bottom bun
Would it work in every situation of last layer after matching all yellow?
No ,it's a PLL case
this is why i feel like he should mention this case is called the e perm and that algorithm will only solve an e perm and not "the last four corners" in general
This alg is literally the beginner method step but just put together
No its isnt... It literally isnt...
No?
@@DomenG33K it literally is
Just fix the corners, orient the edges, solve the 2 edges on the side then solve the rest
basically an e perm without the rotation
I actually already use this
Yes but the old E-perm is so fun and symmetrical... :'(
I will miss it.
Oh i think this is the easier solve/solution for the E perm PLL
I have no idea wats going on but it's cool to watch lol
It won't gonna work in 99% of situations
same it just wont work
If you don't know how to recognize the case then of course it won't work. But top cubers have already switched to this alg
?????
It’s an E perm
wtf?
I already know how to do the e perm
I always used this alogo for E perm
This reminds me of a ZBLL I know
a question my friend asked me is "Does it work on every side?
Don’t forget he got a below average solve using this e perm plus they both start with a regrip
E perm but no cube rotations. Nice
why homie hands so big 😂
This solve is very diff
Slow down 😂😂😂
It's possible to do this since you have a good cube.
My cube is so bad, I spend at least 5 seconds to make one turn.
Which cube u used in this video??
I dont know what i dud wrong but ut is not working
Did you do PLL before attempting?
@@benleonard1602 BTW I have the same problem and I am pretty sure I made no mistakes.
What's PLL BTW?
@@doraemonoldvideoso basically after you have solved the first 2 layers u use oll which brings all the yellows at the top as u see in the vid then u use 2 steps of pll which solves the corners in one part and edges in the other. This is one of the steps of pll
@@Zawarudo_tokiya_tomata ok. Thank you so much
Pls fast way to get middle top side layers solved
Soo good
Вы " шпарите " как " пулемёт " , я не успеваю всё это запомнить
can I apply it on PLL of CFOP ???
I tried this and it defo works. I finally solved my first ever rubiks cube 🥳
How to do the finger tricks
E perm ofc
It took me what felt like an hour dont know how long to get to the last step and I fucked it up and had to restart I was so pissed
I will use the standard alg. You don't even need to regrip
What rubix cube product is that?
What method ?
Did the world forget the word E perm
Yes, because not everybody is a CFOP master
@@ironic8340 we're talking about the E perm, one of the easiest PLL algorithms. and even beginner cfop users at the 30 second mark should know full pll
@@ironic8340you dont need to be a master for it you cant be real bro 😂
@@ironic8340the brainrot is insane
Dont use it, do a wide L into standered e perm instead of rotating and no regrips
Lmao bro thats a way worsw algorithm
@@mineq4967 it's the same length if not shorter, no re-grips and easier to fingertrick..... How is it worse
@@PhoenixTheCubernot good if you have to AUF after
@@patrickponce4838 that is true but it's not too hard to do
Thank you I’m more fast now
does the yellow part have to be fully solved to do this?
I hate how everyone just has their own terms for the cube like we're supposed to know like wtf is R2 cause looks Like it was just a normal R
He turned R twice.
what cube do you use
wrm v9 ball core I think
thx, Im looking to get a new cube for christmas
Noooooo, looks more like a moyu ys3m
@@user-jb6ix5gw5ii literally am holding a ys3m and it looks nothing alike, the ys3m is much flatter
Note that before you call this fake, I'm pretty sure this only works on 1 certain case.
Yea, I tried multiple times but it seems that it only works at cetain cases like what's shown in the video...
Well yea, it's an E perm
😭
What is this comment😭
@@WanAtiqi-kn3cf Do people watching these videos actually even cube? 😭
I still use the one with the x' 😂 ancient alg
You should change to this one then
In which angle it works? I returned to same position after trying
under what case can you use this algorithm?
Yes that's the question
e perm
E perm
Useful algorithm 😮
Does that only work if the yellow is solved?
I have no idea what those letters mean😅
look up cube notation
r stands for the right side of the cube
l is for left
u is for up
d is for down
f is for face
@@zaynab27little note is that letter capitalization is important in notation since lowercase letter signify wide moves.
@@Xeroc524 do you mean capitalization shows clockwise and anti clockwise moves?
@@zaynab27 denotes the difference between moving just the outer layer(capital letters) vs moving 2 respective layers together(lowercase letters). A ' in front of a letter denotes clockwise or anticlockwise. R would be a clockwise turn of the right layer while R' would be an anticlockwise turn of the same layer.
I just use E-perm
My average e perm is 3s 😅
already set
Is there a way the last layer has to be
Is there a specific way to do this like do you have to have all the yellow on the top or what?
Yes thats why it dont work in beginner method
Im going to practice this😊
Thank
Is this only for 4 corners
does this only work when no corners are solved?
Can you teach me middle column of Rubik cube ....
When i search for this e perm algorithm, it always shows the L U version but im better at using my right hand so i looked for an R U version which is exactly the one in your video
Alternatively u can take the LU alg and mirror it onto your right hand
@@gabrielsia4578 yeah
💚
Wow!!#thanks
How to get the.. the yellow facè
Any move? Its to long hahaha
i tried, now my cube is broken
I think the x version is kinda better though u have to regrip as it pretty fast
Are there any exceptions to this ? Or will work everytim? Evenwhen 2corners are wrong and 2 are right?
Hi, can I ask? I just bought a rubik's cube, and stupidly I scrambled it out of order. When I look at the toturial on ytb, I position the yellow center at the top, and the green center facing me. but I found a difference, where my red center was on the right side, and the orange center was on the left side. It looked different from the Rubik's video I watched.
I’ll stick with r prime d r1 d prime
It can also be used in 4 by 4 ???
.. a 3 by 3 and a 4 by 4 are totally different-
Yes
No@@xsxeno
yes duh